Pre-loader
Faculty/Staff Admission Employment Student Tenders General Finance CMS Placement
  • B. Tech.
  • B. Arch.
  • B. Tech. - M. Tech.
  • M. Tech.
  • M. Sc.
  • M B A
  • M.O.P
  • Ph. D.
    • Admission Notices

    Sukumar Kundu

    About


    Dr. Sukumar Kundu graduated in Metallurgical Engineering from B. E. College (Deemed University), received a Master of Engineering (Physical Metallurgy) degree from B. E. College (Deemed University) and obtained Ph. D. (Engineering) from BESU, Shibpur, India. He was awarded “An Indo-US Research Fellowship” for carrying a Post-Doctoral at Colorado School of Mines, USA, from October 2012 to October 2013. He is an Associate Professor in the Department of Metallurgy and Materials Engineering, Indian Institute of Engineering Science and Technology, Shibpur. Before joining IIEST Shibpur, he worked as a Scientist in the Material Science and Technology division of the National Metallurgical Laboratory, Jamshedpur, Jharkhand. His research interest includes structure-property correlations in ferrous and non-ferrous alloys, joining of similar/dissimilar materials, degradation of materials and biomaterials. He has published over ninety research articles in national and international journals and conference proceedings. He was awarded the Young Metallurgist Award in 2009 from the Ministry of Steel, Govt. of India.

    Academic Qualifications


    B. E. (2000), M. E. (2002), Ph. D. (2008), 

    Research Statement


    Advanced Joining Technique, 

    Degradation of materials, 

    High-strength steels,

    Mg-based biodegradable material 

    Latest Publications


  • 1 Avinash Kumar, Gopinath Thirunavukarasu, Sukumar Kundu, Electrochemical behavior and microstructure of diffusion welding of zirconium alloy and super duplex stainless steel, 41, 110735, Materials Today Communications, 2024
  • 2 Avinash Kumar, Arindam Dhar, Ishita Koley, Sukumar Kundu, Interfacial microstructure and electrochemical behavior of diffusion welded joints of Zr-Alloy and super duplex stainless steel, 68, 2521-2535, Welding in the World, 2024
  • 3 Avinash Kumar, Arindam Dhar, Gopinath Thirunavukarasu, Sukumar Kundu, Effect of processing temperature on interface microstructure of diffusion welded joint of super-duplex stainless steel and zirconium alloy with nickel alloy interlayer, 322, 129312, Materials Chemistry and Physics, 2024
  • 4 Binod Barai, Abhigyan Ojha, Subhasish Sarkar, Sukumar Kundu, Buddhadeb Oraon, Tapendu Mandal, Enhancing Corrosion Resistance of Biodegradable Magnesium Alloys through Hydrophobic Surface Modification: Experimental Analysis and ANN Modeling, Surface Review and Letters, 2024
  • 5 Sangeeta Ghosh, Paramita Hajra, Sukumar Kundu, Swarnendu Baduri, Debasish Ray, Chinmoy Bhattacharya, Associative Role of g-C3N4 to BiVO4 via Favorable Crystallinity and Rapid Charge-Carrier Transport for an Improved Photoelectrochemical Water Oxidation Process: An In Situ Composite Explored through Different Carbon Nitride Precursors, 1, 2892-2902, ACS Applied Engineering Materials, 2023
  • 6 Bhaskarjyoti Das, Muralidhar Yadav, Sukumar Kundu, Tapendu Mandal, Evaluation of corrosion behaviour of turmeric-coated AZ51 alloy in simulated body fluid for biomedical applications, 58, 124-137, Corrosion Engineering, Science and Technology, 2023
  • 7 S. Ghosh, A. Poddar, H. S. Sahoo, S. Baduri, D. Ray, S. Kundu, J. K. Singh, C. Bhattacharya, Recent Progress on Carbon-Modified Bismuth-Based Oxides for Applications in Photo-Assisted Devices, 55-85, IGI Global, 2023
  • 8 Ishita Koley, Arindam Dhar, Avinash Kumar, Nanigopal Roy, Sukumar Kundu, Effect of rotational speed on microstructure, mechanical property, and electrochemical behavior of friction stir welded joint of ultra-low carbon steel, 67, 2283–2299, Welding in the World, 2023
  • 9 Tapendu Mandal, Shalini Dasgupta, Ananya Barui, Sukumar Kundu, Microstructure, Corrosion, and Biological Responses of Mg-Al-Zn-Sr-xCa Alloys for Bioresorbable Applications, 75, 2299-2313, Journal of Materials, 2023
  • 10 Bhaskarjyoti Das, Muralidhar Yadav, Sukumar Kundu, Tapendu Mandal, Evaluation of corrosion behaviour of turmeric-coated AZ51 alloy in simulated body fluid for biomedical applications, 58, 124-137, Corrosion Engineering, Science and Technology, 2023
    • View More

    Research Areas


    • Solid-state welding of similar and dissimilar materials
    • Mg based biodegradable material
    • High strength steels

    Publications


  • 1 Avinash Kumar, Gopinath Thirunavukarasu, Sukumar Kundu, Electrochemical behavior and microstructure of diffusion welding of zirconium alloy and super duplex stainless steel, 41, 110735, Materials Today Communications, 2024
  • 2 Avinash Kumar, Arindam Dhar, Ishita Koley, Sukumar Kundu, Interfacial microstructure and electrochemical behavior of diffusion welded joints of Zr-Alloy and super duplex stainless steel, 68, 2521-2535, Welding in the World, 2024
  • 3 Avinash Kumar, Arindam Dhar, Gopinath Thirunavukarasu, Sukumar Kundu, Effect of processing temperature on interface microstructure of diffusion welded joint of super-duplex stainless steel and zirconium alloy with nickel alloy interlayer, 322, 129312, Materials Chemistry and Physics, 2024
  • 4 Binod Barai, Abhigyan Ojha, Subhasish Sarkar, Sukumar Kundu, Buddhadeb Oraon, Tapendu Mandal, Enhancing Corrosion Resistance of Biodegradable Magnesium Alloys through Hydrophobic Surface Modification: Experimental Analysis and ANN Modeling, Surface Review and Letters, 2024
  • 5 Sangeeta Ghosh, Paramita Hajra, Sukumar Kundu, Swarnendu Baduri, Debasish Ray, Chinmoy Bhattacharya, Associative Role of g-C3N4 to BiVO4 via Favorable Crystallinity and Rapid Charge-Carrier Transport for an Improved Photoelectrochemical Water Oxidation Process: An In Situ Composite Explored through Different Carbon Nitride Precursors, 1, 2892-2902, ACS Applied Engineering Materials, 2023
  • 6 Bhaskarjyoti Das, Muralidhar Yadav, Sukumar Kundu, Tapendu Mandal, Evaluation of corrosion behaviour of turmeric-coated AZ51 alloy in simulated body fluid for biomedical applications, 58, 124-137, Corrosion Engineering, Science and Technology, 2023
    • 7 S. Ghosh, A. Poddar, H. S. Sahoo, S. Baduri, D. Ray, S. Kundu, J. K. Singh, C. Bhattacharya, Recent Progress on Carbon-Modified Bismuth-Based Oxides for Applications in Photo-Assisted Devices, 55-85, IGI Global, 2023
  • 8 Ishita Koley, Arindam Dhar, Avinash Kumar, Nanigopal Roy, Sukumar Kundu, Effect of rotational speed on microstructure, mechanical property, and electrochemical behavior of friction stir welded joint of ultra-low carbon steel, 67, 2283–2299, Welding in the World, 2023
  • 9 Tapendu Mandal, Shalini Dasgupta, Ananya Barui, Sukumar Kundu, Microstructure, Corrosion, and Biological Responses of Mg-Al-Zn-Sr-xCa Alloys for Bioresorbable Applications, 75, 2299-2313, Journal of Materials, 2023
  • 10 Bhaskarjyoti Das, Muralidhar Yadav, Sukumar Kundu, Tapendu Mandal, Evaluation of corrosion behaviour of turmeric-coated AZ51 alloy in simulated body fluid for biomedical applications, 58, 124-137, Corrosion Engineering, Science and Technology, 2023
  • 11 Debasis Sariket, Arjun Maity, Sukumar Kundu, Chinmoy Bhattacharya, In situ chemical synthesis of g-C3N4/In2O3 semiconductor composites for photoelectrochemical water oxidation, 315, 123484, Journal of Solid State Chemistry, 2022
  • 12 Ishita Koley, Sukumar Kundu, Electrochemical behavior of friction stir welded joint of ultra-low carbon steel, 1248, 012040, IOP Conf. Series: Materials Science and Engineering, 2022
  • 13 Tapendu Mandal, Shalini Dasgupta, Ananya Barui and Sukumar Kundu, Effect of strontium on microstructure, mechanical, and biological responses of Mg–Al–Zn–Sr alloys, Materials Science and Technology (United Kingdom), 2022
  • 14 Sukumar Kundu, Gopinath Thirunavukarasu, Diffusion Welding of Ti6Al4V and 17-4 Stainless Steel Using Cu/Ni Microlayers, Journal of Materials Engineering and Performance, 2022
    • 15 J. Kundu, A. Chakraborty and S. Kundu, Bonding pressure effects on characteristics of microstructure, mechanical properties, and mass diffusivity of Ti-6Al-4V and TiAlNb diffusion-bonded joints, 1-15, Welding in the World, 2020
  • 16 Gopinath Thirunavukarasu, Sukumar Kundu, Vivek V Patel, Alankar Alankar, Analytical investigation on the evolution and growth of ?-Ti and Fe-Nb-based intermetallics in diffusion coupled joints of Ti6Al4V|Nb|SS, 27, 3-24, Diffusion Foundations, 2020
  • 17 G Thirunavukarasu, S Kundu, High-Strength Diffusion-Bonded Joints of 17-4 Stainless Steel and T64 Alloy Using Nickel and Copper Bilayer, 29, 515-528, Journal of Materials Engineering and Performance, 2020
  • 18 Paramita Hajra, Sukumar Kundu, Arjun Maity, Chinmoy Bhattacharya, Facile photoelectrochemical water oxidation on Co2+-adsorbed BiVO4 thin films synthesized from aqueous solutions, 374, 1221-1230, Chemical Engineering Journal, 2019
    • 19 Gopinath Thirunavukarasu, Vivek V Patel, Sukumar Kundu, Alankar Alankar, Diffusion Bonding of Ti6Al4V and SS 304 with Nb Interlayer, Materials Performance and Characterization, 2019
  • 20 Paramita Hajra, Sanjib Shyamal, Harahari Mandal, Debasis Sariket, Arjun Maity, Sukumar Kundu, Chinmoy Bhattacharya, Synthesis of oxygen deficient bismuth oxide photocatalyst for improved photoelectrochemical applications, 299, 357-365, Electrochimica Acta, 2019
  • 21 B Murugan, G Thirunavukarasu, S Kundu, SV Kailas, Influence of tool traverse speed on structure, mechanical properties, fracture behavior, and weld corrosion of friction stir welded joints of aluminum and stainless steel, 21, 1800869, Advanced Engineering Materials, 2019
  • 22 I Koley, S Kundu, SV Kailas, Friction stir welding of ultra low carbon steel: microstructure, mechanical properties and electrochemical study, 116, 118-126, Metallurgical Research & Technology, 2019
  • 23 Bera, P. Hajra, S. Shyamal, H. Mandal, D. Sariket, S. Kundu, S. Mandal, C. Bhattacharya, Solvent Effects on the Photoelectrochemical Water Oxidation Behaviour of TiO2 Semiconductors, 5, 10161-10168, Materials Today: Proceedings, 2018
  • 24 Gopinath T., S. Kundu, B. Murugan, I. Koley, S. Anandhakrishnan, S. Chatterjee, A. Sarkar, L. Biswa, Interfacial Diffusion Kinetics in Indirect Diffusion Couple of Titanium Alloy and Stainless Steel using Niobium Interlayer, 1, 1-18, Materials Physics and Chemistry, 2018
  • 25 Gopinath T., S. Kundu, T. Laha, D. Roy, S. Chatterjee, Exhibition of veiled features in diffusion bonding of titanium alloy and stainless steel via copper, 115, 115-122, Metallurgical Research & Technology, 2018
  • 26 B. Murugan, Gopinath T., S. Kundu, S. V Kailas, S Chatterjee, Interfacial Microstructure and Mechanical Properties of Friction Stir Welded Joints of Commercially Pure Aluminum and 304 Stainless Steel, 27, 2921–2931, Journal of Materials Engineering and Performance, 2018
  • 27 S. Kundu, A. Chakraborty, B. Mishra, Interfacial reaction and microstructure study of DSS/Cu/Ti64 diffusion-welded couple, 62, 155-167, Welding in the World, 2018, 2018
  • 28 Gopinath T., B. Murugan, S. Chatterjee, S. Kundu, Influence of welding pressure on diffusion welded joints using interlayer: considering diffusion welding for superior performances, 96, 53-62, WELDING JOURNAL, 2017
  • 29 D. Sariket, S. Shyamal, P. Hajra, H. Mandal, A. Bera, A. Maity, S. Kundu, C. Bhattacharya, Temperature controlled fabrication of chemically synthesized cubic In2O3 crystallites for improved photoelectrochemical water oxidation, 201, 7-17, Materials Chemistry and Physics, 2017
  • 30 Gopinath T., S. Chatterjee, S. Kundu, Scope for improved properties of dissimilar joints of ferrous and non-ferrous metals, 27, 1517-1529, Transactions of Nonferrous Metals Society of China, 2017
  • 31 B. Murugan, S Kundu, S Chatterjee, An Analysis of Microstructure and Mechanical Properties on Friction Stir Welded Joint of Dissimilar 304 Stainless Steel and Commercially Pure Aluminium, 62, 1813-1817, Archives of Metallurgy and Materials, 2017
  • 32 V.C. Sinha, S Kundu, S Chatterjee, Microstructure and Mechanical Properties of Friction Stir Welded Joints Between Commercially Pure Copper and Al 6351 Alloy, 62, 1819-1825, Archives of Metallurgy and Materials, 2017
  • 33 Gopinath T., S. Kundu, S. Chatterjee, Metallurgists’ Insights on Diffusion-Assisted Dissimilar-Joints of Light-and Heavy-Alloys, 380, 12-28, Defect and Diffusion Forum, 2017
  • 34 S Shyamal, P Hajra, H Mandal, A Bera, D Sariket, AK Satpati, S Kundu and C. Bhattacharya, Benign role of Bi on an electrodeposited Cu2O semiconductor towards photo-assisted H 2 generation from water, 4 (23), 9244-9252, Journal of Materials Chemistry A, 2016
  • 35 H. Mandal, S. Shyamal, P. Hajra, A. Bera, D. Sariket, S. Kundu, C. Bhattacharya, Development of ternary iron vanadium oxide semiconductors for applications in photoelectrochemical water oxidation, 6, 4992-4999, RSC Adv., 2016, 2016
  • 36 Gopinath T, S. Kundu, S. Chatterjee, The latent fingerprint in mass transport of polycrystalline materials, 52 (2), 217-225, Heat Mass Transfer, 2016
  • 37 S. Kundu and Gopinath T, Structure and properties correlation of diffusion bonded joint of duplex stainless steel and Ti–6Al–4V with and without Ni–17Cr–9Fe alloy interlayer, 60, 793–811, Welding World, 2016
  • 38 V.C.Sinha, S.Kundu, S.Chatterjee, Microstructure and mechanical properties of similar and dissimilar joints of aluminium alloy and pure copper by friction stir welding, 8, 543-546, Perspectives in Science, 2016
  • 39 S. Kundu, G Thirunavukarasu, S. Chatterjee and B. Mishra, Effect of Bonding Temperature on Phase Transformation of Diffusion-Bonded Joints of Duplex Stainless Steel and Ti-6Al-4V Using Nickel and Copper as Composite Intermediate Metals, 46, 5756-5771, Metallurgical and Materials Transactions A, 2015
  • 40 R Bhola, S Kundu, FM Alabbas, B Mishra, G Singh, AZ91D A Suitable Candidate For Reconstruction Maxillofacial Implants, 5, 36-42, A Materials Perspective, Journal of Oral Implants, 2015
  • 41 Rahul Bhola, Sukumar Kundu, Faisal M Alabbas, Charu Chandra, Brajendra Mishra, David L Olson, Corrosion Response of Ti6Al4V and Ti15Mo Dental Implant Alloys in the presence of Listerine Oral Rinse, 2013, 1-7, International Journal of Corrosion, 2014
  • 42 S. Kundu, S. M. Bhola, B. Mishra and S. Chatterjee, Structure and properties of solid state diffusion bonding of 17-4PH stainless steel and titanium, 30 (2), 248-256, Materials Science and Technology, 2014
  • 43 G Thirunavukarasu, S Kundu, B Mishra, S Chatterjee, Effect of Bonding Temperature on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4V and 304 Stainless Steel Using Nickel as an Intermediate, 45 (4), 2067-2077, Material, Metallurgical and Materials Transactions A, 2014
  • 44 Gopinath T, S. Kundu, B. Mishra, S. Chatterjee, Effect of Bonding Time on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4V and 304 Stainless Steel Using Nickel as an Intermediate Material, 45, 2078-2090, Metallurgical and Materials Transactions A, 2014
  • 45 S.M. Bhola, S Kundu, R. Bhola, B Mishra, S. Chatterjee, Electrochemical Study of Diffusion Bonded Joints between Micro-duplex Stainless Steel and Ti6Al4V Alloy, 30 (2), 163-171, Journal of Materials Science & Technology, 2014
  • 46 S. Kundu, S. Sam, B. Mishra and S. Chatterjee, Diffusion Bonding of Microduplex stainless steel and Ti alloy with and without interlayer: Interface microstructure and strength properties, 45 (1), 371-383, Metallurgical and Materials Transactions A 2014, 2014
  • 47 S. Chatterjee, S. Kundu, S. Sam, B Mishra, Diffusion Bonding of Duplex Stainless Steel and Ti Alloy with and without Interlayer, 783(7), 9-14, Materials Science Forum, 2014
  • 48 P. S Bandyopadhyay, S.K. Ghosh, S. Kundu, S. Chatterjee, Phase transformation and mechanical behavior of thermomechanically controlled processed high strength ordnance steel, 138, 86-94, Materials Chemistry and Physics, 2013
  • 49 SM Bhola, S Kundu, F Alabbas, B Mishra, DL Olson, An electrochemical study on chlorhexidine gluconate addition to normal saline for oral implant applications, 8, 5172-5182, Int. J. Electrochem. Sci, 2013
  • 50 S. Kundu, S. Sam and S. Chatterjee, Effect of microstructure and reaction products on the strength properties of micro-duplex stainless steel | Ni alloy interlayer | Ti6Al4V diffusion bonded joints, 560, 288-295, Materials Science and Engineering A, 2013
  • 51 S. Kundu, G Anand and S Chatterjee, Diffusion Bonding of 17-4 Precipitation Hardening Stainless Steel to Ti Alloy With and Without Ni Alloy Interlayer, 44, 2196-2211, Interface Microstructure and Mechanical Properties' Metallurgical and Materials Transactions A, 2013
  • 52 S. Kundu, R. Bhola, D Roy, D Bhattacharjee, B Mishra, S Chatterjee, Microstructure and tensile strength of friction stir welded joints between interstitial free steel and commercially pure Aluminium, 50, 370-375, Materials & Design, 2013
  • 53 S. Kundu, B Mishra, D Olson, S Chatterjee, Interfacial reactions and strength properties of diffusion bonded joints of Ti64 alloy and 17-4PH stainless steel using nickel alloy interlayer, 5, 714–722, Materials & Design, 2013
  • 54 R Bhola, S Kundu, FM Alabbas, C Chandra, B Mishra, DL Olson, Corrosion Response of Ti6Al4V and Ti15Mo Dental Implant Alloys in the presence of Listerine Oral Rinse, 1-7, International Journal of Corrosion, 2013
  • 55 R. Shukla, S. K. Das, B. Ravi Kumar, S. K. Ghosh, S. Kundu and S. Chatterjee, An Ultra-low Carbon, Thermomechanically Controlled Processed Microalloyed Steel: Microstructure and Mechanical Properties, 43, 4835-4845, Materials Science and Engineering A, 2012
  • 56 S. Sam, S. Kundu and S. Chatterjee, Diffusion bonding of titanium alloy to microduplex stainless steel using a nickel alloy interlayer, 40, 237-244., Material and Design, 2012
  • 57 S. Kundu, D. Roy, S. Chatterjee, D. Olson, B. Mishra:, Influence of interface microstructure on the mechanical properties 4 of titanium/17-4 PH stainless steel solid state diffusion bonded joints, 37, 560-568, Materials and Design, 2012
  • 58 S. Kundu, S. Sam, S. Chatterjee,, Evaluation of interface microstructure and mechanical properties of the diffusion bonded joints of Ti-6Al-4 V alloy to micro-duplex stainless steel, 528, 4910-16, Materials Science and Engineering: A, 2011
  • 59 S. Kundu, S. Sam, S. Chatterjee, Interface microstructure and strength properties of Ti–6Al–4V and microduplex stainless steel diffusion bonded joints, 32, 2997-3003, Materials & Design, 2011
  • 60 S.K. Ghosh, P.S. Bandyopadhyay, S. Kundu and S. Chatterjee:, Copper bearing microalloyed ultrahigh strength steel on a pilot scale: Microstructure and properties, 528, 7887– 7894, Materials Science and Engineering A, 2011
  • 61 P. S. Bandyopadhyay, S. Kundu, S. K. Ghosh and S. Chatterjee, Structure and properties of a low-carbon, microalloyed, ultra-high-strength steel, 42, 1051-1061, Metallurgical and Materials Transactions A, 2011
  • 62 P. S. Bandyopadhyay, S. K. Ghosh, S. Kundu and S. Chatterjee, Evolution of microstructure and mechanical properties of thermomechanically processed ultrahigh strength steel, 42, 2742-2752, Metallurgical and Materials Transactions A, 2011
  • 63 S. Kundu and S. Chatterjee, Effects of temperature on interface microstructure and strength properties of titanium–niobium stainless steel diffusion bonded joints, 27, 1177-1182, Materials science and Technology, 2011
  • 64 S. Kundu and S. Chatterjee, Evolution of interface microstructure and mechanical properties of Titanium/304 stainless steel diffusion bonded joint using Nb interlayer, 50, 1460-1465, ISIJ International, 2010
  • 65 S. Kundu and S. Chatterjee, Interface Microstructure and strength properties of diffusion bonded joints of Titanium-Al interlayer -18Cr-8Ni stainless steel, 527, 2714-2719, Materials Science and Engineering A, 2010
  • 66 S. Kundu and S. Chatterjee, Influence of bonding temperature on structure and properties of titanium and micro duplex stainless steel diffusion bonded joints, 49, 1749-1754, ISIJ International, 2009
  • 67 S. Kundu, S. Chatterjee, D. Olson and B. Mishra, Interface Microstructure and Strength Properties of the Diffusion Bonded joints of Titanium ôCu InterlayerôStainless Steel, 39, 2106-2114, Metallurgical and Materials Transactions A, 2008
  • 68 S. Kundu and S. Chatterjee, Diffusion Bonding between Commercially Pure Titanium and Micro-Duplex Stainless Steel, 480, 316-322, Materials Science and Engineering A, 2008
  • 69 S. Kundu and S. Chatterjee, Characterization of Diffusion Bonded Joint between Titanium and 304 Stainless Steel using a Ni Interlayer, 59, 631-637, Materials Characterizations, 2008
  • 70 S. Kundu and S. Chatterjee, Effect of Reaction Products on Mechanical Properties of Diffusion Bonded of Titanium to 304 stainless steel with Cu interlayer Joints, 61, 457-464, Transactions of The Indian Institute of Metals, 2008
  • 71 S. Kundu and S. Chatterjee, Mechanical Properties of Diffusion Bonded Joints between Titanium and Stainless Steel with a Nickel Interlayer, 23, 1167-1172, Materials science and Technology, 2007
  • 72 S. Kundu and S. Chatterjee, Structure and Properties of Diffusion Bonded Transition Joints between Commercially Pure Titanium and 304 Stainless Steel Using Nickel Interlayer, 42, 7906-7912, Journal of Materials Science, 2007
  • 73 S. Kundu and S. Chatterjee, Microstructure and Mechanical Properties of Diffusion Bonded Joints between Titanium and Stainless Steel with Copper Interlayer, 12, 572-578, Science and Technology of Welding and Joining, 2007
  • 74 S. Kundu and S. Chatterjee, Effect of Temperature on the Formation of Reaction Products and Strength Properties of Titanium and Stainless Steel joints Using Copper Interlayer, 23, 368-373, Materials science and Technology, 2007
  • 75 A. Ghosh, S. Kundu and S. Chatterjee, Structure and Properties of Thermo-mechanically Processed HSLA Steels for Naval Applications, 57, 481-490, Defence Science Journal, 2007
  • 76 S. Kundu, S. Chatterjee, D. Olson and B. Mishra, Effects of Intermetallic Phases on the Bond Strength of Diffusion Bonded Joints between Titanium and 304 Stainless Steel using Nickel Interlayer, 38, 2053-2060, Metallurgical and Materials Transactions A, 2007
  • 77 S. Kundu and S. Chatterjee, Interfacial Microstructure and Mechanical Properties of the Diffusion Bonded Joints of Titanium to Stainless Steel with Nickel Interlayer, 425, 107-113, Materials Science and Engineering A, 2006
  • 78 S. Kundu and S. Chatterjee, Effect of Bonding Temperature on Interface Microstructure and Properties of Titanium – 304 Stainless steel Diffusion Bonded Joints with Ni Interlayer, 22, 1201-1207, Materials science and Technology, 2006
  • 79 S. Kundu, M. Ghosh and S. Chatterjee, Diffusion Bonding of Commercially Pure Titanium and 17-4 Precipitation Hardening Stainless Steel, 428, 18-23., Materials Science and Engineering A, 2006
  • 80 S. Das, S. Kundu, A. Ghosh and S. Chatterjee, Structure and Properties of HSLA-100 Steel for Automotive Application, 87, 1-Jun, Journal of Institution of Engineers, 2006
  • 81 S. Kundu and S. Chatterjee, Effect of Bonding Time on Structure and Properties of Transition Joints between Commercially Pure Titanium and 304 Stainless Steel with Nickel Interlayer, 59, 481-489, Transaction of The Indian Institute of Metals, 2006
  • 82 S. Kundu, M. Ghosh, A. Laik K. Bhanumurthy, G. B. Kale and S. Chatterjee:, Diffusion bonding between commercially pure titanium and 304 stainless steel using copper interlayer, 407, 154-160, Materials Science and Engineering A, 2005
  • 83 M. Ghosh, S. Kundu, S. Chatterjee and B. Mishra,, Influnce of Interface Microstructure on the Strength of the Transition Joint between Ti-6Al-4V and Stainless Steel, 36, 1891-1899, Metallurgical and Materials Transactions A, 2005
  • 84 S. Das, A. Ghosh, S. Kundu and S. Chatterjee, A Study on Structure and Properties of a Hot Forged HSLA-80 Steel, 57, 25-33, Transaction of Indian Institute of Metals, 2004
  • 85 S. Kundu, M. Ghosh and S. Chatterjee, Reactive Diffusion Bonding between Commercially Pure Titanium and 304 Stainless Steel Using Nickel Interlayer, 44, 1891-1896, ISIJ International, 2004
  • 1 M Balamagendiravarma, S Kundu, S Chatterjee, An Analysis of Microstructure and Mechanical Properties on Friction Stir Welded Joint of Dissimilar 304 Stainless Steel and Commercially Pure Aluminium, International Conference on Sustainable Materials, Design and Applications, 2016, Kongu Engineering college, perundurai, Tamil nadu, 2016
  • 2 V.C. Sinha, S Kundu, S Chatterjee, Roy, S. Microstructure and Mechanical Properties of Friction Stir Welded Joints Between Commercially Pure Copper and Al 6351 Alloy, International Conference on Sustainable Materials, Design and Applications, 2016, Kongu Engineering college, perundurai, Tamil nadu, 2016
  • 3 S. Kundu, Gopinath T. and S. Chatterjee, Formation of Intermetallic Phases and their effect on Strength properties of Diffusion Bonded joints of Stainless Steel and Titanium Using Copper Interlayer, International Symposium on Joining of Materials (SOJOM 2012), 2012
  • 4 V. C. Sinha, S. Kundu and S. Chatterjee, Friction stir welded joints between copper and aluminium alloy: structure and properties, International Symposium on Joining of Materials (SOJOM 2012), 2012
  • 5 D. Roy, S. Kundu, D. Bhattacharjee and S Chatterjee, Friction stir welding of interstitial free steel and 6082 Al alloy: Interface microstructure and strength properties, International conference ICAMP 2011, IIT, Kharagpur, 2011
  • 6 V. Shina, S. Kundu, D. Roy , and S. Chatterjee, Microstructure and Mechanical Properties of friction stir welded joints of copper and 6351 aluminium alloy, Interface microstructure and strength properties, International conference ICAMP 2011, IIT, Kharagpur, 2011
  • 7 S. Sam, S. Kundu and S. Chatterjee, Diffusion Bonding of Microduplex stainless steel and Ti alloy with Ni alloy interlayer: Interface microstructure and strength properties, International conference ICAMP 2011, IIT, Kharagpur., 2011
  • 8 S. Kundu and S. Chatterjee, Interface Structure and Strength Properties of Titanium-Ni-Stainless Steel Diffusion Bonded Joints, The Third International Conference on structure, processing and properties of Materials, SPPM 2010, 24-26 February 2010, Dhaka, Bangladesh, 2010
  • 9 R. Shukla, S. Kundu, Samar Das and S. Chatterjee, Structure and Properties of an Ultra Low Carbons Ti Micro-alloyed Steel, International conference on Micro-alloying 2007, Kolkata 9-11th March 2007, 2007
  • 10 S. Kundu and S. Chatterjee, Interface Structure and Properties of Titanium-Ni-Stainless Steel diffusion Bonded Joints, NCETEM 2007, Patiala, Punjab 1-3rd Feb 2007, 2007
  • 11 S. Kundu, A. Ghosh, Samar Das and S. Chatterjee, Ageing Behaviour of Boron Bearing HSLA Steel, International conference on Micro-alloying2007, Kolkata 9-11th March 2007, 2007
  • 12 S. Kundu, Development of Diffusion Bonded Joints between Commercially Pure Titanium and 304 Stainless Steel with Nickel Interlayer for Application in Nuclear Industries, India Students Academic MEET 2005, 20-21 January, 2005, 2006
  • 13 S. Kundu and S. Chatterjee, Structure and Properties of Diffusion Bonded Transition Joints between Commercially Pure Titanium and 304 Stainless Steel Using Nickel Interlayer’, International conference (ICAMP 2006) IIT Khargapur 2006, 2006

    • Patents


    # Patents Year
    1 Development of 2000mpa ultra high strength steel, From IISEST and MSF, Patent No. 330973, date of Grant 31.01.2020. 2020
    2 Erosion resistant steel for underwater components of turbine hydrogenerators and process for producing the same, From NML Jamshedpur, 2653/DEL/2011, date 15/03/2013 2014

    Member


    Indian Institute of Welding

    Life Member

    India Institute of Metal

    Life Member

    Responsibilities


    Head, Department of Metallurgy and Materials Engineering
    June 2024 to continue
    Convener of Departmental Under Graduate Committee (DUGC)
    June 2021 continuing
    Professor-in-Charge of Joining Lab., Dept. of Met. and Mats. Engg, IIEST, Shibpur
    August 2021 to till date
    Professor-in-Charge of Corrosion and Advanced Metallography Lab., Dept. of Met. and Mats. Engg, IIEST, Shibpur
    August 2021 to till date
    Member of Stock Verification Committee of the Institute
    2020-21, 2021 -22 and 2022-23
    Professor in-charge of Metallography Laboratory, Dept. of Metallurgy and Materials Engineering, IIEST, Shibpur
    January 2015 to August 2021
    Warden SEN HALL
    July 2017 to till date

    Projects


    • Research services for barrels, Consultancy
      Completed
    • Comparative Techno-Commercial feasibility study of Seamless Stainless Steel, Mild steel, and Electroplated Seamless Mild Steel tubes for airbrake application in Indian railways, Consultancy
      Completed
    • Development of 2000 MPa Steel on Industrial Scale, Sponsored
      Completed
    • Friction stir welding of Cp Ti and 304 stainless steel, Sponsored
      Completed
    • Development and evaluation of wear resistant material, Sponsored
      Completed
    • Development of diffusion bonded joints between Titanium alloy and micro-duplex stainless steel with intermediate materials., Sponsored
      Completed

    Awards


    • M.Tech thesis of Mr. Gopinath T (working under my supervision) received the Best thesis award from Indian National Academy of Engineering, Year: 2011, Year: 2011
    • SAIL Gold Medal from Indian Institute of Metal for best paper publication in IIM Transactions, Year: 2009
    • Young Faculty Research Award from Alumni Association BESU at Washington, USA, Year: 2009
    • Young Metallurgist Award from Ministry of Steel, Govt. of India, Year: 2009
    • Indo-US Research Fellowship for post doctorate at Colorado school of mines, USA, Year: 2012
    • Fast Track for Young Scientist project, Science and Engineering Research Board, Department of Science and Technology, Government of India, Year: 2012

    Research Groups


    Balamagendiravarman M. (Awarded on 15 July, 2021)
    Ph. D.
    balamvarman@gmail.com

    Research:
    Friction stir welding of 304 stainless steel and CP aluminum

    Ishita koley (Awarded on November 19, 2024)
    Ph. D.
    koley3@gmail.com

    Research:
    Friction Stir Welding of Ultra Low Carbon Steel: Microstructure, Mechanical Properties and Electrochemical Study

    Avinash Kumar (pursuing)
    Ph. D.
    avinashgaya41@gmail.com

    Research:
    Diffusion welding of Zr alloy and super-duplex stainless steel with and without Ni alloy interlayer

    Samudra Sam (Awarded on May, 2015)
    Ph. D.
    samudra_engr@yahoo.co.in

    Research:
    Dissimilar diffusion welding of Duplex stainless steel -Ti64 Alloy

    Gopinath T. (Awarded on January 12, 2018)
    Ph. D.
    gopinath23t@gmail.com

    Research:
    Diffusion welding of 304SS and Ti alloy with Ni, Cu and Nb composite interlayer

    Vibhash Sinha (Awarded on October 5, 2018)
    Ph. D.
    vibhashsinha@gmail.com

    Research:
    Friction stir welding of similar and dissimilar Copper and aluminum alloy   

    Arindam Dhar (Pursuing)
    Ph. D.
    arindam.mech11@gmail.com

    Research:
    Wire arc additive manufacturing of High entropy alloys

    Tapendu Mandal (Awarded on July 13, 2023)
    Ph. D.
    tapendu@metal.iiests.ac.in

    Ankit Bhattacharjee (pursuing)
    Ph. D.
    021.ankitbhattacharjee@gmail.com

    Research:
    Wire arc additive manufacturing of Ni based multi-component alloys

    Citations


    Google Scholar
    CITATION H-INDEX I-10 INDEX
    2634 28 49
    Research Gate
    PUBLICATIONS CITATION H-INDEX
    76 2315 27
    Scopus
    DOCUMENTS CITATION H-INDEX
    82 2093 25

    Created: 23 November 2019