IIEST, Shibpur

Indian Institute of Engineering Science and Technology, Shibpur

(Formerly Bengal Engineering and Science University, Shibpur)

Empowering the nation since 1856

 pre-bid meeting in presence of the bidders held on May 11, 2017 at MNDSMSE

Office of the Dean Research and Development 
Indian Institute of Engineering Science & Technology (IIEST), Shibpur
Howrah-711 103

Project Code: DRC/SERB/SMSE/PS/023/16-17

Dr. M. N. Dastur School of Materials Science and Engineering
Indian Institute of Engineering Science and Technology,
Shibpur, Howrah-711 103

Ref.: Tender Advt. No. SMS 1250, published in the “Statesman (All Edition)”, dated 08.05.2017

Resolutions taken at the pre-bid meeting in presence of the bidders held on May 11, 2017 at MNDSMSE, IIEST-Shibpur

Introduction of few key points regarding technical specifications:
1. Build volume in between (90x80x90) mm to (130x90x100)mm
2. SD card will be an optional requirement
3. Precision in Z axis will be of min. 2.5 to 5.0 micron
4. Starting materials kit must be specified in term of minimum volume
5. Flexibility regarding materials to be used should include liquid and paste
6. There should be flexibility of UV range
7. Temperature of extrusion as optional accessories can be included (range should be given)
8. Materials should be of open source.


Dean (R & D)

(A. Code DRC-T018/17-18)

 Detail Information