Pre-loader

Amit Roy Chowdhury

Academic Qualifications


  • PhD- Jadavpur university (1997)
  • M.Tech- IIT Kharagpur (1992)
  • B.E- B.E College, Shibpur (1989).

Research Statement


  • Finite Element Method
  • Solid Mechanics
  • Biomechanics
  • Engineering Mechanics

Latest Publications


  • 1 D. Dutta Majumdar, D. P. Mondal, A. K. Jha, M. Ghosh and A. Roychoudhury, Fretting Wear Resistance of Titanium Foam Developed by Powder Metallurgy Route, Procedia Manufacturing 35C (2019) pp. 833-839., 2019
  • 2 Pawan Kumar, Amit Roy Chowdhury, Saroj Basantia, “Micromechanical modeling of ferrite-austenite interphase of 23Cr-6Ni-3Mo duplex stainless steel with an initial equiaxed austenite morphology using finite element methods”, Lecture Notes in Mechanical Engineering Springer, manuscript number ICME1135. (accepted), 2019
  • 3 S Sarkar, TP Sahu, A Datta, N Chandra, A Chakraborty, P Datta, S Majumder*, A Roy Chowdhury, Mechanical response at peri-implant mandibular bone for variation of pore characteristics of implants: A Finite Element Study, Acta of Bioengineering and Biomechanics; 21 (2); 2019; (DOI:10.5277/ABB-01294-2019-02), 2019
  • 4 A Pal, P Nasker, S Paul, AR Chowdhury, A Sinha, M Das, Strontium doped hydroxyapatite from Mercenaria clam shells: Synthesis, mechanical and bioactivity study, Journal of the mechanical behavior of biomedical materials 90, 328-336, 2019
  • 5 PP Maity, D Dutta, S Ganguly, K Kapat, K Dixit, AR Chowdhury, ..., Isolation and mass spectrometry based hydroxyproline mapping of type II collagen derived from Capra hircus ear cartilage, Communications biology 2 (1), 146, 2019
  • 6 JK Biswas, TP Sahu, M Rana, S Roy, SK Karmakar, S Majumder,, Design factors of lumbar pedicle screws under bending load: A finite element analysis, Biocybernetics and Biomedical Engineering 39 (1), 52-62, 2019
  • 7 S Chatterjee, S Dey, S Majumder, A Roy Chowdhury, S Datta, Computational intelligence based design of implant for varying bone conditions, International journal for numerical methods in biomedical engineering, e3191, 2019
  • 8 A Ghosh, S Raha, S Dey, K Chatterjee, AR Chowdhury, A Barui, Chemometric analysis of integrated FTIR and Raman spectra obtained by non-invasive exfoliative cytology for the screening of oral cancer, Analyst, 2019
  • 9 S Chatterjee, S Majumder, A Roy Chowdhury, S Pal, Problems with use of trans-tibial prosthesis, Journal of Medical Imaging and Health Informatics 6 (2), 269-284, 2018
  • 10 D. Dutta Majumdar, A. Roy Chowdhury, M. Ghosh;, Titanium and its alloys for bio-implant applications;, IIM Metal News (ISSN: 0972-0480), Vol. 21, No.2, February 2018, pp 6-9., 2018
  • View More

    Research Areas


    • Engineering Mechanics
    • Biomechanics
    • Solid Mechanics
    • Finite Element Method

    Publications


  • 1 D. Dutta Majumdar, D. P. Mondal, A. K. Jha, M. Ghosh and A. Roychoudhury, Fretting Wear Resistance of Titanium Foam Developed by Powder Metallurgy Route, Procedia Manufacturing 35C (2019) pp. 833-839., 2019
  • 2 Pawan Kumar, Amit Roy Chowdhury, Saroj Basantia, “Micromechanical modeling of ferrite-austenite interphase of 23Cr-6Ni-3Mo duplex stainless steel with an initial equiaxed austenite morphology using finite element methods”, Lecture Notes in Mechanical Engineering Springer, manuscript number ICME1135. (accepted), 2019
  • 3 S Sarkar, TP Sahu, A Datta, N Chandra, A Chakraborty, P Datta, S Majumder*, A Roy Chowdhury, Mechanical response at peri-implant mandibular bone for variation of pore characteristics of implants: A Finite Element Study, Acta of Bioengineering and Biomechanics; 21 (2); 2019; (DOI:10.5277/ABB-01294-2019-02), 2019
  • 4 A Pal, P Nasker, S Paul, AR Chowdhury, A Sinha, M Das, Strontium doped hydroxyapatite from Mercenaria clam shells: Synthesis, mechanical and bioactivity study, Journal of the mechanical behavior of biomedical materials 90, 328-336, 2019
  • 5 PP Maity, D Dutta, S Ganguly, K Kapat, K Dixit, AR Chowdhury, ..., Isolation and mass spectrometry based hydroxyproline mapping of type II collagen derived from Capra hircus ear cartilage, Communications biology 2 (1), 146, 2019
  • 6 JK Biswas, TP Sahu, M Rana, S Roy, SK Karmakar, S Majumder,, Design factors of lumbar pedicle screws under bending load: A finite element analysis, Biocybernetics and Biomedical Engineering 39 (1), 52-62, 2019
  • 7 S Chatterjee, S Dey, S Majumder, A Roy Chowdhury, S Datta, Computational intelligence based design of implant for varying bone conditions, International journal for numerical methods in biomedical engineering, e3191, 2019
  • 8 A Ghosh, S Raha, S Dey, K Chatterjee, AR Chowdhury, A Barui, Chemometric analysis of integrated FTIR and Raman spectra obtained by non-invasive exfoliative cytology for the screening of oral cancer, Analyst, 2019
  • 9 S Chatterjee, S Majumder, A Roy Chowdhury, S Pal, Problems with use of trans-tibial prosthesis, Journal of Medical Imaging and Health Informatics 6 (2), 269-284, 2018
  • 10 D. Dutta Majumdar, A. Roy Chowdhury, M. Ghosh;, Titanium and its alloys for bio-implant applications;, IIM Metal News (ISSN: 0972-0480), Vol. 21, No.2, February 2018, pp 6-9., 2018
  • 11 Sudipto Datta, Ankita Das, Pranabesh Sasmal, Sumant Bhutoria, Amit Roy Chowdhury, and Pallab Datta,, Alginate-poly(amino acid) extrusion printed scaffolds for tissue engineering applications, International Journal of Polymeric Materials and Polymeric Biomaterials, 2018,, 2018
  • 12 JC Misra, B Mallick, A Sinha, AR Chowdhury., Impact of Cattaneo-Christov heat flux on electroosmotic transport of third order fluids in a magnetic environment., Article in European Physical Journal Plus · May 2018, 2018
  • 13 Biswas, J.K., Dey, S., Karmakar, S.K., RoyChowdhury, A., Datta, A.;, "Design of Patient Specific Spinal Implant (Pedicle Screw Fixation) using FE Analysis and Soft Computing Techniques"., Current Medical Imaging Reviews Vol. 14 (2018), 2018
  • 14 DD Majumdar, DP Mondal, M Ghosh, A Roychoudhury, Wear Behavior of Cenosphere Dispersed Titanium Composite Foam Developed by Powder Metallurgy Route, Materials Science Forum 941, 2047-2053, 2018
  • 15 K Bhowmik, T Nandy, P Kumar, N Khutia, AR Chowdhury, Prediction of Directional Young's Modulus of Particulate Reinforced MMC using Finite Element Methods, IOP Conference Series: Materials Science and Engineering 377 (1), 012057, 2018
  • 16 JC Misra, B Mallick, A Sinha, AR Chowdhury, Impact of Cattaneo-Christov heat flux on electroosmotic transport of third-order fluids in a magnetic environment, The European Physical Journal Plus 133 (5), 195, 2018
  • 17 S Sarkar, S Majumder, A Roy Chowdhury, Factors affecting diffuse axonal injury under blunt impact and proposal for a head injury criteria: A finite element analysis, Critical Reviews™ in Biomedical Engineering; vol 46 (4), 2018
  • 18 K Bhowmik, P Kumar, N Khutia, AR Chowdhury, Evaluation of Directional Strength of SWCNT Reinforced Nanocomposites: A Finite Element Study, Materials Today: Proceedings 5 (9), 20528-20534, 2018
  • 19 K Bhowmik, P Kumar, N Khutia, AR Chowdhury, Estimation of Effective Directional Strength of Single Walled Wavy CNT Reinforced Nanocomposite, IOP Conference Series: Materials Science and Engineering 338 (1), 012016, 2018
  • 20 JK Biswas, M Rana, S Roy, S Majumder, SK Karmakar, A Roy Chowdhury, Effect of range of motion (ROM) for pedicle-screw fixation on lumbar spine with rigid and semi-rigid rod materials: A finite element study, IOP Conference Series: Materials Science and Engineering 402 (1), 012146, 2018
  • 21 R Maity, S Majumder, A Roy Chowdhury, S Saha, Effect of plate geometry modifications to reduce stress shielding during healing stages for tibial fracture fixation, Journal of long-term effects of medical implants 28 (2), 2018
  • 22 JK Biswas, S Banerjee, S Majumder, S Roy, S Saha, A Roy Chowdhury, EFFECT OF PEDICLE-SCREW FIXATION IN LUMBAR SPINE AT L3-L5 LEVEL: A FINITE ELEMENT STUDY, Journal of the Mississippi Academy of Sciences 63 (S1), 266-275, 2018
  • 23 S Datta, R Barua, R Sarkar, A Barui, AR Chowdhury, P Datta, Design and development of alginate: Poly-l-lysine scaffolds by 3D bio printing and studying their mechanical, structural and cell viability properties., IOP Conference Series: Materials Science and Engineering 402 (1), 012113, 2018
  • 24 JK Biswas, S Roy, S Majumder, SK Karmakar, S Saha, A Roy Chowdhury, Artificial Intervertebral Disc Replacement to Provide Dynamic Stability to the Lumbar Spine: A Finite Element Study, Journal of long-term effects of medical implants 28 (2), 2018
  • 25 S Datta, R Sarkar, V Vyas, S Bhutoria, A Barui, AR Chowdhury, P Datta, Alginate-honey bioinks with improved cell responses for applications as bioprinted tissue engineered constructs, Journal of Materials Research 33 (14), 2029-2039, 2018
  • 26 Biswas, J.K., Rana, M., Majumder, S., Karmakar, S.K. and Roychowdhury, A., Effect of two-level pedicle-screw fixation with different rod materials on lumbar spine: A finite element study, 23(2), 258-265, Journal of Orthopaedic Science, 2018
  • 27 Roy, S., Dey, S., Khutia, N., Chowdhury, A.R. and Datta, S., Design of patient specific dental implant using FE analysis and computational intelligence techniques., 65, 272-279, Applied Soft Computing, 2018
  • 28 Pal, Anindya, Sudeep Paul, Amit Roy Choudhury, Vamsi Krishna Balla, Mitun Das, and Arijit Sinha, Synthesis of hydroxyapatite from Lates calcarifer fish bone for biomedical applications., 203, 89-92, Materials Letters, 2017
  • 29 Pal, A., Maity, S., Chabri, S., Bera, S., Chowdhury, A.R., Das, M. and Sinha, A., Mechanochemical synthesis of nanocrystalline hydroxyapatite from Mercenaria clam shells and phosphoric acid., 3(1), 015010, Biomedical Physics & Engineering Express, 2017
  • 30 Paul, S., Pal, A., Choudhury, A.R., Bodhak, S., Balla, V.K., Sinha, A. and Das, M., Effect of trace elements on the sintering effect of fish scale derived hydroxyapatite and its bioactivity, 43(17), 15678-15684, Ceramics International, 2017
  • 31 Sahoo, A., Majumder, S. and Roychowdhury, A., Car occupant response: finite element analysis of knee-thigh-hip complex under frontal impact., 9(4), 311-327, International Journal of Vehicle Safety, 2017
  • 32 Roy, S., Das, M., Chakraborty, P., Biswas, J.K., Chatterjee, S., Khutia, N., Saha, S. and RoyChowdhury, A., Optimal selection of dental implant for different bone conditions based on the mechanical response., 19(2), 11-20, Acta of bioengineering and biomechanics, 2017
  • 33 D. Dutta Majumdar, D. P. Mondal, A. Roy Chowdhury, H. Rao, and J. Dutta Majumdar;, Studies on Titanium Cenosphere Composite Developed by Powder Metallurgy Route;, Advanced Materials Research (ISSN print 1022-6680), Vol. 1139, 2016, pp 55-58., 2016
  • 34 Kumar, P. and Roy Chowdhury, A.;, A Brief Review on Grain Refinement in Steel Through Dynamic Strain Induced Transformation., Journal of Materials Science & Surface Engineering. 4: 436-443., 2016
  • 35 Kumar, P. and Roy Chowdhury, A.;, Precipitation of Copper and Grain Refinement in Low Carbon Steel in Hot Rolling., Journal of Materials Science & Surface Engineering. 5:428-431., 2016
  • 36 Kumar, P., Banerjee, M.K., Hodgson, P. and Roy Chowdhury, A.;, Dynamic Re-Crystallization of Low Carbon Steel in Plain Strain Condition., International Journal of Mechanical Engineering and Robotics Research, 5(2), p.160., 2016
  • 37 Sandipan Roy, Debojyoti Panda , Arunava Deb, Sauradeep Bhowmick, Niloy Khutia, Amit Roy Chowdhury ;, Optimization of Effective Modulus and stress concentration for different Pore geometries of Titanium Materials., The Indian journal of Biomechanics., 2016
  • 38 Majumder, S., Chowdhury, A.R. and Saha, S., Electromagnetic Response of Bones Adjacent to the Dental Root Before and After Dental Implantation., 26(4), 295-302, Journal of long-term effects of medical implants, 2016
  • 39 Roy, S., Khutia, N., Das, D., Das, M., Balla, V.K., Bandyopadhyay, A. and Chowdhury, A.R., Understanding compressive deformation behavior of porous Ti using finite element analysis., 64, 436-443, Materials Science and Engineering: C, 2016
  • 40 PS Banerjee, R Pradhan, A Roy Chowdhury, SK Karmakar, Investigation of stresses developed in natural and implanted human cervical spine by finite element method, Journal of Advanced Medical and Dental Sciences Research. 3 (1), 9, 2015
  • 41 Talukdar R.G., Das M., Majumder S., Choudhury, A.R., Optimization of Solid UHMWPE with porosity as an cervical disc implant., 10(S11), 10511–10515, International Journal of Applied Engineering Research, 2015
  • 42 S Roy, D Panda, N Khutia, AR Chowdhury, Pore geometry optimization of titanium (Ti6Al4V) alloy, for its application in the fabrication of customized hip implants, International journal of biomaterials Vol. 4 page 445, 2014
  • 43 JK Biswas, S Karmakar, S Majumder, PS Banerjee, S Saha, ..., Optimization of spinal implant screw for lower vertebra through finite element studies, Journal of long-term effects of medical implants 24 (2-3), 2014
  • 44 MS Kaiser, S Datta, A Roy Chowdhury, MK Banerjee, Effect of prior cold work on tensile properties of Al–6Mg alloy with minor scandium additions, Canadian Metallurgical Quarterly. 53 (4), 486-493, 2014
  • 45 PS Banerjee, A Roychoudhury, SK Karmakar, Morphological and Kinematic aspects of Human Spine–As design inputs for developing Spinal Implants, J. Spine 2 (4), 2-5, 2013
  • 46 PK Maji, A Roy Chowdhury, D Datta, Minimizing Stress Shielding Effect of Femoral Stem—A Review, Journal of Medical Imaging and Health Informatics 3 (2), 171-178, 2013
  • 47 S Majumder, A Roy Chowdhury, S Pal, Hip fracture and anthropometric variations: dominance among trochanteric soft tissue thickness, body height and body weight during sideways fall, Clinical biomechanics 28 (9-10), 1034-1040, 2013
  • 48 MS Kaiser, S Datta, PP Bandyopadhyay, A Guha, A Roy Chowdhury, ..., Effect of grain refinement through minor additions of scandium and zirconium on the machinability of Al–Mg alloys, Journal of The Institution of Engineers (India): Series D 94 (1), 17-24, 2013
  • 49 PS Banerjee, A Roychoudhury, SK Karmakar, Morphometric analysis of the cervical spine of Indian population by using computerized tomography, Journal of Medical & Allied Sciences Vol(2), Issue-2, pp. 66-76., 2012
  • 50 PK Maji, A Roy Chowdhury, D Datta, Investigating the morphology of the proximal femur of the Indian population towards designing more suitable THR implants, Journal of long-term effects of medical implants 22 (1), 2012
  • 51 PS Banerjee, A Roychoudhury, SK Karmakar, Biomechanical Remedies for Degeneration of Cervical Spine—A Review of Literature, Journal of Medical Imaging and Health Informatics 2 (4), 343-351, 2012
  • 52 JK Biswas, SK Karmakar, S Majumder, A Roy Chowdhury, A finite element study of spinal implant (pedicle screw) design for lumbar (L3–L5) vertebra, Indian J. Biomech 3, 50-60, 2012
  • 53 AR Chowdhury, A Kashi, S Saha, A comparison of stress distributions for different surgical procedures, screw dimensions and orientations for a Temporomandibular joint implant, Journal of Biomechanics 44 (14), 2584-2587, 2011
  • 54 Roychowdhury, A., Kashi, A., Saha, S.,, Patient specific optimization of TMJ Implant., Journal of Biomechanics Vol. 44(3) pp. 241-247,, 2010
  • 55 A Kashi, AR Chowdhury, S Saha, Finite element analysis of a TMJ implant, Journal of dental research 89 (3), 241-245, 2010
  • 56 N Nandi, S Chandra Dutta, A Roy Chowdhury, Explanation of seismic failure possibilities through dynamic and response analysis of earthen dams, Dam Engineering 21 (1), 45, 2010
  • 57 Ghosh, U.B., Sengupta, D., Roy Chowdhury, A., Pal, S.,, Biomechanical Analysis of CT-Scan based Custom made Hip Prosthesis with an Optimal Hip Ball Using FEA,, Journal of long term effects of Medical Implants. Vol. 19(1): pp. 31-41., 2009
  • 58 AR Chowdhury, WT Hayes, VJ Rasquinha, Proposed Frequencies of a Vibrator Used for Implant Retrieval at the Time of Hip Joint Revision Surgery, Journal of long-term effects of medical implants 19 (2), 2009
  • 59 S Majumder, A Roy Chowdhury, S Pal, Effects of body configuration on pelvic injury in backward fall simulation using 3D finite element models of pelvis–femur–soft tissue complex, Journal of Biomechanics 42 (10), 1475-1482, 2009
  • 60 A Roy Chowdhury, Application of the finite element method in orthopedic implant design, Journal of long-term effects of medical implants 19 (1), 2009
  • 61 S Sarkar, A Roychowdhury, U Ghosh;, Prediction of subdural hematoma based on a 3D finite element human head model., International journal of vehicle safety Vol. 3 (3) page 276-294, 2008
  • 62 Lenka, P.K., Roy Chowdhury, A., Kumar, R,., Design & Development of Lower Extremity Paediatric Prosthesis, a Requirement in Developing Countries., Journal of Physical Medicine & Rehabilitation Vol. 19(1): pp. 8-12., 2008
  • 63 Roy, T., Roy Chowdhury, A.,, Fatigue analysis of implanted dental screw., Indian Journal of Biomechanics (India), Vol. 1,. pp. 30- 36, 2008
  • 64 Sahoo, A., Ghosh, A., Roy Chowdhury A.,, Optimum angle of screw for fixing plate of fractured Femur., Indian Journal of Biomechanics (India), Vol. 2, pp. 24-29., 2008
  • 65 S Majumder, A Roy Chowdhury, S Pal, Three-dimensional finite element simulation of pelvic fracture during side impact with pelvis–femur–soft tissue complex, International Journal of Crashworthiness 13 (3), 313-329, 2008
  • 66 S Majumder, A Roy Chowdhury, S Pal, Finite element study of side impact on pelvis with car door padding, International journal of vehicle safety 3 (4), 338-350, 2008
  • 67 S Majumder, A Roy Chowdhury, S Pal, Experimental validation of three-dimensional finite element model of pelvis-femur-soft tissue complex under side impact loading, International Journal of Vehicle Safety 3 (2), 117-134, 2008
  • 68 S Majumder, A Roy Chowdhury, S Pal, Effects of trochanteric soft tissue thickness and hip impact velocity on hip fracture in sideways fall through 3D finite element simulations, Journal of biomechanics 41 (13), 2834-2842, 2008
  • 69 MS Kaiser, S Datta, A Roy Chowdhury, MK Banerjee, Effect of scandium on the microstructure and ageing behaviour of cast Al–6Mg alloy, Materials Characterization 59 (11), 1661-1666, 2008
  • 70 MS Kaiser, S Datta, A Roy Chowdhury, MK Banerjee, Effect of scandium additions on the tensile properties of cast Al-6Mg alloys, Journal of materials engineering and performance 17 (6), 902, 2008
  • 71 A Deb, S Majumder, A Roy Chowdhury, Biomechanical Study of the Lumbar Spine With and Without Implant: A Finite Element Approach, Journal of Long-Term Effects of Medical Implants 18, 2008
  • 72 Lenka, P., Daripa, R., Kumar, R., Roy Chowdhury, A., Tibarewala, D.N.,, Stress Analysis of BK Prosthesis with Finite Element Method,., Indian Journal of Biomechanics, Vol.1, No.1, pp. 75-82., 2007
  • 73 S Majumder, A Roy Chowdhury, S Pal;, Simulation of hip fracture in sideways fall using a 3D finite element model of pelvis–femur–soft tissue complex with simplified representation of whole body, Medical engineering & physics 29 (10), 1167-1178, 2007
  • 74 MS Kaiser, S Datta, A Roy Chowdhury, MK Banerjee, Ageing effect of ternary and quaternary additions on the fracture toughness behaviour of cast Al-Mg alloys, JOURNAL-INSTITUTION OF ENGINEERS INDIA PART MM METALLURGY AND MATERIAL …, 2007
  • 75 MS Kaiser, S Datta, A Roy Chowdhury, MK Banerjee, Age hardening behavior of wrought Al–Mg–Sc alloy, Materials and Manufacturing Processes 23 (1), 74-81, 2007
  • 76 Sahoo, A., Ghosh A., Roy Chowdhury, A.,, Stress analysis of cracked and fractured femur with fixing plate using finite element method., Journal of the Institute of Engineers (India), Vol. 86, pp. 24-29., 2005
  • 77 S Majumder, S Sarkar, A Roy Chowdhury, S Pal, CT Scan Based Reconstruction of 3D Images for Realistic Analysis by Finite Element Method, Advances in Medical Diagnostic Techniques and Procedures 169, 2005
  • 78 S Majumder, A Roy Chowdhury, S Pal, Biomechanical analysis of human pelvis under muscolo-skeletal load using 3D finite element method International, Journal of Applied Mechanics and Engineering 10 (4), 647-665, 2005
  • 79 N Nandi, A Roy Chowdhury, SC Dutta, Analysis of shear failure of earthen dams, Dam engineering, 255-282, 2005
  • 80 S Majumder, A Roy Chowdhury, S Pal, An algorithm to calculate the components of all muscle forces during each phases of the gait cycle, for the pelvic-femur complex, Journal of Mechanics in Medicine and Biology 5 (04), 539-548, 2005
  • 81 A Roy Chowdhury, S Gupta, PEC Vidyasagara, S Pal, Wear studies of frequently used implant materials Trend Biomater., Artif. Organs 17, 135-140, 2004
  • 82 S Majumder, A Roy Chowdhury, S Pal, Variations of stress in pelvic bone during normal walking, considering all active muscles Trends, Biomater Artif Organs 17 (2), 48-53, 2004
  • 83 S Sarkar, S Majumder, A Roy Chowdhury, Response of human head under static & dynamic load using finite element method Trends, Biomater Artif Organs 17 (2), 130-4, 2004
  • 84 S Majumder, A Roy Chowdhury, S Pal, Dynamic response of the pelvis under side impact load–a three-dimensional finite element approach, International journal of crashworthiness 9 (1), 89-103, 2004
  • 85 Roy Chowdhury, A., Pal, S. and Saha, S., Finite Element Analysis of an Artificial Temporal Mandibular joint.”, Automedica, Vol. 20, pp. 283-295., 2001
  • 86 AR Chowdhury, S Pal, Stress analysis of an artificial temporal mandibular joint, Critical Reviews™ in Biomedical Engineering 28 (3&4), 2000
  • 87 AR Chowdhury, S Pal, A 3-D FEM analysis of single and multiple screw-root dental implant fixed in a mandible, Critical Reviews™ in Biomedical Engineering 28 (3&4), 2000
  • 88 S Pal, A Roy Chowdhury, UHMWPE Contour Affects the Stress and Tribology of Knee Prostheses, ASME-PUBLICATIONS-BED 29, 555-555, 1995
  • 89 S Pal, A Roy Chowdhury, Design Analysis of Single Implanted Tooth, ASME-PUBLICATIONS-BED 29, 101-101, 1995
  • 1 R Barua, S Datta, P Datta, AR Chowdhury, Scaffolds and Tissue Engineering Applications by 3D Bio-Printing Process: A New Approach, IGI Global - Design, Development, and Optimization of Bio-Mechatronic Engineering …Chapter 4, 78 - 99, , 2019
  • 2 R Barua, S Datta, A Roy Chowdhury, P Datta, Importance of 3D Printing Technology in Medical Fields, IGI Global - Additive Manufacturing Technologies From an Optimization Perspective,Chapter 2, 21-40, , 2019
  • 3 R Barua, S Datta, AR Chowdhury, P Datta, Advances in MEMS and Micro-Scale Technologies for Application in Controlled Drug-Dosing Systems: MEMS-Based Drug Delivery Systems, IGI Global - Design and Development of Affordable Healthcare Technologies,Chapter 7, 165-179, , 2018
  • Patents


    # Patents Year

    Projects


    • Heat and Mass Transfer in Physiological fluid dynamics Modelling and simulation, Sponsored
      Completed
    • Development of Learning Tools for Crystallographical Study of Materials using Multimedia, Sponsored
      Completed
    • Study on Aging Behaviour of Al-Mg-Sc Alloy with Quarternary Addition, Sponsored
      Completed
    • Machine Learning System for Thermomechanically HSLS Steel, Sponsored
      Completed
    • Design and Development of Artificial Knee Implant, Sponsored
      Completed
    • Design and Development of Pedal Reciprocating Pump, Sponsored
      Completed
    • Design, analysis and Development of Dental Implant, Sponsored
      Completed
    • Dynamic response of the human head under impact loading by finite element method, Sponsored
      Completed
    • Computer Aided Design, Analysis and Development of Patient Specific Prosthesis for Different Human Joints, Specially Hip Joint on Indian Perspective, Sponsored
      Completed
    • Computer aided design, analysis and development of patient specific dental implant on Indian perspective, Sponsored
      Completed
    • Development of Bone Condition Monitoring Technique using Ultrasonographic Sensor, Sponsored
      Completed
    • Design and Development of Pedibarograph System for measuring foot pressure for normal and Diabetic patients, Sponsored
      Completed
    • Inter Institutional Translational project for Implant Development, Sponsored
      Ongoing
    • Design and Manufacturing of Patient specific DentalImplants composed of Porous Titanium functionalized with Oseeo-Integration - Promoting and antibacterial Coatings, Sponsored
      Ongoing
    • Functional Optimization and Development of Polymer Carbon Nano Composites for Customized Bone Grafting, Sponsored
      Ongoing

    Research Groups


    Anish Deb
    Ph. D
    +91 98835 01453
    anishdebjgec@gmail.com

    Jayanta Kumar Biswas
    Ph. D
    +91 94339 46894
    biswasjayanta1983@gmail.com

    Krishnendu Bhowmik
    Ph. D
    +91 90513 27240
    krishnendu.besu@gmail.com

    Pawan Kumar
    Ph. D
    pawankumard014@gmail.com

    Sandipan Roy
    Ph. D
    +91 94744 51627
    sandipan888roy@gmail.com

    Subhrangshu Choudhury
    Ph. D.
    9432829087
    ruubeel@gmail.com

    Sandipan Roy
    Ph. D.
    sandipan888roy@gmail.com

    Research:
    Design and Development of Implant Material and Its Application in Patient Specific Dental Prosthesis

    Amalendu Sahoo
    Ph. D
    +91 94326 47772
    sahoo_amalendu@rediffmail.com
    Subhomoy Chatterjee
    Ph. D
    +91 84440 80809
    subho.mpo@gmail.com
    Dibyendu Dutta Majumder
    Ph. D.
    9475354549
    ddmajumdar@gmail.com

    Research:
    Characteristics and Bio-compatibility Evaluation of Porous Titanium for Bio-medical Applications

    Created: 23 November 2019