IIEST, Shibpur

Indian Institute of Engineering Science and Technology, Shibpur

(Formerly Bengal Engineering and Science University, Shibpur)

Empowering the nation since 1856

  • B. Mondal, A. Basumallick, P. P. Chattopadhyay, Magnetic Behavior of Nanocrystalline Cu-Ni-Co Alloys Prepared by Mechanical alloying and Isothermal Annealing, Journal of Alloys and Compounds 457 (2008)10
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Dilatometric Studies on Copper Added Titanium – Boron Steels, Steel Research International, 78(12) (2007) 903.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Effect of Pre - strain on the Ageing Behaviour of Directly Air – Cooled Copper Added Titanium – Boron Microalloyed Steels, Materials Science and Technology, 23(8) (2007) 929.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Effect of Copper Additions in Directly Quenched Titanium – Boron Steels, Journal of Materials Science, 42 (2007) 9453..
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Mechanical Properties of Directly Air Cooled Copper Added Microalloyed Steels, Materials Science and Technology, 23(11) (2007)1375.
  • B. Mondal, A. Basumallick and P. P. Chattopadhyay, Effect of Isothermal Treatment on the Magnetic Behavior of Nanocrystalline Cu – Ni – Fe Alloy Prepared by  Mechanical Alloying, Journal of Magnetism and Magnetic Material, 307(2007)290
  • A. Samanta, I. Manna and P. P. Chattopadhyay, Phase Evolution in Al – Ni – (Ti, Nb, Zr) Powder Blends by Mechanical Alloying, Materials Science and Engineering A, 464 (1-2) (2007)306.
  • D. Das, A. Samanta and P. P. Chattopadhyay, Synthesis of Bulk Nano-Al2O3 Dispersed Cu-Matrix Composite Using Ball Milled Precursor, Materials and Manufacturing Processes, 22 (2007) 517.
  • A. Samanta, P. P. Chattopadhyay, H. –J. Fecht and I. Manna, Development of Amorphous Phase Dispersed Al-Rich Composites by Rolling of Mechanically Alloyed Amorphous Al-Ni-Ti Powders with Pure Al, Materials Chemistry and Physics, 104 (2007) 434.
  • P. P. Chattopadhyay, A. Samanta, W. Lojkowski H. –J. Fecht and I. Manna, Microstructure/Phase Evolution in Mechanical Alloying/Milling of Stainless Steel and Aluminium Powder Blends, Metallurgical and Materials Transaction A, 38(13) (2007) 2298.
  • A. Sinha, S. Datta and P.P. Chattopadhyay, Development and Characterization of Ni-Ti dispersed Aluminum matrix composite – J.IE (I), MM Div, 87 (2006), 7.
  • D. Das, A. Samanta and P. P. Chattopadhyay, Mechanical Properties of Bulk Ultrafine-Grained Copper, Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 36 (2) (2006) 221.
  • D. Das, A. Samanta, P. P. Chattopadhyay, Deformation behaviour of bulk ultra fine grained Cu prepared by sub – zero rolling and controlled recrystallisation, Materials Manufacturing Processes,  21 (2006) 698.
  • Debdulal Das, Asis Samanta and Partha Protim Chattopadhyay, Properties of Bulk Ultrafine-Grained Copper, Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry (SRINMC), USA , 36 (2) (2006) 221
  • S.K. Ghosh, S. Ganguly, P.P. Chattopadhyay and S. Datta: Modelling the effect of Cu in microalloyed DP steel through neural network and neuro-fuzzy systems – ISIJ International, 45(9 ) (2005), 1345.
  • A. Samanta, P. P. Chattopadhyay, W. Lojkowski2 H. –J. Fecht and I. Manna, Microstructural Evolution During Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend, High Pressure Technology of Nanomaterials, September, (2005) 211.
  • A.K. Bhuniya,  P.P.Chattopadhyay, S.Datta and  M.K.Banerjee, Study on the effect of trace Zirconoium addition on the microstructural evolution in Cu-Zn-Al shape memory alloy, Material Sci. and Eng. A 391 (2005) 34.
  • A.K. Bhuniya, P.P.Chattopadhyay, S.Datta and M.K.Banerjee, On the degradation of shape memory effect in trace Ti - added Cu-Zn-Al alloy, Material Sci. and Eng. A 393(2005), p 125.
  • I. Manna, P. P. Chattopadhyay, P. Nandi, P. M. G. Nambissan, Positron lifetime studies of the hcp to fcc transformation induced by mechanical attrition of elemental titanium, Physics letter A, 328 (2004) 246.
  • I. Manna, P. P. Chattopadhyay, F. Banhart, H.–J. Fecht, Develeopment of Al-Cu-Zr Amorphous Alloy and Nano-dispersed Composites by Mechanical Attrition, Mater. Sci. Engg.A  397 (2004), 360.
  • S. K. Ghosh, A. Samanta and P. P. Chattopadhyay, Effects of ageing treatment on the microstructure and mechanical properties of Cu-added Ti, B microalloyed steels, Trans. Indian Inst.  Met. 57 (2) (2004) 171.
  • S. K .Ghosh , N. R. Bandopadhyay and P. P.Chattopadhyay, Effects of finish rolling temperature on the microstructures and mechanical properties of as hot rolled Cu – added Ti, B microalloyed dual phase steels, Journal of the Institution of Engineers (India), vol. 85 (2004) 41.
  • I. Manna, P. P. Chattopadhyay, F. Banhart, H. –J. Fecht, Development of Amorphous Al-Zr-Si Alloys by Mechanical Attrition, Materials Letter 58(2004) 403.
  • I. Manna, P. P. Chattopadhyay, F. Banhart, H. –J. Fecht, Solid State Synthesis of Al-based Amorphous and Nanocrystalline Al-Nb-Si and Al-Zr-Si Alloys, Zeitschrift für Metallkunde 94 (2003) 835.
  • P. Nandi, P. P. Chattopadhyay, S. K. Pabi and I. Manna,Solid State Synthesis of Al-based Amorphous and Nanocrystalline Al-Cu-Nb Alloys, Mater. Sci. Engg. A  359 (2003) 11.
  • I. Manna, P. P. Chattopadhyay, P. Nandi, F. Banhart, H. –J. Fecht, A Polymorphic HCP to FCC Change in Titanium by Mechanical Milling, J. Appl. Phy. 93 (2003) 1520.
  • D. Das, P. P. Chattopadhyay and N. R. Bandopadhyay, On the Modificationof Martensite Morphology in High-Martensite Dual Phase Steels for the improvement of Mechanical Properties, Jl. Of the Institution of Engineers (India), 84 (2003), 84
  • I. Manna, P. P. Chattopadhyay, F. Banhart and H. –J. Fecht, A Polymorphic Change in Zirconium by Mechanical Milling, Appl. Phy. Lett. 81 (2002) 4136.
  • P. P. Chattopadhyay and I. Manna, Effect of Partial Substitution of Cu in Al65Cu35 by Transition Metal in Mechanical Alloying of Al65Cu20TM15, Materials and Manufacturing Processes 17 (2002) 583.
  • P. P. Chattopadhaya, S. Datta, M. K. Banerjee, On the Formation of V-Phase in Mechanically Alloyed AlSiMg-SiCp Metal Matrix Composite with Trace Scandium Addition, Material Science and Engineering A, A 333 (2002)410.
  • P. P. Chattopadhyay and I. Manna, A Thermodynamic Model on the BCC to FCC Polymorphic Change in Niobium due to Nanocrystallization by Mechanical Alloying, Key Engineering Materials 227  (2002) 87.
  • P. P. Chattopadhyay, S. K. Pabi, H. J. Fecht and I. Manna,Phase Evolution in Binary Al-Cu (20 – 70 at. % Al) and Ternary Al65Cu20TM15 Alloys by Mechanical Alloying (invited article and received the best paper award), J. Inst. Engineers (India) 83 (2002) 35.
  • S. K. Ghosh, D. Das and P. P. Chattopadhyay, Structure Property Correlation of Ti, B  Microalloyed Dual Phase Steels, (received the best paper award),  Jl. Inst. Eng. (I), 82 (2001) 50.
  • P. Nandi, P. P. Chattopadhyay, S. K. Pabi and I. Manna, Development of Amorphous and Nano-aluminide Dispersed Al-matrix Composites By Mechanical Alloying, Materials Physics and Mechanics 4 (2001) 116.
  • I. Manna, P. P. Chattopadhyay, B. Chatterjee, S. K. Pabi, Codeposition of nanocrystalline aluminides on a copper substrate, J. Mater. Sci. 36 (2001) 1419.
  • P. P. Chattopadhyay, R. N. R. Gannabattula, S. K. Pabi and I. Manna, Development of Amorphous Al65-Cu35-x-Tix Alloys by Mechanical Alloying, Scripta Mater. 45 (2001) 1191.
  • P. P. Chatterjee, I. Manna, S. Talapatra and S. K. Pabi, A Mathematical Analysis of Milling Mechanics in a Planetary Ball Mill, Mater. Chem. Phy. 68 (2001) 85.
  • P. P. Chattopadhyay, P. M. G. Nambissan, S. K. Pabi and I. Manna, A Polymorphic bcc to fcc Transformation of Nanocrystalline Niobium Studied by Positron Annihilation, Physical Review B63 (2001) 54107.
  • P. P. Chattopadhyay, P. M. G. Nambissan, S. K. Pabi and I. Manna, Polymorphic Transformation and Lattice Expansion in Nanocrystalline Niobium Revealed by Positron Annihilation at Grain Boundary,     Applied Surface Science 182 (2001) 308.
  • P. P. Chattopadhyay, S. K. Pabi, I. Manna, On the enhancement of diffusion kinetics in nanocrystalline materials, Mater. Chem. Phy. 68 (2001) 80.
  • S.K. Ghosh, D. Das, P. P. Chattopadhyay, Structure Property Correlation of Ti, B Microalloyed Dual Phase Steels, Jl. Of the Institution of Engineers (India), 82 (2001) 50.
  • P. P. Chatterjee, S. K. Pabi and I. Manna, A Metastable Allotropic Transformation in Nb Induced by Planetary Ball Milling, Mater. Sci. Eng. A304-306 (2001) 424.
  • P. P. Chattopadhyay, S. K. Pabi and I. Manna, On the Inverse Hall-Petch Relationship in Nanocrystalline Materials, Z. Metallkde. 91 (2000) 1049.
  • Manna, P. P. Chatterjee, V. Srinivasa Rao and S. K. Pabi, Codeposition of Nanocrystalline NbAl3 Particles on Cu, Scripta Mater. 40 (1999) 409.
  • D. Das, P. P. Chatterjee, I. Manna and S. K. Pabi, A Measure of Enhanced Diffusion Kinetics in Mechanical Alloying of Cu-18 at.% Al by Planetary Ball Milling, Scripta Mater. 41 (1999) 861.
  • P. P. Chatterjee, S. K. Pabi and I. Manna, An Allotropic Transformation Induced by Mechanical Alloying, J. Appl. Physics 86 (1999) 5912.
  • P. P. Chattopadhyay and B. Ghosh, A Computer Aided Study of Solidification in Steel Casting, Trans. Indian Inst. Metals, 4(6)1(991) 475.
  • P. P. Chattopadhyay, Study of Directional Growth Behavior In Zn-Al alloy withy chill based solidification, J.  Inst. Indian  Foundrymen, April, 1994, 22.
  • S. K. Ghosh, A. Haldar, S. Ganguly and P. P. Chattopadhyay, Development of High Strength Cu – Ni - Ti - B Multiphase Steel by Direct Air – Cooling, submitted revision to Metallurgical and Materials Transactions A.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Effect of pre - strain on the ageing behavior of directly quenched copper containing microalloyed steel, Materials characterization, 2008, in press.
  • S. K. Ghosh, S. Ganguly, P. P. Chattopadhyay and S. Datta, Effect of Copper and Microalloying (Ti, B) Addition on Tensile Properties of HSLA Steels Predicted by ANN Technique, Iron Making and Steel Making, 2008, in press
  • S. K. Ghosh, P. P. Chattopadhyay, A. Haldar, S. Ganguly and S. Datta, Design of the Directly Air – Cooled Pearlite - Free Multiphase Steel from CCT Diagrams Developed Using ANN and Dilatometric Methods, submitted revision to ISIJ International.
  • S. Dey, S. Datta, P.P. Chattopadhyay and J. Sil, Modeling the Properties of TRIP Steel using AFIS: a Distributed Approach – Accepted for publication in Computational Materials Science.
  • S. Ganguly S. Datta, P.P. Chaottopadhyay and N. Chakraborti, Designing the multiphase microstructure of steel for optimal TRIP Effect: a multi-objective genetic algorithm based approach – Accepted for publication in Materials and Manufacturing Processes.
  • K. P. Das, S. Ganguly, P. P Chattopadhyay, S. Tarafder and N. R. Bandyopadhyay, Exploring the Possibilities of Development of Directly Quenched TRIP–aided Steel by ANN Technique – Accepted for publication in Materials and Manufacturing Processes.
  • D. Das, A. Samanta and P. P. Chattopadhyay, Development of Bulk nano-Al2O3 Dispersed Cu-Matrix Composite Using Ball Milled Precursor, in: International Conference on Advanced Materials  and Material Processing IIT Kharagpur 3-5 February 2006    pp 133-140.
  • S. K. Ghosh, A. Halder and P. P. Chattopadhyay, Effect of Cu Addition in Multiphase Ti, B Microalloyed Steel, in: International Conference on Advanced Materials and Material Processing IIT Kharagpur 3-5 February 2006 pp 551-560.
  • S. K. Ghosh, P. Pal, P. P. Chattopadhyay  and S. Dutta, ANN Model for Assessment of Ms Temperature in Copper Added Ti, B Microalloyed Steel, in: International Conference on Advanced Materials  and Material Processing IIT Kharagpur 3-5 February 2006 pp 561-566.
  • M. Kundu, S. Dutta and P. P. Chattopadhyay, Development of High Strength Bainitic Steel, in: International Conference on Advanced Materials  and Material Processing IIT Kharagpur 3-5 February 2006 pp 567-574.
  • S. K. Ghosh, S. Ganguly, S. Datta and P.P. Chattopadhyay, Design of pearlite free air-cooled Cu added Ti, B microalloyed steel from ANN prediction of CCT diagrams – Proc. Int. Workshop NN & GA in Mat. Sc. & Eng. (NGMS-2006), Howrah, India, 11-13 January, 2006, Eds. N.R. Bandyopadhyay et al, pp. 397-411.
  • K. P. Das, S. Tarafder, P. P. Chattopadhyay and N. R. Bandopadhyay, An Approach Towards Development of As-Rolled High Formable Steel, The Third International Conference on Advanced Structural Steels, Gyeongju, Korea, August 22-24, 2006, 861.
  • A. Samanta, P. P. Chattopadhyay, W. Lojkowski2 H. –J. Fecht and I. Manna, Microstructural Evolution During Mechanical Alloying and Hot Pressing of Aluminium and 316 Stainless Steel Powder Blend, in E-MRS FALL MEETING 2005 – SYMPOSIUM I, Warsaw, Poland.
  • K. P. Das, P. P. Chattopadhyay, S. Datta, S. Tarafder, N.R. Bandyopadhyay, Study on the mechanical behaviour of low carbon TRIP steel – Proceedings of Fifth International Conference on HSLA Steels in Iron and Steel, Supplement vol. 40, November 8-10, 2005, Sanya, China, pp. 328-332.
  • Debdulal Das, Asis Samanta and Partha Protim Chattopadhyay, Mechanical properties of Bulk Ultrafine-Grained Copper, Published in the International Conference on Nanomaterials, NANO – 2005, Tamilnadu, p 403.
  • Samanta, P. P. Chattopadhyay, and I. Manna, Amorphisation of Al-Ni-Ti Ternary Blend by Mechanical Alloying, in: NANO-2005, Tamilnadu, pp 397-404
  • A. Samanta, P. P. Chattopadhyay, H. –J. Fecht and I. Manna Microstructural Evolution During Mechanical Alloying of Aluminium and 316 Stainless Steel Powder Blend, in: NANO-2004, Kolkata, pp 547-551.
  • D. Das, A. Samanta and P. P. Chattopadhyay, Deformation Behaviour of Bulk Ultrafined Grained Copper Prepared by Sub-zero Rolling and Controlled Recrystallization, Published in the International Conference on Nano - Materials: Synthesis, Characterization and Applications, NANO – 2004, Kolkata, p 542.
  • D. Das, P. P. Chattopadhyay, Effect of Martensite Morphology and Volume fraction on the Mechanical Behavior of High Martensitic Dual Phase Steel, Proc. of Int. Conf. On Advances in materials & processes for industrial application, 2003, ASM international (Pune chapter), India, Tech. Vol., 2003, 50-58.
  • S. K. Ghosh, P. P. Chattopadhyay,  Microstructural evolution in Cu- added Ti, B microalloyed dual phase steel, Proc. of Int. Conf. On Advances in materials & processes for industrial application, 2003, , ASM international (Pune chapter), India, Tech. Vol., 2003, p. 35.
  • D. Ghosh, P. P. Chattopadhyay, A Model for Reconstruction of Indian Foundry Industry Under the Context of Globalization, Proc. of Indian Foundry Congress, Jaipur, 2003, p.26.
  • D. Das, P. P. Chattopadhyay and N. R. bandyopadhyay, A study on the effect of martensite morphology on mechanical properties of high martensitic dual phase steel, Proc. of seminar on Resurgence of Metallic Materials, Jamshedpur, 2003, p.68
  • K. Bhuniya, S. Dutta. P. P. Chattopadhyay and M. K. Banerjee, Effect of trace addition on the microstructural degradation of Cu-Zn-Al shape memory alloy, Proc. of seminar on Resurgence of Metallic Materials, Jamshedpur, 2003, p. 85.
  • S. K. Ghosh, P. P. Chattopadhyay, Effct of minor Cu-addition on microstructural evolution in Cu- added Ti, B microalloyed dual phase steel, Proc. of Asia Steel Int. Conf. 2003, Tata Steel, Jamshedpur, India, Vol. 3, 2002, 3.c.4.1-8.
  • I. Manna, P. Nandi, P. P. Chattopadhyay, S. K. Pabi, F. Banhart and H. –J. Fecht, Synthesis of Amorphous and Nano-aluminide Dispersed Al-based Composites by Mechanical Alloying, in: Advances in Materials and Materials Processing (ICAMMP-2002) – Conference Proceedings (Eds.: N. Chakraborti and U. K. Chatterjee), Tata McGraw Hill Publishing Company Ltd., New Delhi (2002) pp. 410 – 414.
  • P. P. Chattopadhyay, S. K. Pabi and I. Manna, Some Aspects of Nanocrystalline Materials Prepared by Ball Milling, Published in the Conference Proceedings of the International Conference on "Trends in Mechanical Alloying: Science, Technology and Application", held in Jaipur, India during February 21-23, 2001, pp. 96 – 105.
  • S. Datta, P. P. Chattopadhyay and M. K.  Banerjee, Development of Mechanically Alloyd AlMgSi-SiCp Mnetal Matrix Composite with Trace Scandium Addition, Conf. Proc. of the Intl. Conf. On: "Trends in Mechanical Alloying: Science, Technology and Application", Jaipur, India, 2001, 173.


    Courses Undertaken



    Department of Metallurgy And Materials Engineering , BESU, Shibpur - 7111 03, INDIA