1
A. Das, B. Barman and N. Nandi, On some aspects of flow characteristics of the bifurcated channel –an experimental approach, 29 (2), (published online on 14.03.2022), 147-153, ISH journal of Hydraulic Engineering, 2023
2
Subhasish Guchhait, Pratim Kumar, Experimental and numerical studies of interaction between liquid droplets with hot surfaces under different conditions, 18 (1), Asia-Pacific Journal of Chemical Engineering, 2023
3
V. Pandey,P. Arora ,S. K. Gupta ,N. Khutia, P. P. Dey, An improved strain path dependent model under multiaxial cyclic loading for simulating material response of low C-Mn steel, 167 (2023), 107322, International Journal of Fatigue, Elsevier, 2023
4
Bose, Chandra and Pal, Subham and Haldar, Salil, Bending Analysis of Composite Plate with Cutout Carrying Uniformly Distributed Load, 1--13, Journal of The Institution of Engineers (India): Series C, 2023
5
A Acharjya, R Roy, Estimating seismic response to bidirectional excitation per unidirectional analysis: A reevaluation for motions with fling-step using SDOF systems, 164, 107563: 1-21, Soil Dynamics and Earthquake Engineering, 2023
6
Aniket Chakrabarty, Pritam Chakraborty, Roopam Jain,Vivek Kr. Sahu, N.P.Gurao, H.N. Bar, Niloy Khutia, Influence of scanning and building strategies on the deformation behavior of additively manufactured AlSi10Mg: CPFEM and Finite Element studies, Accepted for publication, 2023, Metals and Materials International, Springer, 2023
7
Aniket Chakrabarty, Rohit Sahu, Ashutosh Kumar, H.N. Bar, Leonhard Hitzler and Niloy Khutia, Finite Element evaluation of fracture toughness and crack propagation in LB-PBF AlSi10Mg, Accepted for publication, 2023, Continuum Mechanics and Thermodynamics,Springer, 2023
8
K. Bhowmik, N. Khutia, M. Tarfaoui, A. Basu, S. Akhtar, S. Dey, A. Roy Chowdhury, Influence of CNT defects on the elastic modulus of nanocomposite: multiscale simulation, 32, 2356–2369, J. Mater. Eng. Perform. (SCIE), 2023
9
Satya Prakash Pandey, Sandip Sarkar and Debashis Pal, Splitting of microbubble mediated by power-law carrier fluid inside a symmetric bifurcating channel, 35, 053104, Physics of Fluids, 2023
10
A. Mondal, S. Chatterjee, A. McDonald Tariang, L. Prince Raj, K. Debnath, Numerical investigation of on-demand fluidic winglet aerodynamic performance and turbulent characterization of a low aspect ratio wing, 10, 107-125, Advances in Aircraft and Spacecraft Science, 2023
11
L. Prince Raj ,Esmaeil , Bidesh Sengupta, H. Jeong, R. S. Myong, Coarray Fortran Parallel Implementation of a Finite Volume Method-Based Aircraft Ice Accretion Simulation Code, International Journal of Aeronautical and Space Sciences, 2023
12
S Sarkar, K Debnath, V K Das, B S Mazumder, Formation and migration of ripple pattern due to pure wave, 28(1), 21-33, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2022
13
P.Dutta, H. Chattopadhyay and N. Nandi, Numerical studies on turbulent flow field in a 90 degree pipe bend, 144 (6), 061104-1 to 061104-10, Journal of Fluids Engineering, ASME, 2022
14
Basantia S. K., Bhattacharya A., Khutia N., Das D., Influence of microstructural parameters on nanohardness of various dual-phase steels: Experiment, Finite Element simulation and Statistical analysis, 30, 103125, Materials Today Communications, Elsevier, 2022
15
Esmaeil Esmaeilifar, L. Prince Raj, R.S.Myong, Computational simulation of aircraft electrothermal de-icing using an unsteady formulation of phase change and runback water in a unified framework, Aerospace Science and Technology, 2022
16
K. Bhowmik, T. Mukhopadhyay, M. Tarfaoui, N. Khutia, A. Roy Chowdhury, K. Lafdi, Damage modeling of MWCNT reinforced Carbon/Epoxy composite using different failure criteria: A comparative Study, 128, 549, Appl. Phys. A (SCI), 2022
17
Pal, Subham and Kalita, Kanak and Haldar, Salil, Genetic algorithm-based fundamental frequency optimization of laminated composite shells carrying distributed mass, 1--13, Journal of The Institution of Engineers (India): Series C, 2022
18
Ghosh, Sabyasachi and Haldar, Sudeshna and Haldar, Salil, Free vibration analysis of laminated composite plate with elastic point and line supports using finite element method, 1--12, Journal of The Institution of Engineers (India): Series C, 2022
19
Kalita, Kanak and Pal, Subham and Haldar, Salil and Chakraborty, Shankar, A hybrid TOPSIS-PR-GWO approach for multi-objective process parameter optimization, 1--16, Process Integration and Optimization for Sustainability, 2022
20
Kalita, Kanak and Haldar, Salil and Chakraborty, Shankar, A comprehensive review on high-fidelity and metamodel-based optimization of composite laminates, 1--36, Archives of Computational Methods in Engineering, 2022
21
S K Singh, J Chowdhury, S Ghosh, P K Raushan, K Debnath, P Kumar, Experimental and numerical investigation of flow characteristics in an open rectangular cavity, 28 (Supp 1), 1--13, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2022
22
Chakrabarty A., Sahu V.K, Das A., Mukherjee S., Gurao N.P., Chakraborty P., Bar H.N., Khutia N., Study of the effect of two separate tilt angles of laser scanning lines on the microstructure and mechanical properties in direct metal laser sintered AlSi10Mg alloy, 28, 250–268, Metals and Materials International, Springer, 2022
23
Deepnil Dutta, Anubhav Dasgupta, Prince Raj Lawrence Raj, Koustuv Debnath, Drag Reduction and Turbulent Characteristics of a Low Aspect Ratio Wing with Fluidic On-Demand Winglet, 16, SAE International Journal of Aerospace, 2022
24
V K Das, K Debnath, B Sivakumar, On the evolution of turbulent characteristics of an eroding cohesive riverbank, 1-23, Stochastic Environmental Research and Risk Assessment, Springer Berlin Heidelberg, 2022
25
S Chaudhuri, V K Das, K Debnath, S Hansda, Embankment breaching at Indian Sundarban–an assessment on altered primary sediment index properties and fluvial flow parameters, 28(4), 449-460, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2022
26
S Sarkar, K Debnath, S K Singh, Near bed flow characteristics over the patch and non-patch zone due to pure wave, 1-9, Ships and Offshore Structures, Taylor & Francis, 2022
27
S Chaudhuri, M Pandey, K Debnath, G Oliveto, A comparative study on equilibrium scour volume around circular cylinders in clay–sand mixed cohesive beds, at near threshold velocity of sand–an experimental approach, 22(8), 6777-6791, Water Supply, IWA Publishing, 2022
28
S Sarkar, S Roy, K Barman, V K Das, K Debnath, Turbulence effect on the mechanics of ripple formation under regular wave, 131(2), 1-16, Journal of Earth System Science, Springer, 2022
29
S K Singh, K Debnath, Regular wave and turbulent current interaction in free surface flow, 8(2), 153-162, Journal of Ocean Engineering and Marine Energy, Springer, 2022
30
D Dutta, A Dasgupta, P R Lawrence Raj, K Debnath, Drag Reduction and Turbulent Characteristics of a Low Aspect Ratio Wing with Fluidic On-Demand Winglet, 16, 01-16-01-0003, SAE International Journal of Aerospace, 2022
31
V K Das, K Debnath, B Sivakumar, Does turbulence show fractal structure within a dynamic undercut of an alluvial riverbank?, 157, 111998, Chaos, Solitons & Fractals, Pergamon, 2022
32
S Hansda, V K Das, K Debnath, Temporal modulation of turbulence structure over progressive erosion boundary under influence of wave current combined flow, 22, 683–713, Environmental Fluid Mechanics, Springer, 2022
33
S Roy, V K Das, K Barman, B Mondal, K Debnath, Coupled dynamics of river bank undercut depth increment due to random velocity field, 21(3), 493-506, Environmental Engineering & Management Journal (EEMJ), 2022
34
J Shounda, K Barman, S Roy, K Debnath, Spatial-averaged turbulence statistics over regular arrays of hemispherical roughness, 44(3), 1-19, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, 2022
35
K. Bhowmik, S.K. Basantia, T. Roy, A. Bandyopadhyay, N. Khutia, A. Roy Chowdhury, Mechanical properties of MWCNT reinforced epoxy nanocomposites: experimental, micromechanical and numerical study, J. Inst. Eng. India Ser. D (DOI: https://doi.org/10.1007/s40033-022-00358-6), 2022
36
K. Bhowmik, T. Mukhopadhyay, M. Tarfaoui, N. Khutia, A. Roy Chowdhury, K. Lafdi, Damage modeling of MWCNT reinforced Carbon/Epoxy composite using different failure criteria: A comparative Study, 128, 549, Appl. Phys. A, 2022
37
K. Bhowmik, S.K. Basantia, T. Roy, A. Bandyopadhyay, N. Khutia, A. Roy Chowdhury, Mechanical properties of MWCNT reinforced epoxy nanocomposites: experimental, micromechanical and numerical study, 103, 575–586, J. Inst. Eng. India Ser. D (Scopus), 2022
38
K. Bhowmik, N. Khutia, M. Tarfaoui, M. Jana, K. Das, T. Roy, A.Bandyopadhyay, A. Roy Chowdhury, Influence of Multiwalled Carbon Nanotube (MWCNT) on Progressive Damage of Epoxy/Carbon Fiber Reinforced Structural Composite, 1-22, Polymer Composites, Wiley, 2022
39
K. Bhowmik, N. Khutia, M. Tarfaoui, M. Jana, K. Das, T. Roy, A. Bandyopadhyay, A. Roy Chowdhury, Influence of Multiwalled Carbon Nanotube (MWCNT) on Progressive Damage of Epoxy/Carbon Fiber Reinforced Structural Composite, 43, 7751–7772, Polym. Compos. (SCI), 2022
40
Krishnendu Bhowmik, Niloy Khutia, Mostapha TARFAOUI, Ayan Basu, Shamim Akhtar, Swati Dey,Amit Roy Chowdhury, Influence of CNT defects on the elastic modulus of nanocomposite: multiscale simulation, Journal of Materials Engineering and Performance,Springer, D.O.I: https://doi.org/10.1007/s11665-022-07287-1, 2022
41
V. Pandey, P. Arora, S. K. Gupta, N. Khutia, P. P. Dey, A phenomenological unified model for uniaxial and multiaxial LCF and ratcheting: From specimen to pressurized straight nuclear piping of SA333 C-Mn-steel, 44, 365, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, 2022
42
V K Das, S Chaudhuri, K Barman, S Roy, K Debnath, Pier scours in fine-grained non-cohesive sediment and downstream siltation, an experimental approach, 43(3), 365-382, Physical Geography, Taylor & Francis, 2022
43
S K Basantia, Md Abu Bakkar, A Bhattacharya, D Das, N Khutia, Predicting macro- and microscopic responses of dual-phase steels under low cycle fatigue based on multi-scale finite element methods, Journal of Materials Engineering and Performance, Springer, DOI: https://doi.org/10.1007/s11665-022-07298-y, 2022
44
A. Banerjee, M.P. Khan, A. Barui, P. Datta, A. Roy Chowdhury, K. Bhowmik, Finite Element Analysis of Influence of Cyclic Strain on Cells Anchored to Substrates with Varying Properties, 60, 171–187, Med. Biol. Eng. Comput. (SCI), 2022
45
P.M.Mohamed Abubacker Siddique, L. Prince Raj, Sensitivity analysis of geometric parameters on the aerodynamic performance of a multi-element airfoil, Aerospace Science and Technology, 2022
46
R Roy, A Acharjya, A Roy, A Santra, G Bhattacharya, Response of structures to bidirectional seismic loading: Research pogress and future directions, 148 (7), 03122002, Journal of Structural Engineering, 2022
47
C Pradhan, A Banerjee, R Roy, Evolution of a 3D model for free-standing rigid blocks and its behavior under base excitations, 142, 103992, International Journal of Non-Linear Mechanics, 2022
48
S Hansda, K Debnath, Turbulent flow structure over rough side-wall surface under wave-against-current motion, 236(1), 209-227, Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 2022
49
S Sarkar, V K Das, K Barman, K Debnath, Effect of the Wave on Sediment Suspension and the Morphological Pattern of Ripple Formation, 56(2), 207-223, Ocean Science Journal, Springer, 2021
50
S K Singh, A Khait, P K Raushan, K Debnath, Localized and distributed energy in wave-current flow, 143(1), 1-22, Journal of Offshore Mechanics and Arctic Engineering, ASME, 2021
51
S K Singh, P K Raushan, K Debnath, Experimental investigation of turbulence produced by stationary grid, 48(2), 69-82, International Journal of Fluid Mechanics Research, 2021
52
S. Saha, and N. Nandi, Effect of guide vane on turbulence characteristics for single-phase flow through 90-degree pipe bend, 14 (4), 1995-1208, Journal of Applied Fluid Mechanics (JAFM), 2021
53
Pal, Subham and Bose, Chandra and Haldar, Salil, Free vibration analysis of laminated composite plate with cut-out carrying concentrated and distributed mass, 102, 1447--1460, Journal of The Institution of Engineers (India): Series C, 2021
54
P. Das, N. Khutia, P. P. Dey, Punit Arora, Suneel. K. Gupta, Ratcheting and stress relaxation of SA333 Gr. 6 carbon steel samples under uniaxial multistep strain controlled condition, 43, 306, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, 2021
55
P K Raushan, S K Singh, K Debnath, Turbulence characteristics of oscillating flow through passive grid, 224, 1-13, Ocean Engineering, 2021
56
P. Dutta and N.Nandi, Numerical analysis on the development of vortex structure in 90 degree pipe bend, 21 (5), 261-273, Progress in Computational Fluid Dynamics (Inderscience Publishers), 2021
57
S K Singh, P K Raushan, P Kumar, K Debnath, Anisotropy of Reynolds stress tensor in combined wave-current flow, 143(5), Journal of Offshore Mechanics and Arctic Engineering, ASME, 2021
58
V K Das, S Hansda, K Debnath, S Chaudhuri, Riverbank stabilization based on the modulation of the near bank turbulence scales, 23(10), 15290-15313, Environment, Development and Sustainability, Springer, 2021
59
P K Raushan, S K Singh, K Debnath, Turbulence anisotropy with higher-order moments in flow through passive grid under rigid boundary influence, 235(19), 3859-3874, Proc IMechE Part C: J Mechanical Engineering Science, Sage, 2021
60
V K Das, S Hansda, K Debnath, S Chaudhuri, B S. Mazumder, Assessing the hydraulic performance of bamboo logs in riverbank stabilization: case study of Sundarbans, India, 66(1), Hydrological Sciences Journal, Taylor & Francis, 2021
61
P K Raushan, S K Singh, K Debnath, Role of rigid boundary on the decay of turbulence generated by passive-grid for free surface flow, 235(7), Proceedings of the Institution of Mechanical Engineers, UK, Part C: Journal of Mechanical Engineering Science, Sage, 2021
62
Basantia S K., Bhattacharya A., Khutia N., Das D., Plastic behavior of ferrite-pearlite, ferrite-bainite and ferrite-martensite steels: Experiments and micromechanical modelling, 27, 1025–1043 (2021), Metals and Materials International, Springer, 2021
63
S Roy, K Barman, K Debnath, B S Mazumder, Quantification of turbulent structures in and around the boundary region of a turbulent round jet released into counter-flow, 171, 108758, Measurement, 2021
64
D Chatterjee, BS Mazumder, S Ghosh, K Debnath, Turbulent flow characteristics over forward-facing obstacle, 22(3), Journal of Turbulence, 2021
65
Rene Roy and L. Prince Raj and Je-Hyun Jo and Min-Young Cho and Jin-Hwe Kweon and Rho Shin Myong, Multiphysics anti-icing simulation of a CFRP composite wing structure embedded with thin etched-foil electrothermal heating films in glaze ice conditions, Composite Structures, 2021
66
V K Das, K Debnath, S Roy, K Barman, S Hansda, B S Mazumder, Effect of turbulent structures on the riverbank erosion due to tidal influence: A case study from the Rupnarayan River, eastern India, 130(2), Journal of Earth System Science, 2021
67
Bidesh Sengupta, L. Prince Raj, M.Y.Cho, R.S.Myong, Computational simulation of ice accretion and shedding trajectory of a rotorcraft in forward flight with strong rotor wakes, 119, Aerospace Science and Technology, 2021
68
K. Bhowmik, S. Akhtar, R. K. Kalshyan, N. Khutia and A. Roy Chowdhury, CNT Reinforced Laminated Composite under In-Plane Tensile Loading: A Finite Element Study, 978, 323-329, Materials Science Forum, 2020
69
K Barman, S Roy, K Debnath, Characterization of eddy scales over tandem obstacles for surface wave-dominated flow, 118(12), 1922-1929, Current Science, 2020
70
P K Raushan, A Paul, S K Singh, K Debnath, Spatially-averaged turbulent flow characteristics over ribbed surface in presence of unidirectional wave over steady current, 100, 102154, Applied Ocean Research, 2020
71
R Roy, A Roy, G. Bhattacharya, Estimating seismic response of RC piers under unidirectional and bidirectional shaking: A mechanics-based approach, 146(7), 04020113:1-21, Journal of Structural Engineering, 2020
72
R Roy, A Roy, G. Bhattacharya, Discussion of “Combination Rules Used to Account for Orthogonal Seismic Effects: State-of-the-Art Review” by Jianze Wang, Henry V. Burton, and Kaoshan Dai, 146(8), 07020011:1-2, Journal of Structural Engineering, 2020
73
Y.M. Lee, J.H. Lee, L. Prince Raj, J.H Jo , R. S. Myong, Large-eddy simulations of complex aerodynamic flows over multi-element iced airfoils, 109, Aerospace Science and Technology, 2020
74
Raj, L Prince and Yee, K and Myong, RS, Sensitivity of ice accretion and aerodynamic performance degradation to critical physical and modeling parameters affecting airfoil icing, 105659, Aerospace Science and Technology, 2020
75
P. Kumar, An overview on the Dinitramide anion and compounds based on it, 62(3), 232-242, Indian Chemical Engineer, Taylor and Francis, 2020
76
VK Das, S Roy, K Barman, S Chaudhuri, K Debnath, Cohesive river bank erosion mechanism under wave-current interaction: A flume study, 129(1), 1-20, Journal of Earth System Science, 2020
77
VK Das, K Barman, S Roy, S Chaudhuri, K Debnath, Near bank turbulence of a river bend with self similar morphological structures, 191, CATENA, 2020
78
S Roy, K Barman, VK Das, K Debnath, BS Mazumder, Experimental Investigation of Undercut Mechanisms of River Bank Erosion Based on 3D Turbulence Characteristics, 7(1), Environmental Processes, 2020
79
S Roy, K Barman, K Debnath, Turbulence properties in and around the mixing region of the round jet against current, 95(3), Physica Scripta, 2020
80
SK Singh, PK Raushan, K Debnath, BS Mazumder, Higher order turbulent flow characteristics of oscillatory flow over a wall-mounted obstacle, 26(1), 84-95, ISH Journal of Hydraulic Engineering, 2020
81
Debashis Pal and Suman Chakraborty, Scaling laws for external fluid flow induced by controlled periodic heating of a solid boundary, 101, 033105, Physical Review E, 2020
82
Pal, S and Haldar, S and Kalita, K, Dynamic analysis of plates with cut-out carrying concentrated and distributed mass, 162(A3), International Journal of Maritime Engineering, 2020
83
Kalita, Kanak and Dey, Partha and Haldar, Salil and Gao, Xiao-Zhi, Optimizing frequencies of skew composite laminates with metaheuristic algorithms, 36, 741--761, Engineering with Computers, 2020
84
S K Singh, P K Raushan, K Debnath, B S Mazumder, Higher order turbulent flow characteristics of oscillatory flow over a wall-mounted obstacle, 26(1), 1--12, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2020
85
Chatterjee S, Roy S, Majumder S, Basu B, Roychowdhury A, Biomechanical analysis to probe role of bone condition and bodyweight in stiffness customization of femoral stem for improved periprosthetic biomechanical response, 142(10), 1–14, Journal of Biomechanical Engineering (ASME), 2020
86
A Paul, P K Raushan, S K Singh, K Debnath, Organized structure of turbulence in wave current combined flow over rough surface using spatio temporal averaging approach, 42(11), 1-17, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020
87
Firoz R., Basantia S. K., Khutia N., Bar H.N., Sivaprasad S., Murty G.V.S., Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650 °C, 845, 156276, Journal of Alloys and Compounds, Elsevier, 2020
88
Chakraborty A, Dutta P, Majumder S, Mondal SC, Roychowdhury A, Finite element and experimental analysis to select patient's bone condition specific porous dental implant, fabricated using additive manufacturing, 124, 1–10, Computers in Biology and Medicine (Elsevier), 2020
89
P. Kumar, R. Kumar, Heat of combustion studies for carbon black mixed ADN, KDN, and AP pellets, 81 (4), 93-99, Science and Technology of Energetic Materials, Japan Explosives Society, 2020
90
K. Bhowmik, S. Akhtar, R. K. Kalshyan, N. Khutia, A. Roy Chowdhury, CNT Reinforced Laminated Composite under In-Plane Tensile Loading: A Finite Element Study, 978, 323-329, Mater. Sci. Forum (Scopus), 2020
91
K Barman, P K Raushan, V K Das, S Roy, S Hansda, K Debnath, Turbulent Flow Characteristics in the Eroded Region of the Side-wall Bank, 19(8), Environmental Engineering and Management Journal, 2020
92
Sung Ki Jung, L. Prince Raj, A.Rahimi, H.Jeong, R.S.Myong, Performance evaluation of electrothermal anti-icing systems for a rotorcraft engine air intake using a meta model, Aerospace Science and Technology, 2020
93
P. Kumar, P. C. Joshi, DSC/TG and SEM Studies of Synthesized Potassium Sulphamate (PS) and Potassium Dinitramide (KDN) Crystals, 12 (1), 105-117, INCAS Bulletin, 2020
94
Raj, Prince Raj Lawrence and Jeong, Hojin and Roy, Rene and Kweon, Jin-Hwe and Myong, Rho Shin, Computational Simulation of an Electrically Heated Ice Protection System for Composite Leading Edges of Aircraft, SAE Technical Paper, 2019
95
P. Kumar, M. Varsheney, and A. Manash, Combustion performance studies of aluminum and boron based composite solid propellants in sub-atmospheric pressure regimes, Volume 8, Issue 4, 329-338, Propulsion and Power Research, Elsevier, 2019
96
A. Manash, P. Kumar, Comparison of burn rate and thermal decomposition of AP as oxidizer and PVC and HTPB as fuel binder based composite solid propellants, 15(2), 227-232, Defence Technology, Elsevier, 2019
97
P. Kumar, Advances in Phase Stabilization techniques of AN using KDN and other Chemical Compounds for Preparing Green Oxidizers, 15(6), 949-957, Defence Technology, Elsevier Publications, 2019
98
P K Raushan, S K Singh, K Debnath, Grid-generated turbulence in pulsating flow under the rigid boundary influence, 78, 291--305, European Journal of Mechanics-B/Fluids, Elsevier, 2019
99
V K Das, S Roy, Sayahnya, K Barman, S Chaudhuri, K Debnath, Study of clay--sand network structures and its effect on river bank erosion: an experimental approach, 78, 591, Environmental Earth Sciences, Springer, 2019
100
S Hansda, K Barman, S Roy, K Debnath, Quantification of turbulent eddies in time-space and frequency domain for wave-current combined flow over side-wall roughness, 186, 106080, Ocean Engineering, Elsevier, 2019
101
S Roy, K Barman K Debnath, Statistical Analysis of Flow Structures around a Circular Cylinder, 6, 773-787, Environmental Processes, Springer, 2019
102
S K Singh, P K Raushan, K Debnath, Role of multiple flow stages over submerged structure, 181, 59-70, Ocean Engineering, Elsevier, 2019
103
S K Singh, P K Raushan, K Debnath, B S Mazumder, Effect of surface wave on development of turbulent boundary layer over a train of rib roughness., 141(6), 061101, Journal of Offshore Mechanics and Arctic Engineering, ASME, 2019
104
V K Das, S Roy, K Barman, K Debnath, S Chaudhuri, B S Mazumder, Investigations on undercutting processes of cohesive river bank, 252(26), 110-124, Engineering Geology, Elsevier, 2019
105
S Roy, K Debnath, Impact of Frontal Round Jet on Vortex-synchronization Control around a Cylinder: A Turbulence Perspective, 46(7), Canadian Journal of Civil Engineering, Canadian Science Publishing, 2019
106
S Chaudhuri, K Debnath, S Roy, M K Manik, Flume study on contraction scour in clay–sand mixed cohesive bed., 25(1), 79-86, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2019
107
K Barman, K Debnath, B S Mazumder, Turbulence Over Chains of Hemispherical Ribs Under Waves in a Current, 55(1), 55-75, Water Resources Research, American Geophysical Union, Wiley, 2019
108
S Roy, V K Das, K Debnath, Characteristics of intermittent turbulent structures for river bank undercut depth increment, 172, 356-368, Catena, Elsevier, 2019
109
P. Dutta and N. Nandi, Numerical study on turbulent separation reattachment flow in pipe bends with different small curvature ratio, 100(6), 995-1004, The Institution of Engineers (India): Series C, Springer India, 2019
110
Debashis Pal and Suman Chakraborty, New regimes of dispersion in microfluidics as mediated by travelling temperature waves, 475 (2230), 20190382, Proceedings of the Royal Society A, 2019
111
K Barman, S Roy, V K Das, K Debnath, Effect of clay fraction on turbulence characteristics of flow near an eroded bank, 571, 87--102, Journal of Hydrology, Elsevier, 2019
112
S K Singh, K Debnath, Discussion of “Boundary layer development over non-uniform sand rough bed channel”, by Anurag Sharma and Bimlesh Kumar (2017), 25 (3), 282--282, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2019
113
S Roy, S Ghoshal, K Barman, V K Das, S Ghosh, K Debnath, Modulation of the recirculation region due to magneto hydrodynamic flow, 22 (1), 282--293, Engineering Science and Technology, an International Journal, Elsevier, 2019
114
Chatterjee S, Dey S, Majumder S, Roychowdhur A, Datta S, Computational intelligence based design of implant for varying bone conditions, 35(6), 1–17, International Journal for Numerical Methods in Biomedical Engineering (Wiley), 2019
115
Sarkar S, Sahu TP, Datta A, Chandra N, Chakraborty A, Datta P, Majumder S, Roychowdhury A, Mechanical response at peri-implant mandibular bone for variation of pore characteristics of implants: A finite element study, 21(2), 83-93, Acta of Bioengineering and Biomechanics (Wroclaw Univ Technology), 2019
116
Biswas JK, Sahu TP, Rana M, Roy S, Karmnakar SK, Majumder S, Roychowdhury A, Design factors of lumbar pedicle screws under bending load: A finite element analysis, 39(1), 52-62, Biocybernetics and Biomedical Engineering (Elsevier Science), 2019
117
Arpita Mondal, Chaitali Roy and Salil Haldar, Experimental and numerical studies on vibration characteristics of laminated composite shewed shells with cutout, V 161, 228-240, Composites Part B, 2019
118
Kanak Kalita, P. Dey and S. Haldar, XZ-Gao, Optimizing frequencies of skew composite laminates with metaheuristic algorithm, 1-21, Engineering with computers, 2019
119
Arpita Mandal, Chaitali Roy and Salil Haldar, Experimental and numerical modal analysis of composite laminated shells with cut-out, V-161, International Journal OF Maritime Engineering, 2019
120
Arpita Mandal, Chaitali Roy and Salil Haldar, Experimental and numerical free vibration analysis of laminated composite plates with arbitrary cut-out, 1-9, Journal of the Institution of Engineers (India), Series C, 2019
121
Salil Haldar, Aditi Majumder and Kanak Kalita, ‘Bending Analysis of Composite Skew Cylindrical Shell Panel, 70(1), 125-131, Structural Engineering and Mechanics, 2019
122
K Kalita, T Mukhopadhyay, P Dey, S Haldar, Genetic programming assisted multi-scale optimization for multi-objective dynamic performance of laminated composites: The advantage of more elementary-level analyses, 1-25, Neural Computing and Applications, 2019
123
Salil Haldar, Subham Pal, Kanak Kalita, Free Vibration of Skew Laminates— a Brief Review and Some Benchmark Results, International Journal OF Maritime Engineering, 2019
124
Kanak Kalita, P. Dey and S. Haldar, Search for accurate RSM metamodels for structural engineering, 1-19, Journal of Reinforced Plastics and Composites, 2019
125
Kanak Kalita, P. Dey, M Joshi and S. Haldar, A response surface modeling approach for multi-objective optimization of composite plate, 32(4), 455-466, Steel and Composite Structures, 2019
126
K. Kalita, P. Dey and S. Haldar, Robust genetically-optimized skew laminates, Vol 233, J. of Mechanical Engineering Sciences. Proceedings of the Institution of Mechanical Engineers, Part C, 2019
127
A Ghosh, S Raha, S Dey, K Chatterjee, AR Chowdhury, A Barui, Chemometric analysis of integrated FTIR and Raman spectra obtained by non-invasive exfoliative cytology for the screening of oral cancer, Analyst, 2019
128
S Chatterjee, S Dey, S Majumder, A Roy Chowdhury, S Datta, Computational intelligence based design of implant for varying bone conditions, International journal for numerical methods in biomedical engineering, e3191, 2019
129
JK Biswas, TP Sahu, M Rana, S Roy, SK Karmakar, S Majumder,, Design factors of lumbar pedicle screws under bending load: A finite element analysis, Biocybernetics and Biomedical Engineering 39 (1), 52-62, 2019
130
PP Maity, D Dutta, S Ganguly, K Kapat, K Dixit, AR Chowdhury, ..., Isolation and mass spectrometry based hydroxyproline mapping of type II collagen derived from Capra hircus ear cartilage, Communications biology 2 (1), 146, 2019
131
A Pal, P Nasker, S Paul, AR Chowdhury, A Sinha, M Das, Strontium doped hydroxyapatite from Mercenaria clam shells: Synthesis, mechanical and bioactivity study, Journal of the mechanical behavior of biomedical materials 90, 328-336, 2019
132
S Sarkar, TP Sahu, A Datta, N Chandra, A Chakraborty, P Datta, S Majumder*, A Roy Chowdhury, Mechanical response at peri-implant mandibular bone for variation of pore characteristics of implants: A Finite Element Study, Acta of Bioengineering and Biomechanics; 21 (2); 2019; (DOI:10.5277/ABB-01294-2019-02), 2019
133
Jo, J H and Raj, L Prince and Lee, Y M and Lee, J H and Myong, R S, Computational Analysis of Ridge Iced Airfoil Flow Field Using RANS and LES, 24, 8--18, Journal of Computational Fluids Engineering, 2019
134
Pawan Kumar, Amit Roy Chowdhury, Saroj Basantia, “Micromechanical modeling of ferrite-austenite interphase of 23Cr-6Ni-3Mo duplex stainless steel with an initial equiaxed austenite morphology using finite element methods”, Lecture Notes in Mechanical Engineering Springer, manuscript number ICME1135. (accepted), 2019
135
D. Dutta Majumdar, D. P. Mondal, A. K. Jha, M. Ghosh and A. Roychoudhury, Fretting Wear Resistance of Titanium Foam Developed by Powder Metallurgy Route, Procedia Manufacturing 35C (2019) pp. 833-839., 2019
136
Raj, L Prince and Lee, JW and Myong, RS, Ice accretion and aerodynamic effects on a multi-element airfoil under SLD icing conditions, 85, 320--333, Aerospace Science and Technology, 2019
137
JK Biswas, S Banerjee, S Majumder, S Roy, S Saha, A Roy Chowdhury, EFFECT OF PEDICLE-SCREW FIXATION IN LUMBAR SPINE AT L3-L5 LEVEL: A FINITE ELEMENT STUDY, Journal of the Mississippi Academy of Sciences 63 (S1), 266-275, 2018
138
R Maity, S Majumder, A Roy Chowdhury, S Saha, Effect of plate geometry modifications to reduce stress shielding during healing stages for tibial fracture fixation, Journal of long-term effects of medical implants 28 (2), 2018
139
JK Biswas, M Rana, S Roy, S Majumder, SK Karmakar, A Roy Chowdhury, Effect of range of motion (ROM) for pedicle-screw fixation on lumbar spine with rigid and semi-rigid rod materials: A finite element study, IOP Conference Series: Materials Science and Engineering 402 (1), 012146, 2018
140
K Bhowmik, P Kumar, N Khutia, AR Chowdhury, Estimation of Effective Directional Strength of Single Walled Wavy CNT Reinforced Nanocomposite, IOP Conference Series: Materials Science and Engineering 338 (1), 012016, 2018
141
K Bhowmik, P Kumar, N Khutia, AR Chowdhury, Evaluation of Directional Strength of SWCNT Reinforced Nanocomposites: A Finite Element Study, Materials Today: Proceedings 5 (9), 20528-20534, 2018
142
S Sarkar, S Majumder, A Roy Chowdhury, Factors affecting diffuse axonal injury under blunt impact and proposal for a head injury criteria: A finite element analysis, Critical Reviews™ in Biomedical Engineering; vol 46 (4), 2018
143
JC Misra, B Mallick, A Sinha, AR Chowdhury, Impact of Cattaneo-Christov heat flux on electroosmotic transport of third-order fluids in a magnetic environment, The European Physical Journal Plus 133 (5), 195, 2018
144
K Bhowmik, T Nandy, P Kumar, N Khutia, AR Chowdhury, Prediction of Directional Young's Modulus of Particulate Reinforced MMC using Finite Element Methods, IOP Conference Series: Materials Science and Engineering 377 (1), 012057, 2018
145
DD Majumdar, DP Mondal, M Ghosh, A Roychoudhury, Wear Behavior of Cenosphere Dispersed Titanium Composite Foam Developed by Powder Metallurgy Route, Materials Science Forum 941, 2047-2053, 2018
146
Biswas, J.K., Dey, S., Karmakar, S.K., RoyChowdhury, A., Datta, A.;, "Design of Patient Specific Spinal Implant (Pedicle Screw Fixation) using FE Analysis and Soft Computing Techniques"., Current Medical Imaging Reviews Vol. 14 (2018), 2018
147
JC Misra, B Mallick, A Sinha, AR Chowdhury., Impact of Cattaneo-Christov heat flux on electroosmotic transport of third order fluids in a magnetic environment., Article in European Physical Journal Plus · May 2018, 2018
148
Sudipto Datta, Ankita Das, Pranabesh Sasmal, Sumant Bhutoria, Amit Roy Chowdhury, and Pallab Datta,, Alginate-poly(amino acid) extrusion printed scaffolds for tissue engineering applications, International Journal of Polymeric Materials and Polymeric Biomaterials, 2018,, 2018
149
D. Dutta Majumdar, A. Roy Chowdhury, M. Ghosh;, Titanium and its alloys for bio-implant applications;, IIM Metal News (ISSN: 0972-0480), Vol. 21, No.2, February 2018, pp 6-9., 2018
150
S Chatterjee, S Majumder, A Roy Chowdhury, S Pal, Problems with use of trans-tibial prosthesis, Journal of Medical Imaging and Health Informatics 6 (2), 269-284, 2018
151
A. Roy, A. Santra, R. Roy, Estimating seismic response under bidirectional shaking per uni-directional analysis: Identification of preferred angle of incidence, 106, 163-181, Soil Dynamics and Earthquake Engineering, 2018
152
D. Kar, R. Roy, Seismic behavior of RC bridge piers under bidirectional excitations: Implications of site effects, 22(2), 303-331, Journal of Earthquake Engineering, 2018
153
P. Kumar, P.C. Joshi, R. Kumar, and S. Biswas, Catalytic Effects of Cu-Co* on the Thermal Decomposition of AN and AN/KDN Based Green Oxidizer and Propellant Samples, 14(3), 250-260, Defence Technology, Elsevier Publications, 2018
154
P. Kumar, An Overview on Properties, Thermal Decomposition, and Combustion Behavior of ADN and ADN Based Composite Solid Propellants, 14(6), 661-673, Defence Technology, Elsevier Publications, 2018
155
P K Raushan, S K Singh, K Debnath, Grid generated turbulence under the rigid boundary influence, 182, 252--261, Journal of Wind Engineering and Industrial Aerodynamics, Elsevier, 2018
156
S K Singh, P K Raushan, P Kuma, K Debnath, Turbulent characteristics of pulsating flow over hydraulically smooth surface, 68, 10--19, European Journal of Mechanics-B/Fluids, Elsevier, 2018
157
S Roy, K Debnath, B S Mazumder, Distribution of turbulent eddies behind a monopile for vortex lock-on condition due to wave current combined flow, 131, 70--87, Coastal Engineering, Elsevier, 2018
158
S K Singh, P K Raushan, K Debnath, Combined effect of wave and current in rough bed free surface flow, 160, 20--32, Ocean Engineering, Elsevier, 2018
159
N. Nandi, A. Roychowdhury and S. C. Dutta, Effect of seepage on change in stress distribution scenario in static and seismic behaviour of earthen dams, 23(1), 121-136, Journal of Applied Mechanics and Engineering (IJAME), 2018
160
K Barman, S Roy, K Debnath, Wave-current generated turbulence over hemisphere bottom roughness, 202, 1--17, Estuarine, Coastal and Shelf Science, Elsevier, 2018
161
S Roy, S S Samantaray, K Debnath, Study of turbulent eddies for wave against current, 150, 176--193, Ocean Engineering, Elsevier, 2018
162
P K Raushan, S K Singh, K Debnath, M Mukherjee, B S Mazumder, Distribution of turbulent energy in combined wave current flow, 167, 310--316, Ocean Engineering, Elsevier, 2018
163
S Chaudhuri, S K Singh, K Debnath, M K Manik, Pier scour within long contraction in cohesive sediment bed, 18, 417--441, Environmental Fluid Mechanics, Springer, 2018
164
J Li, S S Li, Discussion of “Turbulence over cube-mounted rough bed using spatiotemporal averaging approach”, 46, 67--68, Canadian Journal of Civil Engineering, Canadian Science Publishing, 2018
165
S Roy, K Debnath, B S Mazumder, Turbulence statistics and distribution of turbulent eddies for jet flow and rigid surface interaction., 70 (1), 55-88, Archives of Mechanics, 2018
166
S K Singh, P K Raushan, K Debnath, M Mukherjee, B S Mazumder, Turbulence characteristics in boundary layers over a regular array of cubical roughness, 27(4), 404-417, ISH Journal of Hydraulic Engineering, Taylor &Francis, 2018
167
S K Singh, K Debnath, B S Mazumder, Reply to the discussion by Li and Li on “Turbulence over cube-mounted rough bed using spatiotemporal averaging approach”, 46, 69--71, Canadian Journal of Civil Engineering, Canadian Science Publishing, 2018
168
K Barman, K Debnath, Koustuv, B S Mazumder, Turbulence over a pair of submerged hemispheres in presence of surface waves and following current, 140 (3), 031104, Journal of Offshore Mechanics and Arctic Engineering, ASME, 2018
169
K Barman, S Roy, K Debnath, Effect of relative spacing on wake turbulence under wave-current flow, 45(6), 489--503, Canadian Journal of Civil Engineering, Canadian Science Publishing, 2018
170
S K Singh, V K Pal, K Debnath, A numerical investigation of slip flow through circular micro-channel, 45(5), International Journal of Fluid Mechanics Research, Begell House, 2018
171
Sarkar S, Majumder S, Roychowdhury A, Factors affecting diffuse axonal injury under blunt impact and proposal for a head injury criteria: A finite element analysis, 46(4), 289-310, Critical Reviews™ in Biomedical Engineering (Beggel House), 2018
172
Maity R, Majumder S, Roychowdhury A, Saha S, Effect of plate geometry modifications to reduce stress shielding during healing stages for tibial fracture fixation, 28(2), 131-140, Journal of Long-Term Effects of Medical Implants (Begell House), 2018
173
Biswas JK, Roy S, Majumder S, Karmakar SK, Saha S, Roychowdhury A, Artificial intervertebral disc replacement to provide dynamic stability to the lumbar spine: A finite element study, 28(2), 101-109, Journal of Long-Term Effects of Medical Implants (Begell House), 2018
174
Biswas JK, Rana M, Majumder S, Karmakar SK, Roychowdhury A, Effect of two-level pedicle-screw fixation with different rod materials on lumbar spine: A finite element study, 23(2), 258-265, Journal of Orthopaedic Science (Elsevier Science), 2018
175
Biswas JK, Banerjee S, Majumder S, Roy S, Saha S, Roychowdhury A, Effect of pedicle-screw fixation in lumbar spine at L3-L5 level: A finite element study, 63(S1), 266-274, Journal of the Mississippi Academy of Sciences (MAS), 2018
176
Roy S., Dey Swati, Khutia N., Roy Chowdhury A., Datta S., Design of patient specific dental implant using FE analysis and computational intelligence techniques, 65, 272–279, Applied Soft Computing, Elsevier, 2018
177
K. Kalita, P. Nasre, P. Dey and S. Haldar, Metamodel based multi-objective design optimization of laminated composite plates, V-67, 301-310, Structural Engineering and Mechanics, 2018
178
Arpita Mondal, Salil Haldar and Chaitali Roy, Dynamic analysis of laminated composite shew plates with cutout, V-68, 639-, Structural Engineering and Mechanics, 2018
179
K. Kalita, S. Haldar, Natural Frequencies of Rectangular Plate with- and without- rotary inertia, Series C,99(5), 539-555, Journal of Institution of Engineers, 2018
180
Roy, S., Dey, S., Khutia, N., Chowdhury, A.R. and Datta, S., Design of patient specific dental implant using FE analysis and computational intelligence techniques., 65, 272-279, Applied Soft Computing, 2018
181
Biswas, J.K., Rana, M., Majumder, S., Karmakar, S.K. and Roychowdhury, A., Effect of two-level pedicle-screw fixation with different rod materials on lumbar spine: A finite element study, 23(2), 258-265, Journal of Orthopaedic Science, 2018
182
S Datta, R Sarkar, V Vyas, S Bhutoria, A Barui, AR Chowdhury, P Datta, Alginate-honey bioinks with improved cell responses for applications as bioprinted tissue engineered constructs, Journal of Materials Research 33 (14), 2029-2039, 2018
183
JK Biswas, S Roy, S Majumder, SK Karmakar, S Saha, A Roy Chowdhury, Artificial Intervertebral Disc Replacement to Provide Dynamic Stability to the Lumbar Spine: A Finite Element Study, Journal of long-term effects of medical implants 28 (2), 2018
184
S Datta, R Barua, R Sarkar, A Barui, AR Chowdhury, P Datta, Design and development of alginate: Poly-l-lysine scaffolds by 3D bio printing and studying their mechanical, structural and cell viability properties., IOP Conference Series: Materials Science and Engineering 402 (1), 012113, 2018
185
L. Prince Raj and S. Singh and A. Karchani and R.S. Myong, A super-parallel mixed explicit discontinuous Galerkin method for the second-order Boltzmann-based constitutive models of rarefied and microscale gases, 157, 146-163, Computers & Fluids, 2017
186
A. Roy, G. Bhattacharya, R. Roy, Maximum credible damage of RC bridge piers under bidirectional seismic excitation for all incidence angles, 152, 251-273, Engineering Structures, 2017
187
P. Kumar, P.C. Joshi, and R. Kumar, Thermal decomposition and kinetics studies of AN, KDN and their mixtures with and without catalysts, 14(1), 184-200, Central European Journal of Energetic Materials, University of Warsaw, 2017
188
S Roy, K Debnath, B S Mazumder, Distribution of eddy scales for wave current combined flow, 63, 170--183, Applied Ocean Research, Elsevier, 2017
189
S K Singh, K Debnath, B S Mazumder, Turbulence over cube-mounted rough bed using spatiotemporal averaging approach, 44 (7), 504--517, Canadian Journal of Civil Engineering, Canadian Science Publishing, 2017
190
S K Singh, K Debnath, Turbulence Characteristics of Flow Under Combined Wave--Current Motion, 139 (2), 021102, Journal of Offshore Mechanics and Arctic Engineering, ASME, 2017
191
S K Singh, P K Raushan, K Debnath, B S Mazumder, Turbulent oscillatory flow along unidirectional current over square ribs, 45, 248--262, Canadian Journal of Civil Engineering, Canadian Science Publishing, 2017
192
S Roy, K Debnath, Vortex-Synchronization Control around a Partially Submerged Cylinder due to Wave-Following Current, 143, 06017003, Journal of Waterway, Port, Coastal, and Ocean Engineering, ASCE, 2017
193
S K Singh, K Debnath, Turbulent flow characteristics in a rectangular channel under the influence of cube-mounted rough bed, 23 (2), 167--176, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2017
194
K Barman, K Debnath, B S Mazumder, Higher-order turbulence statistics of wave--current flow over a submerged hemisphere, 49 (2), 025504, Fluid Dynamics Research, IOP Science, 2017
195
S. K. Saha and N. Nandi, Change in Flow Separation and Velocity Distribution Due to Effect of Guide Vane Installed in a 900 Pipe Bend’, 21(2), 353–361, Mechanics and Mechanical Engineering Lodz University of Technology, 2017
196
K Barman, K Debnath, B S Mazumder, Turbulence study over submerged obstacles on waves and currents combined flow, 23(3), 246--257, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2017
197
K Barman, K Debnath, Turbulent wakes behind bed-mounted hemispheres in co-existing surface wave, 44(2), 169-183, International Journal of Fluid Mechanics Research, Begell House, 2017
198
Sahoo A, Majumder S, Roychowdhury A, Car occupant response: finite element analysis of knee-thigh-hip complex under frontal impact, 9(4), 311-327, International Journal of Vehicle Safety (Inderscience), 2017
199
Sahoo A, Majumder S, Roychowdhury A, Automobile frontal impact on knee-thigh-hip complex, 1(5), 116-125, Journal of Mechanical Engineering and Biomechanics (Rational Publication), 2017
200
Kalita and S. Haldar, Eigenfrequencies of simply supported taper plates with cut outs, Vol 63, 103-113, Structural Engineering and Mechanics, 2017
201
Arpita Mandal, Chaitali Roy and Salil Haldar, Free vibration analysis of laminated composite skew plates with cut out, 87(9), 1511-1523, Archive of Applied Mechanics, 2017
202
Roy, S., Das, M., Chakraborty, P., Biswas, J.K., Chatterjee, S., Khutia, N., Saha, S. and RoyChowdhury, A., Optimal selection of dental implant for different bone conditions based on the mechanical response., 19(2), 11-20, Acta of bioengineering and biomechanics, 2017
203
Sahoo, A., Majumder, S. and Roychowdhury, A., Car occupant response: finite element analysis of knee-thigh-hip complex under frontal impact., 9(4), 311-327, International Journal of Vehicle Safety, 2017
204
Paul, S., Pal, A., Choudhury, A.R., Bodhak, S., Balla, V.K., Sinha, A. and Das, M., Effect of trace elements on the sintering effect of fish scale derived hydroxyapatite and its bioactivity, 43(17), 15678-15684, Ceramics International, 2017
205
Pal, A., Maity, S., Chabri, S., Bera, S., Chowdhury, A.R., Das, M. and Sinha, A., Mechanochemical synthesis of nanocrystalline hydroxyapatite from Mercenaria clam shells and phosphoric acid., 3(1), 015010, Biomedical Physics & Engineering Express, 2017
206
Pal, Anindya, Sudeep Paul, Amit Roy Choudhury, Vamsi Krishna Balla, Mitun Das, and Arijit Sinha, Synthesis of hydroxyapatite from Lates calcarifer fish bone for biomedical applications., 203, 89-92, Materials Letters, 2017
207
Raj, LP and Myong, RS, Computational Analysis of An Electro-Thermal Ice Protection System in Atmospheric Icing Conditions, 21, 1--9, Journal of Computational Fluids Engineering, 2016
208
A. K. Banerjee, D. Pramanik, R. Roy, Seismic structural fragilities: Proposals for improved methodology per spectral matching of accelerogram, 111, 538-551, Engineering Structures, 2016
209
A. Sengupta, L. Quadery, S. Sarkar, R. Roy, Influence of bidirectional near-fault excitations on RC bridge piers, 21(7), 04016034:1-30, Journal of Bridge Engineering, 2016
210
Sandipan Roy, Debojyoti Panda , Arunava Deb, Sauradeep Bhowmick, Niloy Khutia, Amit Roy Chowdhury ;, Optimization of Effective Modulus and stress concentration for different Pore geometries of Titanium Materials., The Indian journal of Biomechanics., 2016
211
S. Chakroborty, R. Roy, Role of ground motion characteristics on inelastic seismic response of irregular structures, 22(1), B4015007:1-16, Journal of Architectural Engineering, 2016
212
Kumar, P., Banerjee, M.K., Hodgson, P. and Roy Chowdhury, A.;, Dynamic Re-Crystallization of Low Carbon Steel in Plain Strain Condition., International Journal of Mechanical Engineering and Robotics Research, 5(2), p.160., 2016
213
S. Chakroborty, R. Roy, Seismic behavior of horizontally irregular structures: Current wisdom and challenges ahead, 68(6), 060802:1-17, Applied Mechanics Reviews, 2016
214
Kumar, P. and Roy Chowdhury, A.;, Precipitation of Copper and Grain Refinement in Low Carbon Steel in Hot Rolling., Journal of Materials Science & Surface Engineering. 5:428-431., 2016
215
Kumar, P. and Roy Chowdhury, A.;, A Brief Review on Grain Refinement in Steel Through Dynamic Strain Induced Transformation., Journal of Materials Science & Surface Engineering. 4: 436-443., 2016
216
D. Dutta Majumdar, D. P. Mondal, A. Roy Chowdhury, H. Rao, and J. Dutta Majumdar;, Studies on Titanium Cenosphere Composite Developed by Powder Metallurgy Route;, Advanced Materials Research (ISSN print 1022-6680), Vol. 1139, 2016, pp 55-58., 2016
217
D. Pramanik, A. K. Banerjee, R. Roy, Implications of bi-directional interaction on seismic fragilities of structures, 5(2), 101-126, Coupled Systems Mechanics, 2016
218
P. Kumar, P.C. Joshi, and R. Kumar, Thermal decomposition and combustion studies of catalyzed AN/KDN based solid propellants, 166, 316-332, Combustion and Flame, Elsevier Publications, 2016
219
K Barman, K Debnath, B S Mazumder, Turbulence between two inline hemispherical obstacles under wave--current interactions, 88, 32--52, Advances in Water Resources, Elsevier, 2016
220
S K Singh, K Debnath, Combined effects of wave and current in free surface turbulent flow, 127, 170--189, Ocean Engineering, Elsevier, 2016
221
S K Singh, K Debnath, B S Mazumder, Spatially-averaged turbulent flow over cubical roughness in wave-current co-existing environment, 114, 77--85, Coastal Engineering, Elsevier, 2016
222
S K Singh, K Debnath, B S Mazumder, Changes in turbulent flow structure over rough-bed under combined wave-current motions, 22 (3), 305--313, ISH Journal of Hydraulic Engineering, Taylor& Francis, 2016
223
S. K. Saha and N. Nandi, Numerical study about the change in flow separation and velocity distribution in 900 pipe bend with/without guide vane conditions’, 8(4), 681-689, International Journal of Technology (IJTech, ISSN-2086-9614), 2016
224
P. Dutta, S. K. Saha, N. Nandi and N. Pal, Numerical study on flow separation in 900 pipe bend under high Reynolds number by k-? modeling, 904-910, Engineering Science and Technology, an international journal (Elsevier), 2016
225
P., Dutta & Nandi, N, Effect of bend curvature on velocity & pressure distribution from straight to a 90° pipe bend - a numerical study, 2(4), 103-108, REST Journal on Emerging trends in modeling and manufacturing (ISSN - 2455-4537), 2016
226
Chatterjee S, Majumder S, Roychowdhury A, Pal S, Review: Problems with use of trans-tibial prosthesis, 6(2), 269-284, Journal of Medical Imaging and Health Informatics (American Scientific), 2016
227
Roy S., Das M., Khutia N., Das D., Balla K V., Roy Chowdhury A., Understanding compressive deformation behavior of porous Ti using Finite Element Analysis, 64, 436-443, Materials Science and Engineering C, Elsevier, 2016
228
Roy S., Das M., Chakraborty P., Biswas J., Chatterjee S., Khutia N., Saha S., RoyChowdhury A., Optimal selection of dental implant for different bone conditions based on the mechanical response, 19 (2), 11-20, Acta of Bioengineering and Biomechanics, 2016
229
Paul P., Das P.K. , Sarkar P., Simplified method to evaluate moment capacity ratio for a symmetric multi-storeyed RC frame under seismic loading, 4 (3), 86-92, International Journal of Earthquake Engineering and Hazard Mitigation (IREHM), 2016
230
Paul P., Das P.K. , Sarkar P., Spatial Distribution of Shear Forces in Beam-To-Column Joints of Multi-Storeyed RC Framed Building Under Seismic Loading, 4 (2), 56-63, International Journal of Earthquake Engineering and Hazard Mitigation (IREHM), 2016
231
P. Dey, S. Haldar, D. Sengupta and A. H. Sheikh, An efficient plate element for the vibration of composite plates, 40 (9-10), 5589-5604, Applied Mathematical Modelling, 2016
232
K. Kalita and S. Haldar, Free vibration analysis of rectangular plates with central cutout, Vol. 3, Cogent Engineering, 2016
233
K. Kalita, M. Ramachandran, P. Raichurkar, S. Mokal and S. Haldar, Free vibration analysis of laminated composites by a nine node isoparametric plate bending element, 25(5), 108, Advanced Composite Letters, 2016
234
K. Kalita,, I. Shivakoti, R. K. Ghadai. And S. Haldar, Rotary inertia effect in isotropic plates Part I: uniform thickness, 13(2), 68-74, Romanian journal of acoustic and vibration, 2016
235
K. Kalita,, I. Shivakoti, R. K. Ghadai. And S. Haldar, Rotary inertia effect in isotropic plates Part II: Taper thickness, 13(2), 75-80, Romanian journal of acoustic and vibration, 2016
236
K. Kalita, S. Haldar, 6. “Natural Frequencies of Rectangular Plate with- and without- rotary inertia, Series C, 1- 17, Journal of Institution of Engineers, 2016
237
Roy, S., Khutia, N., Das, D., Das, M., Balla, V.K., Bandyopadhyay, A. and Chowdhury, A.R., Understanding compressive deformation behavior of porous Ti using finite element analysis., 64, 436-443, Materials Science and Engineering: C, 2016
238
Majumder, S., Chowdhury, A.R. and Saha, S., Electromagnetic Response of Bones Adjacent to the Dental Root Before and After Dental Implantation., 26(4), 295-302, Journal of long-term effects of medical implants, 2016
239
PS Banerjee, R Pradhan, A Roy Chowdhury, SK Karmakar, Investigation of stresses developed in natural and implanted human cervical spine by finite element method, Journal of Advanced Medical and Dental Sciences Research. 3 (1), 9, 2015
240
S K Singh, K Debnath, B S Mazumder, Turbulence statistics of wave-current flow over a submerged cube, 142, 04015027, Journal of waterway, Port, coastal, and Ocean Engineering, ASCE, 2015
241
Debashis Pal and Suman Chakraborty, Fluid flow induced by periodic temperature oscillation over a flat plate: Comparisons with the classical Stokes problems, 27, 053601, Physics of Fluids, 2015
242
Debasis Mondal, Debashis Pal and Chirasree RoyChaudhuri, Real Time Sensing of Epithelial Cell-Cell and Cell-Substrate Interactions by Impedance Spectroscopy on Porous Substrates, 118, 044701, Journal of Applied Physics, 2015
243
Subhamita Chakraborty, Shubhabrata Datta, Sujay Kumar Mukherjea, Partha Protim Chattopadhyay, 1. “Cooling Profile Analysis of Hot Strip Coil using Finite Volume Method”, Vols. 789-790 (2015), Applied Mechanics and Materials, 2015
244
P. Dutta & N. Nandi, Effect of Reynolds Number and Curvature Ratio on Single Phase Turbulent Flow in Pipe Bends, 19(1), 5–16, International Journal Mechanics and Mechanical Engineering Lodz University of Technology., 2015
245
P. Dutta & N. Nandi, Study on pressure drop characteristics of single phase turbulent flow in pipe bend for high Reynolds number, 10(5), 2221-2226., ARPN Journal of Engineering and Applied Sciences MARCH (ISSN 1819-6608), 2015
246
P. Dutta, S. Saha & N. Nandi, Computational study of turbulent flow in pipe bends, 10(11), 10128-10133, International Journal of Applied Engineering Research (ISSN 0973-4562), 2015
247
N. Nandi, S. C. Dutta and A. Roychowdhury, Change in stress distribution scenario within the earthen dams due to the effect of soil-structure interaction and hydrodynamic forces under static and seismic loading conditions, XXVI(1), 05-50, International Journal of Dam Engineering, UK, 2015
248
Talukdar RG, Das M, Majumder S, Roychowdhury A, Optimization of solid UHMWPE with porosity as an cervical disc implant, 10(S11), 10511-10515, International Journal of Applied Engineering Research (Research India), 2015
249
Das M, Talukdar RG, Bhowmik K, Roy S, Majumder S, Comparison of interface stress-strain analysis of molar teeth with solid and porous dental implant, 10(S11), 10502-10506, International Journal of Applied Engineering Research (Research India), 2015
250
Khutia N., Dey P. P., Hassan T., An improved nonproportional cyclic plasticity model for multiaxial low-cycle fatigue and ratcheting responses of 304 stainless steel, 91, 12-25, Mechanics of Materials, Elsevier, 2015
251
Das M, Talukdar RG, Bhowmik K, Roy S, Majumder S, Comparison of interface stress-strain analysis of molar teeth with solid and porous dental implant, 10, 10502–10506, International Journal of Applied Engineering Research, 2015
252
K. Kalita and S. Haldar, 1. . ‘ Parametric study on thick plate vibration using FSDT, 19(2), 81-90, Mechanics and Mechanical Engineering, 2015
253
K. Kalita, D. Shine and S. Haldar, Analysis on transverse bending of rectangular plates, 2(4), 2146-2154, Materials Today; Proceedings, 2015
254
Talukdar R.G., Das M., Majumder S., Choudhury, A.R., Optimization of Solid UHMWPE with porosity as an cervical disc implant., 10(S11), 10511–10515, International Journal of Applied Engineering Research, 2015
255
R. Roy, P. Thakur, S. Chakroborty, Scaling of ground motions and its implications to plan-asymmetric structures, 57, 46-67, Soil Dynamics and Earthquake Engineering, 2014
256
R. Roy, P. Thakur, S. Chakroborty, Spectral matching of real ground motions: Applications to horizontally irregular systems in elastic range, 17(11), 1623-1638, Advances in Structural Engineering, 2014
257
MS Kaiser, S Datta, A Roy Chowdhury, MK Banerjee, Effect of prior cold work on tensile properties of Al–6Mg alloy with minor scandium additions, Canadian Metallurgical Quarterly. 53 (4), 486-493, 2014
258
JK Biswas, S Karmakar, S Majumder, PS Banerjee, S Saha, ..., Optimization of spinal implant screw for lower vertebra through finite element studies, Journal of long-term effects of medical implants 24 (2-3), 2014
259
S Roy, D Panda, N Khutia, AR Chowdhury, Pore geometry optimization of titanium (Ti6Al4V) alloy, for its application in the fabrication of customized hip implants, International journal of biomaterials Vol. 4 page 445, 2014
260
Aditya Bandopadhyay, Uddipta Ghosh, Debashis Pal, Kaustav Chaudhury and Suman Chakraborty, Electrokinetic Maneuvering of Bubble-Driven Inertial Micro-Pumping Systems, 5(1), 13 - 21, International Journal of Micro-Nano Scale Transport, 2014
261
I Datta, K Debnath, Volume of fluid model of open channel contraction, 95, 251--259, Journal of The Institution of Engineers (India): Series C, Springer, 2014
262
K Debnath, S Chaudhuri, M K Manik, Local scour around abutment in clay/sand-mixed cohesive sediment bed, 20 (1), 46--64, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2014
263
Biswas JK, Karmakar SK, Majumder S, Saha S, Roychowdhury A, Optimization of spinal implant screw for lower vertebra through finite element studies, 24(2-3), 99-108, Journal of Long-Term Effects of Medical Implants (Begell House), 2014
264
Dipankar Chatterjee, Pabitra Halder, MHD Mixed Convective Transport in a Square Enclosure with Two Rotating Circular Cylinders, Numerical Heat Transfer Part A, 2014
265
Dipankar Chatterjee, Bittagopal Mondal, Pabitra Halder, Hydromagnetic Mixed Convective Transport in a Vertical Lid-Driven Cavity including a Heat Conducting Rotating Circular Cylinder, 65(1), 48-65, Numerical Heat Transfer Applications, 2014
266
Roy S., Panda D., Khutia N., RoyChowdhury A., Pore geometry optimization of titanium (Ti6Al4V) alloy, for its application in the fabrication of customized hip implants, 12, 1-13, International Journal of Biomaterials, Hindawi Publishing Corporation, 2014
267
Khutia N., Dey P. P., Sivaprasad S., Tarafder S., Development of new cyclic plasticity model for 304LN stainless steel through simulation and experimental investigation, 78, 85-101, Mechanics of Materials, Elsevier, 2014
268
Khutia N., and Dey, P.P., Material parameter optimisation of Ohno-Wang kinematic hardening model using multi objective genetic algorithm, 6(1), 50-74, Computational Materials Science and Surface Engineering, Inderscience, 2014
269
Bhaumik S. , Das P.K., Effect of Asymmetric Community Structures under Near-fault Ground Motion, 1 (3), 7-11, International Journal of Advancements in Mechanical and Aeronautical Engineering (IJAMAE), 2014
270
Kalita, K., and S. Halder, Static Analysis of transversely loaded Isotropic and Orthotropic Plates with Central Cutout, Series C: 95(4),, 347-358, Journal of The Institution of Engineers (India), 2014
271
Roy, R. and Mahato, S, Equivalent lateral force method for buildings with setback: Adequacy in elastic range, 4, 6, Earthquakes and Structures, Techno Press, 2013
272
MS Kaiser, S Datta, PP Bandyopadhyay, A Guha, A Roy Chowdhury, ..., Effect of grain refinement through minor additions of scandium and zirconium on the machinability of Al–Mg alloys, Journal of The Institution of Engineers (India): Series D 94 (1), 17-24, 2013
273
S Majumder, A Roy Chowdhury, S Pal, Hip fracture and anthropometric variations: dominance among trochanteric soft tissue thickness, body height and body weight during sideways fall, Clinical biomechanics 28 (9-10), 1034-1040, 2013
274
PK Maji, A Roy Chowdhury, D Datta, Minimizing Stress Shielding Effect of Femoral Stem—A Review, Journal of Medical Imaging and Health Informatics 3 (2), 171-178, 2013
275
PS Banerjee, A Roychoudhury, SK Karmakar, Morphological and Kinematic aspects of Human Spine–As design inputs for developing Spinal Implants, J. Spine 2 (4), 2-5, 2013
276
J. Bhowmik, D. Das, S.K. Ghosh, Aerodynamic modelling of flapping flight using lifting line theory, 1 (1), 36–61, International Journal of Intelligent Unmanned Systems, 2013
277
S Chaudhuri, K Debnath, Observations on initiation of pier scour and equilibrium scour hole profiles in cohesive Sediments, 19 (1), 27--37, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2013
278
P. Sinha, K. Sarkar, B. Pandey & N. Nandi, Experimental study on vortex motion, 40(6), 512-519, International Journal of Fluid Mechanics Research, ISSN 1064-2277, 2013
279
P. Sinha, K. Sarkar, B. Pandey & N. Nandi, On a few aspects of vortex motion, 2(2), 11-16, International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME, ISSN: 2319 – 3182), 2013
280
Majumder S, Roychowdhury A, Pal S, Hip fracture and anthropometric variations: Dominance among trochanteric soft tissue thickness body height and body weight during sideways fall, 28(9-10), 1034-1040, Clinical Biomechanics (Elsevier Science), 2013
281
Chatterjee S, Ghosh UB, Majumder S, Roychowdhury A, Pal S, Customization of design for hip implants, 4(1), 58-62, Indian Journal of Biomechanics (ISB), 2013
282
Pabitra Halder, Sudipta De, K.P. Sinhamahapatra, N. Singh, Numerical Simulation of Shock-Vortex Interaction in Schardin's Problem, 23(5), Shock Waves, 2013
283
Dipankar Chatterjee, Pabitra Halder, Sinchan Mondal, Supratim Bhattacharjee, Magnetoconvective transport in a vertical lid-driven cavity including a heat conducting square cylinder with Joule heating, 64, 1050-1071, Numerical Heat Transfer Part A, 2013
284
Dipankar Chatterjee, Bittagopal Mondal, Pabitra Halder, Unsteady Forced Convection Heat Transfer over Semicircular Cylinder at Low Reynolds Numbers, 63, 411-429, Numerical Heat Transfer Part A, 2013
285
Khutia N., Dey P.P., Paul Surajit, Tarafder S., Development of Non Masing Characteristic Model for LCF and Ratcheting Fatigue Simulation of SA333 C-Mn Steel, 65, 88-102, Mechanics of Materials, Elsevier, 2013
286
Roy, R. and Chakrovorty, S., Seismic demand of plan-asymmetric structures: A re-visit, 4(1), 99-117., Earthquake Engineering and Engineering Vibration, 2013
287
Balu, R and Raj, L Prince, Analysis of Heat Transfer in Hypersonic Flow over Re-Entry Configurations, 3, 1--10, International Journal of Advances in Thermal Sciences and Engineering, 2012
288
JK Biswas, SK Karmakar, S Majumder, A Roy Chowdhury, A finite element study of spinal implant (pedicle screw) design for lumbar (L3–L5) vertebra, Indian J. Biomech 3, 50-60, 2012
289
PS Banerjee, A Roychoudhury, SK Karmakar, Biomechanical Remedies for Degeneration of Cervical Spine—A Review of Literature, Journal of Medical Imaging and Health Informatics 2 (4), 343-351, 2012
290
PK Maji, A Roy Chowdhury, D Datta, Investigating the morphology of the proximal femur of the Indian population towards designing more suitable THR implants, Journal of long-term effects of medical implants 22 (1), 2012
291
PS Banerjee, A Roychoudhury, SK Karmakar, Morphometric analysis of the cervical spine of Indian population by using computerized tomography, Journal of Medical & Allied Sciences Vol(2), Issue-2, pp. 66-76., 2012
292
K Debnath, M K Manik, B S Mazumder, Turbulence statistics of flow over scoured cohesive sediment bed around circular cylinder, 41, 18--28, Advances in Water Resources, Elsevier, 2012
293
K Debnath, S Chaudhuri, Local scour around non-circular piers in clay--sand mixed cohesive sediment beds, 151, 1--14, Engineering Geology, Elsevier, 2012
294
Debashis Pal and Suman Chakraborty, Spatially uniform microflows induced by thermoviscous expansion along a traveling temperature wave: Analogies with electro-osmotic transport, 86, 016321, Physical Review E, 2012
295
P. Chatterjee and N. Nandi, Study of unsteady laminar fluid flow past a square cylinder in viscous media, 4(3), 105-110, International Journal of Fluids Engineering (ISSN 09743138), 2012
296
Biswas JK, Karmakar SK, Majumder S, Roychowdhury A, A finite element study of spinal implant (pedicle screw) design for lumbar (L3-L5) vertebra, 3(1-2), 50-60, Indian Journal of Biomechanics (ISB), 2012
297
Mandal, B., Roy, R. and Dutta, S. C, Lateral capacity of piles in layered soil: A simple approach, 44(5), 571-584, Structural Engineering and Mechanics, Techno Press, 2012
298
Dutta, S. C. and Roy, R., Performance of seismically designed buildings under blast loadings, 36, ,. C2, 149-166., Iranian Journal of Science and Technology, Transaction B, Engineering,, 2012
299
AR Chowdhury, A Kashi, S Saha, A comparison of stress distributions for different surgical procedures, screw dimensions and orientations for a Temporomandibular joint implant, Journal of Biomechanics 44 (14), 2584-2587, 2011
300
K Debnath, S Chaudhuri, Effect of suspended sediment concentration on local scour around cylinder for clay--sand mixed sediment beds, 117, 236--245, Engineering Geology, Elsevier, 2011
301
Debashis Pal and Suman Chakraborty, An Analytical Approach to the Effect of Finite-sized End Reservoirs on Electroosmotic Transport through Narrow Confinements, 32, 638-645, Electrophoresis, 2011
302
K Debnath, S Chaudhuri, Closure to “Bridge Pier Scour in Clay-Sand Mixed Sediments at Near-Threshold Velocity for Sand” by Koustuv Debnath and Susanta Chaudhuri, 137 (10), 1306--1307, Journal of Hydraulic Engineering, ASCE, 2011
303
Debnath, K., and Chaudhury, S., Field Measurement and Formulations of Cohesive Sediment Erosion: A Review, 91, 7-15, Journal of the Institution of Engineers (Environmental Engineering Section), 2011
304
Pabitra Halder, K.P. Sinhamahapatra, N. Singh, Numerical Investigations of Supersonic Wake Region of Wedge Using AUSM+ on Unstructured Grid, 7 (11), 46-68, International Journal of Applied Mathematics and Mechanics, 2011
305
S. Haldar and A. H. Sheikh, Bending analysis of composite folded plates by finite element method, Vol. 47, 477-485, Finite Element in Analysis and Design, 2011
306
S. Haldar and A. Majumder, ‘Free vibration thick/thin skewed tapered cylindrical shell panels, vol. 16, Int. J. of Applied mechanics and engineering, 2011
307
N Nandi, S Chandra Dutta, A Roy Chowdhury, Explanation of seismic failure possibilities through dynamic and response analysis of earthen dams, Dam Engineering 21 (1), 45, 2010
308
A Kashi, AR Chowdhury, S Saha, Finite element analysis of a TMJ implant, Journal of dental research 89 (3), 241-245, 2010
309
Roychowdhury, A., Kashi, A., Saha, S.,, Patient specific optimization of TMJ Implant., Journal of Biomechanics Vol. 44(3) pp. 241-247,, 2010
310
K Debnath, S Chaudhuri, Laboratory experiments on local scour around cylinder for clay and clay--sand mixed beds, 111(1-4), 51--61, Engineering Geology, Elsevier, 2010
311
K Debnath, S Chaudhuri, Bridge pier scour in clay-sand mixed sediments at near-threshold velocity for sand, 136(9), 597--609, Journal of Hydraulic Engineering, ASCE, 2010
312
K Debnath, S Chaudhuri, Cohesive sediment erosion threshold: A review, 16 (1), 36--56, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2010
313
N. Nandi, S. C. Dutta and A. Roychowdhury, Explanation of seismic failure possibilities through dynamic and response analysis of earthen dams, XXI(1), 45-67, International journal of Dam Engineering, (ISSN 0-617-00563-X), 2010
314
Pabitra Halder, K.P. Sinhamahapatra, N. Singh, Type-VI and Type-V Shock-Shock Interactions on Double-Wedge Geometries Using AUSM+ on Unstructured Grid, 1 (4), 225-244, International Journal of Hypersonics, 2010
315
Das P.K. , Roy R., Seismic Behaviour of Torsionally Unbalanced Structures: Influence of Strength Dependent Stiffness, 3 (3SPL), 352-361, International Journal of Earth Sciences and Engineering, 2010
316
S. Haldar, A. Majumder, M. C. Manna, Bending of skew cylindrical shell panel, Article 17, Int. Journal of Computer Application, 2010
317
Das, P. K. and Roy, R., Seismic behaviour of torsionally unbalanced structures: Influence of strength dependent stiffness, 03, 03SPL, 352-361., International Journal of Earth Sciences and Engineering, 2010
318
Roy, R. and Dutta, S.C., Inelastic seismic demand of low-rise buildings with soil-flexibility, 45, . 4, 419-432., International Journal of Nonlinear Mechanics, 2010
319
A Roy Chowdhury, Application of the finite element method in orthopedic implant design, Journal of long-term effects of medical implants 19 (1), 2009
320
S Majumder, A Roy Chowdhury, S Pal, Effects of body configuration on pelvic injury in backward fall simulation using 3D finite element models of pelvis–femur–soft tissue complex, Journal of Biomechanics 42 (10), 1475-1482, 2009
321
AR Chowdhury, WT Hayes, VJ Rasquinha, Proposed Frequencies of a Vibrator Used for Implant Retrieval at the Time of Hip Joint Revision Surgery, Journal of long-term effects of medical implants 19 (2), 2009
322
Ghosh, U.B., Sengupta, D., Roy Chowdhury, A., Pal, S.,, Biomechanical Analysis of CT-Scan based Custom made Hip Prosthesis with an Optimal Hip Ball Using FEA,, Journal of long term effects of Medical Implants. Vol. 19(1): pp. 31-41., 2009
323
Majumder S, Roychowdhury A, Pal S, Effects of body configuration on pelvic injury in backward fall simulation using 3D finite element models of pelvis–femur–soft tissue complex, 42(10), 1475-1482, Journal of Biomechanics (Elsevier Science), 2009
324
Dutta, S. C.., Dutta, S. and Roy, R., Dynamic behaviour of R/C elevated tanks with soil-structure interaction, 31, 11, 2617-2629., Engineering Structures, Elsevier, 2009
325
Dutta, S. C., Raychowdhury, A., Chakrovorty, S. and Roy, R., Pushover analysis: Proposals for modification, 19, 9, 249-255., structural Engineering International, 2009
326
Dutta, S. C., Bhattacharya, K., and Roy, R., Effect of flexibility of foundations on its seismic stress distribution, 13, 1, 22-49., , Journal of Earthquake Engineering, Taylor and Francis,, 2009
327
A Deb, S Majumder, A Roy Chowdhury, Biomechanical Study of the Lumbar Spine With and Without Implant: A Finite Element Approach, Journal of Long-Term Effects of Medical Implants 18, 2008
328
MS Kaiser, S Datta, A Roy Chowdhury, MK Banerjee, Effect of scandium additions on the tensile properties of cast Al-6Mg alloys, Journal of materials engineering and performance 17 (6), 902, 2008
329
MS Kaiser, S Datta, A Roy Chowdhury, MK Banerjee, Effect of scandium on the microstructure and ageing behaviour of cast Al–6Mg alloy, Materials Characterization 59 (11), 1661-1666, 2008
330
S Majumder, A Roy Chowdhury, S Pal, Effects of trochanteric soft tissue thickness and hip impact velocity on hip fracture in sideways fall through 3D finite element simulations, Journal of biomechanics 41 (13), 2834-2842, 2008
331
S Majumder, A Roy Chowdhury, S Pal, Experimental validation of three-dimensional finite element model of pelvis-femur-soft tissue complex under side impact loading, International Journal of Vehicle Safety 3 (2), 117-134, 2008
332
S Majumder, A Roy Chowdhury, S Pal, Finite element study of side impact on pelvis with car door padding, International journal of vehicle safety 3 (4), 338-350, 2008
333
S Majumder, A Roy Chowdhury, S Pal, Three-dimensional finite element simulation of pelvic fracture during side impact with pelvis–femur–soft tissue complex, International Journal of Crashworthiness 13 (3), 313-329, 2008
334
V Nikora, S Larned, N Nikora, K Debnath, G Cooper, M Reid, Hydraulic resistance due to aquatic vegetation in small streams: field study, 134(9), 1326--1332, Journal of Hydraulic Engineering, ASCE, 2008
335
Sahoo, A., Ghosh, A., Roy Chowdhury A.,, Optimum angle of screw for fixing plate of fractured Femur., Indian Journal of Biomechanics (India), Vol. 2, pp. 24-29., 2008
336
Roy, T., Roy Chowdhury, A.,, Fatigue analysis of implanted dental screw., Indian Journal of Biomechanics (India), Vol. 1,. pp. 30- 36, 2008
337
Lenka, P.K., Roy Chowdhury, A., Kumar, R,., Design & Development of Lower Extremity Paediatric Prosthesis, a Requirement in Developing Countries., Journal of Physical Medicine & Rehabilitation Vol. 19(1): pp. 8-12., 2008
338
S Sarkar, A Roychowdhury, U Ghosh;, Prediction of subdural hematoma based on a 3D finite element human head model., International journal of vehicle safety Vol. 3 (3) page 276-294, 2008
339
K Debnath, A K Bhattacharya, B Mahato, A Chakrabarti, Volume of Fluid Model for Numerical Simulation of Vegetated Flows, 14 (2), 72--87, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2008
340
N. Nandi, Free vibration characteristics of earthen dams, 3(1), 43-59, International Journal of Mechanics and Solids (ISSN 0973-1881), 2008
341
Majumder S, Roychowdhury A, Pal S, Effects of trochanteric soft tissue thickness and hip impact velocity on hip fracture in sideways fall through 3D finite element simulations, 41(13), 2834-2842, Journal of Biomechanics (Elsevier Science), 2008
342
Majumder S, Roychowdhury A, Pal S, Finite element study of side impact on pelvis with car door padding, 3(4), 338-350, International Journal of Vehicle Safety (Inderscience), 2008
343
Banerjee T, Majumder S, Chakraborty JK, A three-dimensional finite element stress analysis of L4-L5 vertebra in a bending posture, 3(2), 182-193, International Journal of Vehicle Safety (Inderscience), 2008
344
Majumder S, Roychowdhury A, Pal S, Experimental validation of three-dimensional finite element model of pelvis-femur-soft tissue complex under side impact loading, 3(2), 117-134, International Journal of Vehicle Safety (Inderscience), 2008
345
Deb A, Majumder S, Roychowdhury A, Biomechanical study of the lumbar spine with and without implant: a finite element approach, 18(4), 257-261, Journal of Long-Term Effects of Medical Implants (Begell House), 2008
346
Majumder S, Roychowdhury A, Pal S, Three-dimensional finite element simulation of pelvic fracture during side impact with pelvis-femur-soft tissue complex, 13(3), 313-329, International Journal of Crashworthiness (Taylor & Francis), 2008
347
S. Halder, Free vibration of composite skewed cylindrical shell panel by finite element method, V-311, 9-19, Journal of Sound and Vibration, 2008
348
K Debnath, V Nikora, J Aberle, B Westrich, M Muste, Erosion of cohesive sediments: Resuspension, bed load, and erosion patterns from field experiments, 133(5), 508--520, Journal of Hydraulic Engineering, ASCE, 2007
349
MS Kaiser, S Datta, A Roy Chowdhury, MK Banerjee, Age hardening behavior of wrought Al–Mg–Sc alloy, Materials and Manufacturing Processes 23 (1), 74-81, 2007
350
K Debnath, V Nikora, A Elliott, Stream bank erosion: In situ flume tests, 133, 256--264, Journal of Irrigation and Drainage Engineering, ASCE, 2007
351
MS Kaiser, S Datta, A Roy Chowdhury, MK Banerjee, Ageing effect of ternary and quaternary additions on the fracture toughness behaviour of cast Al-Mg alloys, JOURNAL-INSTITUTION OF ENGINEERS INDIA PART MM METALLURGY AND MATERIAL …, 2007
352
S Majumder, A Roy Chowdhury, S Pal;, Simulation of hip fracture in sideways fall using a 3D finite element model of pelvis–femur–soft tissue complex with simplified representation of whole body, Medical engineering & physics 29 (10), 1167-1178, 2007
353
Lenka, P., Daripa, R., Kumar, R., Roy Chowdhury, A., Tibarewala, D.N.,, Stress Analysis of BK Prosthesis with Finite Element Method,., Indian Journal of Biomechanics, Vol.1, No.1, pp. 75-82., 2007
354
Sintu Singha, K. P. Sinhamahapatra, S. K. Mukherjea, 2. “Control of Vortex Shedding From a Bluff Body Using Imposed Magnetic Field”, 129, 2007(May), Journal of Fluids Engineering, 2007
355
Majumder S, Roychowdhury A, Pal S, Simulation of hip fracture in sideways fall using a 3D finite element model of pelvis–femur–soft tissue complex with simplified representation of whole body, 29(10), 1167-1178, Medical Engineering & Physics (Elsevier Science), 2007
356
Dutta S. C., Roy R., Das, P. K., Roy R., Reddy G. R., Seismic Safety of Structures: Influence of Soil-flexibility, Asymmetry and Ground Motion Characteristics, 307 (3-5), 452-480, Journal of Sound and Vibration, Elsevier, 2007
357
M. K. Pandit, S. Haldar and M. Mukhopadhyay, Free vibration analysis of laminated composite rectangular plate using finite element method, V-26, 69-80, International Journal of Reinforced Plastics and Composites, 2007
358
Dutta, S. C., Roy, R., Das, P. K., Roy, R., Reddy, G. R, Seismic safety of structures: Influence of soil-flexibility, asymmetry and ground motion characteristics, 307, . 3-5, 452-480., Journal of Sound and Vibration, Elsevier,, 2007
359
Debashis Pal, Jishnu Bhattacharya, Suman Chakraborty and Pradip Dutta, An Enthalpy Model for Simulation of Dendritic Growth, 50, 59-78, Numerical Heat Transfer, Part B, 2006
360
M. C. Manna, A. H. Sheikh and R. Bhattacharyya, A compressible finite element model for hyperelastic members under different modes of deformation, 24(2), 227 - 245, International Journal of Structural Engineering and Mechanics, 2006
361
S. Roy, S. K. Mukherjea and N. Nandi, Numerical aspects for the study of any compressible fluid-flow problem, 27, 15-26, Journal of River Behaviour and Control (ISSN: 0970-7258), 2006
362
Bhattacharya, K., Dutta, S. C., and Roy, R., Seismic design aids for buildings incorporating soil-flexibility effect, 5, 2, 341-348., journal of Asian Architecture and Building Engineering,, 2006
363
S Majumder, A Roy Chowdhury, S Pal, An algorithm to calculate the components of all muscle forces during each phases of the gait cycle, for the pelvic-femur complex, Journal of Mechanics in Medicine and Biology 5 (04), 539-548, 2005
364
N Nandi, A Roy Chowdhury, SC Dutta, Analysis of shear failure of earthen dams, Dam engineering, 255-282, 2005
365
S Majumder, A Roy Chowdhury, S Pal, Biomechanical analysis of human pelvis under muscolo-skeletal load using 3D finite element method International, Journal of Applied Mechanics and Engineering 10 (4), 647-665, 2005
366
S Majumder, S Sarkar, A Roy Chowdhury, S Pal, CT Scan Based Reconstruction of 3D Images for Realistic Analysis by Finite Element Method, Advances in Medical Diagnostic Techniques and Procedures 169, 2005
367
Sahoo, A., Ghosh A., Roy Chowdhury, A.,, Stress analysis of cracked and fractured femur with fixing plate using finite element method., Journal of the Institute of Engineers (India), Vol. 86, pp. 24-29., 2005
368
Nandi, N., Dutta, S. C. and Roychowdhuy, Analysis of shear failure of earthen dams, XV(4), 255-282, International journal of Dam Engineering, (ISSN 0-617-00563-X), 2005
369
Majumder S, Roychowdhury A, Pal S, An algorithm to calculate the components of all muscle forces during each phases of the gait cycle for the pelvic-femur complex, 5(4), 539-548, Journal of Mechanics in Medicine and Biology (World Scientific), 2005
370
Majumder S, Roychowdhury A, Pal S, Biomechanical analysis of human pelvis under musculo-skeletal load using 3D finite element method, 10(4), 647-665, International Journal of Applied Mechanics and Engineering (University of Zielona Góra Press), 2005
371
Dutta S. C., Das, P. K., Roy R., Seismic Behaviour of Code-Designed Bi-Dectionally Eccentric Systems, 131 (10), 1497-1514, Journal of Structural Engineering, ASCE, 2005
372
Salil Haldar and Abdul Hamid Sheikh, Free vibration analysis of isotropic and composite folded plates using a shear flexible element, V-42, 208-226, Finite Elemenets in Analysis and Design, 2005
373
Dutta, S. C., Das, P. K., and Roy, R,, Seismic behaviour of code-designed bi-directionally eccentric systems, 131, 10, 1497-1514, Journal of Structural Engineering, ASCE, 2005
374
S Majumder, A Roy Chowdhury, S Pal, Dynamic response of the pelvis under side impact load–a three-dimensional finite element approach, International journal of crashworthiness 9 (1), 89-103, 2004
375
S Sarkar, S Majumder, A Roy Chowdhury, Response of human head under static & dynamic load using finite element method Trends, Biomater Artif Organs 17 (2), 130-4, 2004
376
S Majumder, A Roy Chowdhury, S Pal, Variations of stress in pelvic bone during normal walking, considering all active muscles Trends, Biomater Artif Organs 17 (2), 48-53, 2004
377
A Roy Chowdhury, S Gupta, PEC Vidyasagara, S Pal, Wear studies of frequently used implant materials Trend Biomater., Artif. Organs 17, 135-140, 2004
378
S. Haldar, P. Das and M. C. Manna, A high precision shear flexible element for bending analysis of thick/thin triangular plates, 18(1), 79 – 90, International Journal of Structural Engineering and Mechanics, 2004
379
Majumder S, Roychowdhury A, Pal S, Dynamic response of the pelvis under side impact load–a three-dimensional finite element approach, 9(1), 89-103, International Journal of Crashworthiness (Taylor & Francis), 2004
380
Sarkar S, Majumder S, Roychowdhury A, Response of human head under static and dynamic load using finite element method, 17(2), 130-134, Trends in Biomaterials and Artificial Organs (SBAOI), 2004
381
Majumder S, Roychowdhury A, Pal S, Variations of stress in pelvic bone during normal walking considering all active muscles, 17(2), 48-53, Trends in Biomaterials and Artificial Organs (SBAOI), 2004
382
Abdul Hamid Sheikh, Salil. Haldar and Dipak Sengupta, A shear flexible triangular element for analysis of composite shells, V-11, 585-596, Shock and Vibration, 2004
383
Salil Haldar, Pintu Das and Mihir Chandra Manna, Bending analysis of thick/thin triangular plates by finite element method, V-8, 79-90, Structural Engineering and Mechanics, 2004
384
Abdul Hamid Sheikh, Salil. Haldar, and Dipak Sengupta, Free flexural vibration of composite plates in different situations using a high precision triangular element, V-10, 371-384, Journal of Vibration and Control, 2004
385
Dutta, S. C., Roy, R., and Dutta, S., Applicability of a few analytical formulations for dynamic characteristics of elevated tanks with battered stagings, 9, 4, 803-819., Int. Jr. of Applied Mechanics and Engineering, Technical University Press, 2004
386
Dutta, S. C., Bhttacharya, K., and Roy, R., Response of low-rise buildings under seismic ground excitation incorporating soil response of low-rise buildings under seismic ground excitation incorporating soil-structure interaction, 24, 12, 893-914., Soil Dynamics and Earthquake Engineering, 2004
387
Roy, R., Bhattacharya, K. and Dutta, S. C, “Behaviour of grid foundation under static gravity loading, 85, .261-268., Journal of Institution of Engineers, 2004
388
S. Haldar, M. C. Manna and A. H. Sheikh, Static analysis of isotropic thick/thin skew plates by finite element method, 8(2), 245 - 254, International Journal of Applied Mechanics and Engineering, 2003
389
M. C. Manna, S. Haldar, and A. H. Sheikh, Free vibration of isotropic thick/thin plates by a sub-parametric shear deformable element, 8(3), 441 - 448, International Journal of Applied Mechanics and Engineering, 2003
390
S. Haldar and M. C. Manna, A high precision shear deformable element for free vibration of thick/thick composite trapezoidal plates, 3(3), 213 – 229, International Journal of Steel and Composite Structures, 2003
391
M. C. Manna, A. K. Bhattacharya, S. Choudhury and S. C. Maji, Groundwater flow beneath a sheetpile analyzed using six-noded triangular finite elements, 84, 121 – 129, Journal of The Institution of Engineers (India), 2003
392
Sarkar, P., Dutta, S. C. and Nandi, A Critical Review of Dam Analysis Methodologies, 8(3), 461-482, International Journal of Applied Mechanics and Engineering, 2003
393
Salil Haldar, Mihir Chandra Manna, and Abdul Hamid Sheikh, Static analysis of isotropic thick/thin skew plates by finite element method, V- 8(2), ,245-254, International Journal of Applied Mechanics and Engineering, 2003
394
Salil Haldar, Dipak Sengupta and Abdul Hamid Sheikh, Free vibration analysis of composite right angle triangular plate using a shear flexible element, V-22(3), 229-255, International Journal of Reinforced Plastics and Composites, 2003
395
Mihir Chandra Manna, Salil Haldar and Abdul Hamid Sheikh, Free vibration analysis of isotropic thick/thin plates using a sub-parametric shear deformable element, V- 8(3), 441-448, International Journal of Applied Mechanics and Engineering, 2003
396
Salil Haldar and Mihir Chandra Manna, A high precision shear deformation element for free vibration of thick/thin composite trapezoidal plates, V-3(3),, 213-229, Journal of steel and composite Structures, 2003
397
Salil Haldar, Dipak Sengupta and Abdul Hamid Sheikh, A high precision shear deformable element for free vibration analysis of isotropic trapezoidal plate, V-83,, 259-266, Journal of Institution of Engineers (India), 2003
398
B. Bhattacharyya & S. Chakraborty, Stochastic Sensitivity of 3-D Elastodynamic Response subjected to Random Ground Excitation, 3(2), 283 – 297, International Journal of Stability & Structural Dynamics, 2003
399
M. C. Manna, Dr. M. L. Munjal and S. Haldar, Time-domain analysis of extended-tube expansion chamber mufflers by means of the method of characteristics, 83, 28-35, Journal of The Institution of Engineers (India), 2002
400
M. C. Manna, S. Haldar and A. K. Bhattacharya, Bending analysis of isotropic plates using a sixteen noded sub-parametric element, 7(4), 1279 - 1290, International Journal of Applied Mechanics and Engineering, 2002
401
A K Bhattacharya, K Debnath, Discussion of “Flow Interaction of Meandering River with Floodplains,” by Kanhu Charan Patra and Srijib K. Kar, 128, 245--245, Journal of Hydraulic Engineering, ASCE, 2002
402
Basu P. K., Bhattacharya A. K., Debnath, K and Nandi, N, Interbasin transfer of water for development in West Bengal perspective, 20(1), 12-18, Journal of ASCE (India Section), 2002
403
Dutta S. C., Das, P. K., Inelastic Seismic Response of Code-Designed Reinforced Concrete Asymmetric Buildings with Strength Degradation, 24 (10), 1295-1314, Engineering Structures, Elsevier, 2002
404
Das P.K. , Dutta S.C., Effect of Strength and Stiffness Deterioration on Seismic Behaviour of R/C Asymmetric Buildings, 7 (2), 527-564, International Journal of Applied Mechanics and Engineering, 2002
405
Dutta S. C., Das, P. K., Validity and Applicability of Two Simple Hysteresis Models to Assess Progressive Seismic Damage in R/C Asymmetric Buildings, 257 (4), 753-777, Journal of Sound and Vibration, Elsevier, 2002
406
Abdul Hamid Sheikh, Salil Haldar and D. Sengupta, A high precision shear deformable element for the analysis of laminated composite plates of different shapes, V- 55, 329-336, Composite Structures, 2002
407
Abdul Hamid Sheikh, Salil Haldar and D. Sengupta, Vibration of plates in different situations using a high precision shear deformable element, V- 253(2), 329-345, Journal of Sound and Vibration, 2002
408
Mihir Chandra Manna, Salil Haldar and A. K. Bhattacharya., Bending analysis of isotropic plates using a sixteen noded sub-parametric element, V- 7(4), 1271-1282, International Journal of Applied Mechanics and Engineering, 2002
409
Dutta, S. C., and Roy, R, “A critical review on idealization and modelling for interaction among soil-foundation structure system, 80, . 20-21, pp. 1579-1594., Computers and Structures, Elsevier,, 2002
410
Salil Haldar, Dipak Sengupta and Abdul Hamid Sheikh., ‘A high precision shell element with shear deformation for the analysis of isotropic and composite shells, V-3(3),, 277-290, International Journal for Computational Engineering Science, 2002
411
Mihir Chandra Manna, Salil. Haldar and M. L. Munjal, ‘Time-domain analtsis of extended-tube expansion chamber-mufflers by means of method of characteristics’, V-83, 28-33, Journal of Institution of Engineers (India), 2002
412
Roy, R., Dutta, S. C., and Moitra, D., Soil-structure interaction in buildings with isolated and grid foundations: Progress and scopes”, 31, . 4 pp. 15-36., The Bridge and Structural Engineers,, 2002
413
R. Roy, Estimation of fundamental time periods of building frames: A brief review, XXI, 2, pp. 8 - 9., , Civil Engineering Today, 2002
414
B. Bhattacharyya & S. Chakraborty, NE-MCS Technique for Stochastic Structural Response Sensitivity, 191(49 – 50), 5631 – 5645, Computer Methods in Applied Mechanics and Engineering, 2002
415
S. Chakraborty & B. Bhattacharyya, An efficient 3D Stochastic Finite Element Method, 39(9), 2465 – 2475, International Journal of Solids and Structures, 2002
416
B. Bhattacharyya & S. Chakraborty, Stochastic Dynamic Sensitivity of Uncertain Structures subjected to Random Earthquake Loading, 249(3), 543 – 556, Journal of Sound and Vibration, 2002
417
S Dey, K Debnath, Sediment pickup on streamwise sloping beds, 127(1), 39--43, Journal of Irrigation and Drainage Engineering, ASCE, 2001
418
Roy Chowdhury, A., Pal, S. and Saha, S., Finite Element Analysis of an Artificial Temporal Mandibular joint.”, Automedica, Vol. 20, pp. 283-295., 2001
419
Dey, S and Debnath, K, Sediment pick-up on stream-wise sloping beds (vol 127, pg 39, 2001), 127, 263--263, Journal of Irrigation and Drainage Engineering, ASCE, 2001
420
Roy, R., and Dutta, S. C., “Differential settlement among isolated footings of building frames: The problem, its estimation and possible measures, 6, 1, pp. 165 - 186., Int. Journal of Applied Mechanics and Engineering, Technical University Press, 2001
421
Abdul Hamid Sheikh, Pijush Topdar and Salil. Haldar, An appropriate FE model for through-thickness variation of displacement and potential in thin/thick smart laminates, V-51,, 401-409, Composite Structures, 2001
422
R. Ghosh, B. Bhattacharyya & S. Chakraborty, Stochastic sensitivity analysis if structures using first-order perturbation, 36, 291 – 296, Meccanica – International Journal of the Italian Association of Theoretical and Applied Mechanics, AIMETA, 2001
423
S Dey, K Debnath, Influence of streamwise bed slope on sediment threshold under stream flow, 126, 255--263, Journal of Irrigation and Drainage Engineering, ASCE, 2000
424
AR Chowdhury, S Pal, A 3-D FEM analysis of single and multiple screw-root dental implant fixed in a mandible, Critical Reviews™ in Biomedical Engineering 28 (3&4), 2000
425
AR Chowdhury, S Pal, Stress analysis of an artificial temporal mandibular joint, Critical Reviews™ in Biomedical Engineering 28 (3&4), 2000
426
S Dey, H K Dey Sarkar, K Debnath, Sediment threshold under stream flow on horizontal and sloping beds, 125 (5), 545--553, Journal of Engineering Mechanics, ASCE, 1999
427
Salil haldar, Susanta Sarkar and Abdul Hamid Sheikh., ‘Finite element analysis of composite folded plates with elastically restrained edges, V-18(7), 626-641, International Journal of Reinforced Plastics and Composites, 1999
428
Nandi, N., De, M., Roy, A. and Dev, D, A Case Study on the Aspects of Hydraulic Model Study of River Subarnarekha, 25, 53-64, Journal of River Behaviour and Control (ISSN: 0970-7258), 1998
429
Das, S., Bhattachariya, A. K, Nandi, N. and Bhar, K, A Study of Instantaneous Breaching of Dams, 25, 10-18, Journal of River Behaviour and Control (ISSN: 0970-7258), 1998
430
D. C. Dalal, N. Datta, S. K. Mukherjea, 3. “Unsteady Natural Convection of a Dusty Fluid in an Infinite Rectangular Channel”, Vol. 41, 1997, International Journal Heat and Mass Transfer, 1997
431
G. C. Layek, P. Niyogi, M. K. Maiti and S. K. Mukherjea, 4. “Numerical Study of Viscous Flow in a Long Tube with Symmetrical Constriction”, Vol. 5, No. 3; October 1996., Computational Fluid Dynamics Journal, 1996
432
S Pal, A Roy Chowdhury, Design Analysis of Single Implanted Tooth, ASME-PUBLICATIONS-BED 29, 101-101, 1995
433
S Pal, A Roy Chowdhury, UHMWPE Contour Affects the Stress and Tribology of Knee Prostheses, ASME-PUBLICATIONS-BED 29, 555-555, 1995
434
S. K. Mukherjea and G. Bandyopadhyay, 5. A Navier Stokes Simulation of Vortex Shedding from Square Cylinder in Unconfined Domain” Journal of Aeronautical Society of India, August 1992., Journal of Aeronautical Society of India, 1992
435
S. Mukherjee and G. Bandyopadhyay,, 6. “Separated Flow about a wedge” The Aeronautical Journal of the Royal Aernautical Society, June/July 1990, The Aeronautical Journal of Royal Aeronautical Society, 1990
1
L. Prince Raj, E. Esmaeilifar, H. Jeong, and R. S. Myong, Computational Simulation of Glaze Ice Accretion on a Rotorcraft Engine Intake in Large Supercooled Droplet Icing Conditions, AIAA SciTech Forum, 2022
2
Satish Kumar Reddy, Mohammed Sohail, Indrajit Mukherjee, Sankar Kumar Jayaraman, Influence of Higher-Order Blade Modes on Aeroelastic Stability of Transonic Rotor ( Accepted ), National Aerospace Propulsion Conference (NAPC) , December 19-20, 2022
3
R Roy, A Mahajan, C Pradhan, Response of structures to motions with fling step: Does fling matter?, 1 (3), Structural Engineering Convention, 2022
4
A Santra, R Roy, Identification of the domain of significance for bidirectional analysis under seismic excitation, In: Saha, S., Sajith, A.S., Sahoo, D.R. and Sarkar, P. (eds), Recent Advances in Materials, Mechanics and Structures. Lecture Notes in Civil Engineering, 269, Springer, Singapore., 2022
5
A Sengupta, R Roy, Consequences of sequence of motion: Implications of site characteristics, In: Saha, S., Sajith, A.S., Sahoo, D.R. and Sarkar, P. (eds), Recent Advances in Materials, Mechanics and Structures. Lecture Notes in Civil Engineering, 269, Springer, Singapore., 2022
6
K. Bhowmik, H. Ambati, N. Khutia, A. Roy Chowdhury, Prediction of Elastic Constants of Spiral MWCNT Reinforced Nanocomposites by Finite Element Analysis, 37, 449–458, In: Maiti D.K. et al. (eds) Recent Advances in Computational and Experimental Mechanics, Vol–II, Lect. Notes Mech. Eng., Springer, 2022
7
Satya Prakash Pandey, Sandip Sarkar and Debashis Pal, Study of path selection of a droplet in a symmetric Y-microchannel using a uniform electric field, FMFP2022–4030, 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP), Dec 14-16, 2022, IIT Roorkee, Roorkee, India, 2022
8
A. Das, N. Nandi and B.C. Barman, Comparative study of the scaling of sediment transport in a bifurcated channel with reference to the river Kangsabati, Paper code- PA0102(FM9), 67th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), 2022
9
S. Majumder, N. Nandi and B.C. Barman, Physical Model Study of Alluvial Bend Channel with and without Structural Measures, Paper code- PA0151(FM9), 67th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), 2022
10
Saswata Majumdar, Dr. Nityananda Nandi, Dr. B.C. Barman, Experimental study on some aspects of Meandering Behaviour on an Alluvial river, Paper code-FM9, 66th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), 2021
11
Ribhu Pal, Prince Raj Lawrence Raj, Numerical Studies of Shock-Wave/Boundary-Layer Interaction over Blunted Cone/Flare at Hypervelocity Speed, Proceedings of the 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference, 2021
12
Mallick M.,Chakrabarty A., Khutia A., Genetic algorithm based design optimization of crashworthy honeycomb sandwiched panels of AA7075-T651 aluminium alloy for aerospace applications, 1st International Conference on Materials Science and Mathematics for Advanced Technology (MSMAT 2021), Materials Today: Proceedings, Elsevier, 10 November 2021, 2021
13
Chakrabarty A., Chakraborty P., Sahu V.K., Gurao N.P., Khutia N., Investigation of Strain Localization in Additively Manufactured AlSi10Mg using CPFEM, Indo-Korean Workshop on Multi-Functional Materials for Extreme Loading , IIT Madras-Hanyang University, MFMEL-2021, February 22-24, 2021., 2021
14
Snehasis Chowdhury, Tanmoy Mondal, and Prince Raj Lawrence Raj, Assessment of Various RANS Based Turbulence Models for Predicting Near Wall Flow and Heat Transfer Quantities for a Turbulent Slot Jet Impingement, The 8th International Conference on Fluid Mechanics and Fluid Power, 2020
15
V. Rastogi , N. Nandi, Numerical investigation of wall shear stress for different 2-D train models inside a tunnel, Paper ID-ICRACEM/2020/FK-20-003, International conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM) held at IIT, KGP, 2020., 2020
16
A. Das, N. Nandi, Experimental study on the discharge and sediment sharing at bifurcation channel, Paper ID-ICRACEM/2020/FM-20-051, International conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM) held at IIT, KGP, 2020., 2020
17
S. Saha, N. Nandi, Effect of guide vane on pressure drop characteristics for single-phase flow through 90° pipe bend, paper ID-F68, Indian Society of Theoretical and Applied Mechanics (ISTAM), 2020
18
Basantia S.K.,Prustya P.K.,Das D.,Khutia N., Micro-scale simulation of nanoindentation characteristics in dual-phase steel, Materials Today: Proceedings, Elsevier, 2020
19
Vibhanshu Pandey, Partha Pratim Dey, Niloy Khutia, Suneel K Gupta, Development of Modified Cyclic Plasticity Model To Simulate Cyclic Behavio Behaviour For Sa333-Mn Steel Under LCF Loading Conditions, International Conference on Recent Developments in Mechanical Engineering (ICRAME 2020), 07-09 February 2020, NIT Silchar, India, 2020
20
K. Bhowmik, H. Ambati, N. Khutia and A. Roy Chowdhury, Prediction of Elastic Constants of Spiral MWCNT Reinforced Nanocomposites by Finite Element Analysis, International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM-2020), September 04-06, Indian Institute of Technology, Kharagpur, 2020
21
Mainak Mallick,Aniket Chakrabarty,Niloy Khutia, Design optimization of honeycomb sandwich panel through Genetic Algorithm, Indian Society of Theoretical and Applied Mechanics (ISTAM), 2020
22
Lawrence Raj, Prince Raj and Myong, Rho Shin, Three-Dimensional Computational Simulation of Glaze Ice Accretion on a Rotorcraft Engine Intake, 1659, AIAA Scitech 2019 Forum, 2019
23
Singh AP, Majumder S, Finite element analysis for evaluation of post implant axial loading condition of femur fracture fixation plate made of shape memory alloy for optimum healing, PID 295 (1–17), 64th International Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), 9-12 December 2019, IIT Bhubaneswar, 2019
24
S. Roy, R. Kumar, K. Bhowmik, A Study on Flexural Rigidity of Hexagonal Honeycomb Sandwich Structures using Finite Element Analysis, 64rd congress of ISTAM, December 09-12, IIT Bhubaneswar, 2019
25
P. Chauhan, K. Bhowmik, Estimation of Elastic moduli of defective Multi-walled Carbon Nanotubes by Finite Element Approach, 64rd congress of ISTAM, December 09-12, IIT Bhubaneswar, 2019
26
Rastogi, V. and and Nandi, N, Numerical Investigation of the Flow Parameters inside a Tunnel for a High Speed Train passing through it, paper ID 92, Section FM 7, Indian Society of Theoretical and Applied Mechanics (ISTAM) held at IIT Bhubaneswar, 2019
27
S. Saha and N. Nandi, Effect of guide vane on Dean Vortex for single-phase turbulent flow through 90 degree pipe bend, paper ID 81, Section FM 7, Indian Society of Theoretical and Applied Mechanics (ISTAM) held at IIT Bhubaneswar, 2019
28
Rastogi, V. and and Nandi, N, Numerical Analysis on Reduction of Drag Force on the High-Speed Train Through a Tunnel Using k-? Turbulence Modelling, Paper Id no: ICCMS19SD024932, International Congress on Computational Mechanics and Simulation (ICCMS) held at IIT, Mandi, 2019
29
S. Saha and N. Nandi, Effect of Guide Vane on Flow Separation for Single Phase Flow through Pipe Bend by k-? Turbulence Model, paper ID: ICCMS19SD024933, International Congress on Computational Mechanics and Simulation (ICCMS) held at IIT, Mandi, 2019
30
Pandey, Rahul Dev and Nandi, N, On Some Aspects of Viscous Instability Phenomenon between two Parallel Plates, ID: ICCMS19SD024934, International Congress on Computational Mechanics and Simulation (ICCMS) held at IIT, Mandi, 2019
31
S Chaudhuri, K Debnath, V K Das, Comparison of scour and stream bed modification around circular pier for different stream bed characteristics -an experimental approach, Paper 46, HYDRO 2019 - - 24thInternational Conference on Hydraulics, Water Resources and River Engineering, At: University College of Engineering, Osmania University, Hyderabad, India, 2019
32
V K Das, S Chaudhuri, K Debnath, Effect of caly-sand mixture on river bank morphology and erosion, Session 7L-1826, 1108, 34th IAS (International Association of Sedimentologists) Meeting of Sedimentology, an International Conference on Sedimentology to face societal challenges on risk, resources and record of the past, D, 2019
33
S Chaudhuri, V K Das, K Debnath, Scouring and Downstream Bed Deformation due to Obstruction of Stream Flow – an Experimental Study with Fine-grained Non-cohesive Sediment Bed, Session 10A, 1808, 1808, ‘34th IAS Meeting of Sedimentology - International Conference on Sedimentology to face societal challenges on risk, resources and record of the past, at Department of Earth Sciences of Sapienza Univer, 2019
34
V K Das, S Chaudhuri, K Debnath, Erosion Mechanisms and Modification of Morphological Pattern of Meandering River Bank - A Case Study at the Middle Flow Regime of the Hooghly River near Nawadip, West Bengal, India, Hydro 2019 International Hydraulics, Water Resources and Coastal EngineeringAt: Osmania University, Hyderabad., 2019
35
Das P., Khutia N., Dey P. P., Gupta Suneel. K., Arora P., Experimental Analysis and Simulation of Cyclic Plastic Behaviour under Uniaxial Multi Step Low Cycle Fatigue of 304 LN Stainless Steel, International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (December 5-7, 2019), Organized by Indian Institute of Technology Ropar, India, Society of Mecahn, 2019
36
Firoz R., Chakrabarty A., Khutia N., Bar H. N., Study of Deformation and Fracture Behavior of Inconel 718 through Experiments and FE Analysis with GTN Model, Inernational Conference on Advanced Materials and Processes for Defence Applications (ADMAT 2019), Sept 23-25, 2019
37
Sengupta, Bidesh and Cho, Min Young and Raj, Lawrence Prince and Myong, Rho Shin, Development of Aero and 6-DOF Solvers for Predicting Ice Shedding Trajectory, 54--55, Korean Society for Aeronautical and Space Sciences, 2019
38
Mondal, T and Raj, L Prince and Myong, RS, NUMERICAL INVESTIGATION OF CONJUGATE HEAT TRANSFER OF TWO IMPINGING JETS FOR ANTI-ICING OF AIRCRAFT, 150--151, Korean Society for Aeronautical and Space Sciences, 2018
39
Raj, L Prince and Vaghela, M and Myong, RS, COMPUTATIONAL INVESTIGATION OF EFFECTS OF ROUGHNESS AND HEAT TRANSFER ON AIRFOIL ICE ACCRETION, 140--141, Korean Society for Aeronautical and Space Sciences, 2018
40
Das P., Khutia N., Dey P. P., Gupta S. K., Cyclic plasticity model with modified isotropic hardening rule for low cycle fatigue life prediction of SA333 GR.6 carbon steel, Pages 127-130, Proceedings of the 1st International Conference on Mechanical Engineering (INCOM18), Jadavpur University 4th – 6th January, 2018
41
Basantia S. K., Khutia N., Das D., Microstructure Based FE Simulation to Predict Flow Behaviour of Dual Phase Steel Through RVE Approach, Pages 131-134, Proceedings of the 1st International Conference on Mechanical Engineering (INCOM18), Jadavpur University 4th – 6th January, 2018
42
K. Bhowmik, P. Kumar, N. Khutia, A. Roy Chowdhury, Evaluation of Directional Strength of SWCNT Reinforced Nanocomposites : A Finite Element Study, 5, 20528–20534, Mater. Today Proc. (Scopus), 2018
43
Singh AP, Majumder S, Finite element analysis of effectiveness of fracture fixation plate made of shape memory alloy, PID-070, 63th International Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), 9-12 December 2019, IIT Bhubaneswar, 2018
44
K. Bhowmik, T. Nandy, P. Kumar, N. Khutia, A. Roy Chowdhury, Prediction of Directional Young's Modulus of Particulate Reinforced MMC using Finite Element Methods, 377, 012057, IOP Conf. Ser.: Mater. Sci. Eng. (Scopus), 2018
45
Biswas JK, Rana M, Roy S, Majumder S, Karmakar SK, Roychowdhury A, Effect of range of motion (ROM) for pedicle-screw fixation on lumbar spine with rigid and semi-rigid rod materials: A finite element study, 402(12146), 1–8, 2nd International Conference on Advances in Mechanical Engineering , 22-24 March 2018, Kattankulathur, India & IOP Conf. Series: Materials Science and Engineering, 2018
46
K. Bhowmik, P. Kumar, N. Khutia, A. Roy Chowdhury, Estimation of Effective Directional Strength of Single Walled Wavy CNT Reinforced Nanocomposite, 338, 012016, IOP Conf. Ser.: Mater. Sci. Eng. (Scopus), 2018
47
Maity R, Majumder S, Reduction in stress shielding with plate modification for tibial fracture fixation, International Conference on Mathematical Modelling and Computations in Biosystems, 12-14 March 2018, IIT Roorkee, 2018
48
Rastogi V. and and Nandi, N, Numerical Analysis of Variation on Design Modification of Train & Tunnel Geometries to reduce Aerodynamic Drag on Train, 63rd Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM) held on Dayanada Sagar University, Bangaluru, 20-23 December, 2018 (paper 75), 2018
49
Pandey Rahul Dev and Nandi, N, Experimental Investigation of Viscous Fingers usin Hele-Shaw Apparatus, 63rd Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM) held on Dayanada Sagar University, Bangaluru, 20-23 December, 2018 (paper 136), 2018
50
Dutta, P. and Nandi, N., Numerical study on the development of Dean Vortices in 90? pipe bend at turbulent flow condition, International conference organized by REST society for research international at Goa in June 2018 (Paper 25), 2018
51
Saha, S. and Nandi, N, Effect of curvature ratio on velocity distribution for flow through 90° pipe bend with guide vane under high Reynolds number condition, International conference organized by REST society for research international at Goa in June 2018 (Paper 44), 2018
52
S Pal, A. Majumdar and S. Haldar, Free vibration analysis of isotropic cut-out plate carrying concentrated and distributed mass, 63rd. Congress of ISTAM, 2018
53
A. Mandal, C. Ray and S. Haldar, Free vibration analysis of laminated composite skew shells., 11th SEC, 2018
54
M.P. Khan, K. Bhowmik, A. Barui, A. Roy Chowdhury, Finite element modelling of cytoskeletal components under varying loads and elastic properties, 63rd congress of ISTAM, December 20-23, Dayananda Sagar University, Bengaluru, 2018
55
S. Datta, N. Dana, S. Bhagat, K. Bhowmik, A. Roy Chowdhury, Achieving Desired Modulus by Varying Pore Parameters using Finite Element Analysis, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), November 8-10, NIT Meghalaya, Shillong, 2018
56
K. Bhowmik, S. Akhtar, N. Khutia, A. Roy Chowdhury, Directional Young’s Modulus of SWCNT Reinforced Nanocomposite by Finite Element Analysis, 1st International Conference on Processing and Characterization of Materials (ICPCM–2018), December 8-10, NIT Rourkela, Odisha, 2018
57
P. K. Raushan,K., Debnath, S. K. Singh, Turbulence flow statistics downstream of grids with the various mesh size, 6, Proceedings of 23st International Conference on Hydraulics, Water Resources and Coastal Engineering (HYDRO-2018), NIT, Patna, India., 2018
58
S. K. Singh, P. K. Raushan, K. Debnath, Turbulent flow over a train of K-type roughness., 34, Proceedings of 23st International Conference on Hydraulics, Water Resources and Coastal Engineering (HYDRO-2018)NIT, Patna, India., 2018
59
V. K. Das, S. Chaudhuri, K. Debnath, Study on Erosion and Undercut of Cohesive River Bank-An Experimental Approach, 36, Proceedings of 23st International Conference on Hydraulics, Water Resources and Coastal Engineering (HYDRO-2018)NIT, Patna, India., 2018
60
Singh, V, Basantia, S.K., Bhattacharya, A., Das, D., Khutia, N., Low cycle fatigue analysis of ferrite-martensite dual-phase steel using advanced cyclic plasticity models, 377(1),13 July 2018,Article number 012161, 1st International Conference on Mechanical, Materials and Renewable Energy, ICMMRE 2017; Majitar, East Sikkim; India; 8 December 2017 through 10 December 2017; Code 137950, 2018
61
Bhowmik K., Kumar P., Khutia N., Chowdhury AR., Estimation of Effective Directional Strength of Single Walled Wavy CNT Reinforced Nanocomposite, 338(1), April 2018, Article number 012016, IOP Conference Series: Materials Science and Engineering; Materials Science and Engineering; 7th National Conference on Processing and Characterization of Materials, NCPCM 2017; National Institute of , 2018
62
Basantia SK., Singh V., Bhattacharya A., Khutia N., Das D., Prediction of Tensile Behaviour of Ferrite-Martensite Dual Phase Steel using Real Microstructure-based RVE Simulations, 377(1), 13 July 2018, Article number 012057, 1st International Conference on Mechanical, Materials and Renewable Energy, ICMMRE 2017; Majitar, East Sikkim; India; 8 December 2017 through 10 December 2017; Code 137950, 2018
63
Bhowmik K., Kumar P., Khutia N., Roy Chowdhury A., Evaluation of Directional Strength of SWCNT Reinforced Nanocomposites: A Finite Element Study, Volume 5, Issue 9, 2018, Pages 20528-20534, Materials Today: Proceedings; 8th International Conference on Materials Processing and Characterization, ICMPC 2018; Hyderabad; India; 16 March 2018 through 18 March 2018; Code 140097, 2018
64
Bhowmik K., Nandy T., Kumar P., Khutia N., Roy Chowdhury A., Prediction of Directional Young's Modulus of Particulate Reinforced MMC using Finite Element Methods, Volume 377, Issue 1, 13 July 2018, Article number 012057, IOP Conf. Series: Materials Science and Engineering 377 (2018) 012057; International Conference on Mechanical, Materials and Renewable Energy,, 2018
65
Mondal, T and Raj, L Prince, NUMERICAL INVESTIGATION OF INTERACTION OF TWO TURBULENT PARALLEL JETS WITH VARIOUS VELOCITY RATIOS, 39--40, Korean Society for Aeronautical and Space Sciences, 2017
66
Raj, L Prince and Jang, WY and Myong, RS, EULERIAN-BASED SIMULATION OF DROPLET IMPINGEMENT ON THE ENGINE INLET NACELLE, 112--113, Korean Society for Aeronautical and Space Sciences, 2017
67
Chakrabarty A., Khutia N., Bar H. N., Dey P. P., Sivaprasad S., Effect of Loading Variations on Damage of SA333 C-Mn Steel, Volume 4, Issue 2, 2017, Pages 415-423, Materials Today: Proceedings;Proceedings of 5th International Conference on Materials Processing and Characterization (ICMPC-2016), 12th to 13th March, 2016, GRIET, Hyderabad, 2017
68
Das B. K., Bakkar Md Abu, Khutia N., Das D. D., Low Cycle Fatigue Performance Evaluation of TMT rebar, Volume 4, Issue 2, 2017, Pages 2554-2563, Materials Today: Proceedings;Proceedings of 5th International Conference on Materials Processing and Characterization (ICMPC-2016), 12th to 13th March, 2016, GRIET, Hyderabad, 2017
69
S. Saha and N. Nandi, Influence of Guide vane on Flow separation Phenomena for Single Phase turbulent Flow through 900 Pipe Bend, ISTAM (Paper No-209) held at University College of Engineering, Osmania University, Dec. 15-18, 2017, 2017
70
S.S.R. Suman and N. Nandi, Numerical analysis of change in pressure profile with different Mach number and angle of attack in subsonic state of flow for an airfoil, Computational Science Symposium, 16-18 March, 2017, IISC Bangalore., 2017
71
P. Kumar, R. Kumar, and PC Joshi, Studies of heat of combustion for AP, ADN and KDN pellets mixed with carbon black, International conference on recent development in science, engineering, and technology, 2017
72
Abhishek, A and Krishna, R and Sinha, Sourav and Bhowmik, Joydeep and Das, Debopam, Design, development and flight testing of a novel quadrotor convertiplane unmanned air vehicle, 73rd Annual Forum of the American Helicopter Society, 2017
73
A. Mandal, C. Ray and S. Haldar. ‘, Free vibration analysis of laminated composite plates and shells subjected to concentrated mass at the centre, 7th ICTACEM, 2017
74
K. Kalita., P. Nashre, P. Dey, S. Haldar, Response Surface based Metamodeling- Numerical experiments on Noisy dataset, ICMMRE, 2017
75
P. Nashre, K. Kalita., P. Dey, S. Haldar, Multi-objective design optimization of laminated composite plates for maximum fundamental frequency & frequency separation, 62ndCongress of ISTAM, 2017
76
S. Roy, K. Debnath, Flow characteristics of a surface interacting turbulent jet, International conference on Fluid Mechanics and Fluid Power (FMFP), Amrita University, 2017
77
P. K. Raushan, S. K., Singh, K. Barman, K. Debnath, Combined wave-current turbulent flow over a train of rib roughness, International Conference on Conference on Ship and Offshore Technology (ICSOT), IIT Kharagpur, 2017
78
S. Roy, K. Pushpak, K. Debnath, Characterization of flow structures for a surface interacting plane turbulent jet, 72, International Conference of Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM), IIT Kharagpur., 2017
79
K. Barman, K. Debnath, Effect of wave-current interaction over hemispherical obstacle, International conference on Fluid Mechanics and Fluid Power (FMFP), Amrita University, Kerala, 2017
80
K. Barman, K. Debnath, Wave-current combined interaction on the current flow, International Conference on Ship and Offshore Technology (ICSOT), IIT Kharagpur, 2017
81
K. Barman, K. Debnath, Open Channel turbulent flow in the presence of surface wave, 73, International Conference of Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM), IIT Kharagpur, 2017
82
Raj, L Prince and Singh, S and Karchani, A and Myong, RS, PARALLELIZATION OF A MODAL DISCONTINUOUS GALERKIN METHOD USING SPMD PROGRAMMING MODEL, 160--161, Korean Society for Aeronautical and Space Sciences, 2016
83
Sahoo A, Majumder S, Roychowdhury A, Reduction of frontal impact severity by structural modification, 110-111, Proceedings of Research Scholars' Colloquium, IIEST Shibpur, 23-24 August 2016, 2016
84
S Chaudhuri, K Debnath, Sediment Removal Processes from an Evolving Scour Hole around Bridge Piers in Clay-Sand Mixed Cohesive Sediment, 124, Annual General Meeting of the Geological Society of India, 2016
85
L. Prince Raj, R.S. Myong, Numerical Simulation of Droplet Impingement on a Multi-Element High-Lift Airfoil, International Council of the Aeronautical Sciences, (ICAS 2016), 2016
86
Dutta, P. and Nandi, N, Computational study on the effect of bend curvature on velocity distribution from straight to a 900 pipe bend using k – ? turbulence model, International Conference on Engineering Problems and Application of Mathematics 2016 (EPAM – 2016), 11-12 June, NIT Agartala., 2016
87
Dutta, P. and Nandi, N, On some aspects of change in static pressure distribution from straight to curved pipe due to effect of bend curvature by k – ? turbulence modelling, proceedings of 61st congress of ISTAM, an international conference, December, 11-14, 2016, VITU-Vellore., 2016
88
S.S.R. SUMAN and Nandi, N, Analysis of change in velocity profile with different Mach number and angle of attack in subsonic state of flow for an Airfoil, proceedings of 61st congress of ISTAM, an international conference, December 11-14, 2016, VITU-Vellore., 2016
89
P. Kumar, PC Joshi, and R. Kumar, Thermal decomposition and kinetics studies of AN based green oxidizers for solid rocket propulsion, International conference on alternative energy resources, 2016
90
Subodip Deo and Salil Haldar, Vibration analysis of plates subjected to uniformly distributed mass by using finite element method., 61stCongress of ISTAM, 2016
91
Deb, Briti ; Mukherjee, Indrajit;Srirama, Satish Narayana;Vainikko, Eero, A semantic followee recommender in Twitter using Topicmodel and Kalman filter, 12th IEEE International Conference on Control and Automation (ICCA), Kathmandu, NEPAL, JUN 01-03, 2016
92
K. Barman, K. Debnath, Wave-current turbulent flow over submerged tandem hemispheres, 27, International conference on Hydraulics, water Resources and River engineering (HYDRO), CW & PRS, Pune., 2016
93
K. Barman, K. Debnath, Second order turbulence statistics for wave-current flow, 47, Proceedings of 3rd International Conference on Applications of Fluid Dynamics (ICAFD), IIT- ISM Dhanbad, Jharkhand, India in Association with Fluid Mechanics Group, University of Botswana, Botswana, 2016
94
S. K. Singh, K. Debnath, Turbulent flow dynamic in wave-current co-existing environment, 32, Proceedings of 3rd international Conference on Applications of Fluid Dynamics (ICAFD) ), IIT- ISM Dhanbad, Jharkhand, India in Association with Fluid Mechanics Group, University of Botswana, Botswana., 2016
95
S. K. Singh, K. Debnath, Turbulent characteristics of flow over large regular bottom roughness, 26, Proceedings of 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (HYDRO) Central Water & Power Research Station, Pune, India., 2016
96
S. Chaudhuri, K. Debnath, M. K. Manik, Flume study on contraction scours in clay – sand mixed cohesive bed, 29, HYDRO-16 INTERNATIONAL, 21st International Conference on Hydraulics, Water Resources and River Engineering, CW & PRS., 2016
97
S. Roy, K. Debnath, Vortex synchronization control around partially submerged cylinder due to wave-current combined flow., 31, Proceedings of 21st International conference on Hydraulics, water Resources and River engineering (HYDRO), CW & PRS., 2016
98
S. S. Samantaray, S. Roy, and K. Debnath, Study of turbulent eddies in open channel flow with wave against current, 32, Proceedings of 21st International conference on Hydraulics, water Resources and River engineering (HYDRO), CW & PRS, 2016
99
P. K. Raushan, K. Debnath, K. and S. K. Singh, Development of turbulent boundary layer over a train of rib roughness in the presence of surface wave, 72, Proceedings of the 6th International conference on Fluid Mechanics and Fluid Power (FMFP) MNNIT, Allahabad, U.P. India., 2016
100
J. Chowdhury, S. Ghosh, K. Debnath, Effect of Reynolds number on turbulent flow over open cavity, 63, Proceedings of the 6th International conference on Fluid Mechanics and Fluid Power (FMFP) MNNIT, Allahabad, U.P. India., 2016
101
S. Chaudhuri, K. Debnath M. K. Manik, Study on contraction scours in clay – sand mixed cohesive bed, 72, International conference on Hydraulics, water Resources and River engineering (HYDRO), CW & PRS, Pune, 8-10 Dec. 2016, 2016
102
S. Chaudhuri, K. Debnath, Sediment removal processes from an evolving scour hole around bridge piers in clay-sand mixed cohesive sediment, 124, In book of Abstracts:– International Conference on Developments in Geosciences in the Past Decade – Emerging Trends for the Future and Impact on Society, IIT KGP., 2016
103
Basantia S. K., Md Abu Bakkar, Khutia N., Das D., Simulation of LCF Characteristics of AA6063 Al Alloy under Different Aging Conditions, Volume 2, Issue 4-5, 2015, Pages 2226-2235, Materials Today: Proceedings;Proceedings of 4th International Conference on Materials Processing and Characterzation (ICMPC-2015), 14th to 15th March 2015,GRIET, Hyderabad, 2015
104
P. Kumar, P. C. Joshi, Characteristics of regression rate of catalyzed and uncatalyzed propellants at sub-atmospheric pressures, Proceedings of the National Conference on Internal Combustion Engine Combustion, UPES Dehradun, 2015
105
S. K. Saha, P. Dutta and N. Nandi, Study on flow separation for single phase flow through 900 pipe bend, 234-243, proceedings of International Conference on Current Innovation in Engineering & Technology (ICETER 2015) sponsored by international association of engineering & technology for skill development ,Octobe, 2015
106
P. Dutta, S. K. Saha and N. Nandi, Computational study of turbulent flow in pipe bends, International conference emerging trends in manufacturing, engines and modeling (ICEMEM-2015), NMIMS university, Maharastra, February, 2015
107
P. Dutta, S. K. Saha and N. Nandi, Study on Turbulent Flow Characteristics in Pipe Bends, 58-64, Proceedings of 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI), College of Engineering and Management, Kolaghat, WB, 2-4 January, 2015, Exce, 2015
108
S. Chaudhuri, K. Debnath, M. K. Manik, Flume study on bridge pier scour embedded within long contraction for clay-sand mixed cohesive sediment bed, 89, Proceedings of 20th International conference on Hydraulics, water Resources and River engineering (HYDRO), IIT Roorkee, India., 2015
109
S. K. Singh, K. Debnath, Turbulence over rough-bed using double averaged Navier-Stokes equations, 61, Proceedings of 20th International conference on Hydraulics, water Resources and River engineering (HYDRO), IIT Roorkee, India., 2015
110
K. Barman, K. Debnath, Turbulence flow characteristics over hemispherical obstacles in the presence of surface wave, 76, Proceedings of 20th International conference on Hydraulics, water Resources and River engineering (HYDRO), IIT Roorkee, India., 2015
111
Ghosh, Saurav Kumar and Bhowmik, Joydeep and Das, Debopam, Maneuverability of an Ornithopter and the Effect of Gust: An Experimental Investigation, 10, Proceedings of International Conference on Intelligent Unmanned Systems, 2014
112
Raj, LP and Myong, RS, A FINITE VOLUME METHOD FOR SIMULATION OF SUPERCOOLED LARGE DROPLETS IN ATMOSPHERIC ICING, 171--172, Korean Society for Aeronautical and Space Sciences, 2014
113
Raj, L Prince and Jung, SK and Myong, RS, A FINITE VOLUME METHOD FOR 3-D DROPLET IMPINGEMENT IN SUPERCOOLED LARGE DROPLET ICING CONDITIONS, 267--268, Korean Society for Aeronautical and Space Sciences, 2014
114
A. Roy, R. Roy, Seismic behaviour of R/C elevated water tanks with shaft stagings: Effect of biaxial interaction and ground motion characteristics, 1205-1215, Advances in Structural Engineering, 2014
115
Singh R. B., Khutia N., Dey P.P., Sivaprasad S., Evaluation of uniaxial and multiaxial fatigue of carbon steel through experiment and simulation using advanced kinematic hardening models, Pages 279-282, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2014), Nara, Japan,10th to 13th October, 2014
116
Khutia N., Dey P.P., Sivaprasad S., Modification of Ohno Wang cyclic plasticity model through simulation and experimentation of 304LN stainless steel specimen, Pages 243-246, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2014), Nara, Japan,10th to 13th October, 2014
117
Roy S., Khutia N., Das D., Roy Chowdhury A, FE analysis and deformation behavior of laser based porous Ti6Al4V using static loading condition, Pages 305-307, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2014), Nara, Japan,10th to 13th October, 2014
118
Rana M, Biswas JK, Majumder S, Karmakar SK, Roychowdhury A, Effect of ligaments on range of motion at lumber spine for natural and implanted condition : A finite element study, 80, International Conference on Advanced Materials and Energy Technology, 17-19 December 2014, IIEST, Shibpur, 2014
119
Pradhan R, Roy S, Majumder S, Roychowdhury A, Finite element analysis of hard coated surface on UHMWPE based cervical spine implant, 79, International Conference on Advanced Materials and Energy Technology, 17-19 December 2014, IIEST, Shibpur, 2014
120
Chatterjee S, Majumder S, Roychowdhury A, Homogenization of interfacial strain profile hip –implanted femur by lowering effective stiffness of the implant material, 72, International Conference on Advanced Materials and Energy Technology, 17-19 December 2014, IIEST, Shibpur, 2014
121
Chatterjee S, Banerjee S, Majumder S, Saha S, Roychowdhury A, Customization of hip implants based on geometry and pre-operative physiological condition of bone, T247, 7th World Congress on Biomechanics, 6-11 July 2014, Boston, USA, 2014
122
Pradhan R, Roychowdhury A, Majumder S, Finite element analysis of segmental cervical spine facet strain and disc stress after total disc replacement, 22, National Conference of Biomechanical Sciences, 7-8 March, 2014, Siksha ‘O’ Anusandhan University, Bhubaneswar, 2014
123
Chatterjee S, Banerjee S, Majumder S, Roychowdhury A, Hip implantation: Modelling and analysis, 12, National Conference of Biomechanical Sciences, 7-8 March, 2014, Siksha ‘O’ Anusandhan University, Bhubaneswar, 2014
124
Roychowdhury A, Majumder S, Chatterjee S, Biswas JK, Roy S, Pradhan R, Customization of implant design, International Workshop on Advances in Healthcare Engineering, 2-4 January 2014, College of Engineering and Management, Kolaghat, West Bengal, 2014
125
S. K. Ghosh, S. K. Mukherjea, and B. N. Dutta, “Study of the Effect of Tangential Point Blowing on the Incompressible Boundary Layer Flow around a Circular Cylinder”, Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014, November 14-20, 2014, Montreal, Canada, 2014
126
Brijesh Kumar Pandey and Sujay Kumar Mukherjea, 2. “Aerodynamic Simulation of Evacuated Tube Transport (ETT) Trains with Suction at Tail”, Proceedings of the ASME 2014International Mechanical Engineering Congress & Exposition, IMECE2014, November 14-20, 2014, Montreal, Canada, 2014
127
Piyush Mohapatra, Saurabh Gupta, Jyoti Prakash Panda and Debashis Pal, Computational Analysis Of Liquid-liquid Mixing in a T-shaped Serially Connected Converging-diverging Microchannel, Proceedings of 59th Congress of ISTAM (an International Conference), Dec 17-20, 2014, Alliance University, Bangalore, 2014
128
Piyush Mohapatra, Jyoti Prakash Panda and Debashis Pal, Electro-osmotic Flow and Mixing in a Micro-channel: A Numerical Study, Proceedings of 59th Congress of ISTAM (an International Conference), Dec 17-20, 2014, Alliance University, Bangalore, 2014
129
P. Dutta, S. K. Saha and N. Nandi, Numerical Study of curvature effect on turbulent flow in 900 pipe bend, Proceedings of Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2014), December 29-31, 2014, IIT Kharagpur (ISBN: 978-93-80813-30-1)., 2014
130
A. Santra and N. Nandi, Computational investigation on cavitation phenomenon in nozzle flow, Proceedings of Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2014), December 29-31, 2014, IIT Kharagpur, India (ISBN: 978-93-80813-30-1)., 2014
131
Dutta P, Banerjee S, Santra A and Nandi N, Numerical study on pressure drop characteristics of turbulent flow in pipe bend, 1, 381-386, Aspects of Mechanical Engineering and Technology, NERIST, Arunachal Pradesh, December 2014, Excel India Publication (ISBN: 978-93-83842-95-7)., 2014
132
A. Santra, P. Dutta and N. Nandi, Numerical Modelling & Simulation of Cavitation in a Convergent-Divergent Nozzle, 144-150, Proceedings of 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas, College of Engineering and Management, Kolaghat, WB, December 2014, Excel India Publi, 2014
133
S. Banerjee, P. Dutta and N. Nandi, Numerical Study on Turbulent Swirling Flow Characteristics in a Cylinder, 160-166, Proceedings of 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas, College of Engineering and Management, Kolaghat, WB, December 2014, Excel India Publi, 2014
134
Bhowmik, Joydeep and Raj, Nidhish and Das, Debopam and Abhishek, Abhishek, Measurement and analysis of aerodynamic forces of an Ornithopter in free flight, 10, Proceedings of International Conference on Intelligent Unmanned Systems, 2014
135
Bhaumik ,S., Das, P.K, Response of R/C Asymmetric Community Structures Under Near-Fault Motion, Advances in Structural Engineering, Dynamics, Volume Two, 955-962, Structural Engineering Convention (SEC 2014), An International Meet, 2014
136
Paul, P., Das, P. K., Sarkar, P., Studies on Identifying Critical Joints in RC Framed Building Subjected to Seismic Loading, Advances in Structural Engineering, Dynamics, Volume Two, 977-988, Structural Engineering Convention (SEC 2014), An International Meet, 2014
137
S. K. Singh, K. Debnath, Structure of turbulence flow dynamics over a submerged cube, 29-31, International Conference of Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM), IIT Kharagpur., 2014
138
K. Barman, K. Debnath, Turbulence characteristics in the wake region of single and double in-line hemispherical obstacles in the presence of surface waves, International Conference of Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM), IIT Kharagpur., 2014
139
S. K. Singh, K. Debnath, Laboratory investigation of turbulent flow structure over a submerged cubic obstacle, 14-B-681/23, International conference on Fluid Mechanics and Fluid Power (FMFP), IIT Kanpur, 2014
140
K. Barman, K. Debnath, Effect of Submergence around hemispherical obstacle, International conference on Fluid Mechanics and Fluid Power (FMFP), IIT Kanpur, 2014
141
Roy S., Biswas J., Panda D., Deb A., Bhowmik S., Khutia N., Roy Chowdhury A., Finite element study on crack development of titanium alloy (Ti6Al4V) specimen, Indian Conference on Applied Mechanics, Indian Conference on Applied Mechanics, INCAM-2013, 4th to 6th July, IIT Madras, 2013
142
Das P., Khutia N., Dey P.P., Sensitivity analysis of Chaboche parameter for characterization of cyclic plasticity behavior, International Conference on Computer Aided Engineering (CAE-2013), IIT Chennai, Pages 465-470, 2013
143
Khutia N., Dey P. P., Optimization of input material parameters for Ohno-Wang hardening model using Genetic Algorithm, Pages 574-579, International Conference on Computer Aided Engineering (CAE-2013), IIT Chennai, 19th to 21st December, 2013
144
Sahoo A, Majumder S, Roychowdhury A, Dynamic response of knee-thigh-hip complex in seated posture during frontal impact, 11, 58th Congress of Indian Society of Theoretical and Applied Mechanics (an International Conference)(ISTAM), 18-21 December 2013, BESU, Shibpur, 2013
145
Chatterjee S, Majumder S, Mondal P, Patwari M, Saha B, Bhattacharyya B, Roychoudhury A, Effective stiffness of customized hip implants: Incorporation of cavity, 9, 58th Congress of Indian Society of Theoretical and Applied Mechanics (an International Conference)(ISTAM), 18-21 December 2013, BESU, Shibpur, 2013
146
Roychowdhury A, Biswas JK, Karmakar SK, Majumder S, Banerjee PS, Saha S, Finite element analysis of spinal implant for different bone conditions, screw dimensions and materials, 61, 29th Southern Biomedical Engineering Conference, 3-5 May 2013, Miami, Florida, USA, 2013
147
Sreeja Bibin, S. K. Mukherjea, 3. “Numerical Investigation of Aerodynamic Drag on Vacuum Tube High Speed Train”, Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013, November 13-21, 2013, San Diego, California, USA, 2013
148
Aditya Bandopadhyay, Uddipta Ghosh, Debashis Pal, Kaustav Chaudhury and Suman Chakraborty, Electrokinetic Maneuvering of Bubble-Driven Inertial Micro-Pumping Systems, HMTC 1300127, 22th National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, Dec 28-31, 2013, IIT Kharagpur, India, 2013
149
Saha, S., Dutta, P. and Nandi, N, Study of pressure contours in radial direction for different bend angles, Proceedings of 58th Congress of ISTAM, an international conference held at BESU Shibpur; Howrah, W.B. December, 2013, 2013
150
Dutta, P., Saha, S. and Nandi, N, CFD analysis of single phase flow through 900 bends, Proceedings of 58th Congress of ISTAM, an international conference, held at BESU Shibpur; Howrah, W.B. December, 2013., 2013
151
Nandi N, The change in stress distribution pattern within the earthen dam due to the effect of seepage, 381-393, International Conference on structural Engineering and Mechanics (ICSEM 2013)Paper No: 064, December 20-23, NIT Rourkela, India., 2013
152
Sinha P, Sarkar K, Pandey B and Nandi N, On a few aspects of vortex motion, 80-85, International Conference on Advanced Engineering and Technology (ICAET), 27th January, 2013, Mysore ISBN 9789381693885 , published by Institute for Research and Development India (IRD India)., 2013
153
Dutta P, Saha S and Nandi N, Numerical study for pressure and velocity distribution across the diameter of pipe bends, 154-158, Recent Advances in Mechanical Engineering, NERIST, Arunachal Pradesh, November 2013, Excel India Publication (ISBN: 978-93-82880-71-4), 2013
154
Saha S, Dutta P and Nandi N, CFD analysis of total pressure in radial direction of 900 bend, 185-188, Recent Advances in Mechanical Engineering, NERIST, Arunachal Pradesh, November 2013, Excel India Publication (ISBN: 978-93-82880-71-4), 2013
155
Indrajit Mukherjee; S. N. Omkar, Nonlinear Aero elasticity of Insect like Flapping Wing Structure, In the Proceedings of 4th International Conference on Nonlinear Dynamics NDKhPI- 2013, Sevastopol, Ukraine, June 19-23, 2013
156
Indrajit Mukherjee ; S.N. Omkar, Aeroelastic Response of an Insect like Flapping Wing Structure using a Quasi-Steady Approach, In the Proceedings of 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, USA, April 8-11, 2013
157
4. Bhaumik, S. and Das, P. K., Response of Idealized R/C Asymmetric Structural Systems under Near-fault Ground Motion, 58-istam-sm-fp-43, 58TH Congress of The Indian Society of Theoretical and Applied Mechanics (ISTAM), An International Meet, 2013
158
S. Roy, K. Debnath, Turbulent statistics of combined wave current flow over a plane bed., 51, In book of Abstracts: International Conference on Indian Society of Theoretical and Applied Mechanics (ISTAM-2013, IIEST (Formerly BESU), Shibpur, India., 2013
159
I. Dutta , K. Debnath, Flow Within Channel Contractions, 29, In book of Abstracts: International Conference on Indian Society of Theoretical and Applied Mechanics (ISTAM-2013), 18-21 Dec., 2013, IIEST (Formerly BESU), Shibpur, India., 2013
160
M. K. Manik, K. Debnath, Scour within long contractions within channels in cohesive sediment bed, 50, In book of Abstracts: International Conference on Indian Society of Theoretical and Applied Mechanics (ISTAM-2013), IIEST (Formerly BESU), Shibpur, India., 2013
161
S. Chaudhuri, K. Debnath, K. and M. K. Manik, Experimental stydy on local scour around vertical wall abutment in clay sand mixed cohesive sediment, 51, In book of Abstracts: – 58th Congress of the Indian Society of Theoretical and Applied Mechanics (ISTAM), IIEST, Shibpur., 2013
162
S. K. Singh, K. Debnath, Study of Turbulence Flow Characteristics over Surface Mounted Cubic Obstacles in a Tandem arrangement, 49, In book of Abstracts: International Conference on Indian Society of Theoretical and Applied Mechanics (ISTAM-2013), 18-21 Dec., 2013, IIEST (Formerly BESU), Shibpur, India., 2013
163
K. Barman, K. Debnath, Turbulence characteristics in the wake region of single and double in-line hemispherical obstacles., 50, In book of Abstracts: International Conference on Indian Society of Theoretical and Applied Mechanics (ISTAM-2013), 18-21 Dec., 2013, IIEST (Formerly BESU), Shibpur, India., 2013
164
S. Chaudhuri, K. Debnath, Observations on scouring processes within evolving scour hole around cylinders embedded in clay-sand mixed cohesive sediments., 258-264, In book of Abstracts: – Indo-U.S International bilateral workshop on ‘Sedimentation, Erosion, flooding, and Ecological Health of Rivers’ Indian Statistical Institute, Kolkata., 2013
165
Ghosh, Saurav Kumar and Bhowmik, Joydeep and Das, Debopam, Aerodynamics of a flapping wing mav: an experimental study, 8, Proceedings of International Conference on Intelligent Unmanned Systems, 2012
166
Raj, L Prince and Rejith, P and Balu, R, Numerical simulation of a hot gas injection thrust vector control system performance, 38, 1745--1749, Procedia Engineering, 2012
167
Roy, S., Khutia, N., Roy Choudhury, A., Weight and Natural Frequency Optimization of Automotive Engine Oil Sump Using Fibre Reinforced Composite Laminates, Third Asian Conference on Mechanics of Functional Materials and Structures, 2012 (ACMFMS 2012) held at IIT Delhi, 2012
168
Roy, S., Panda, P., Deb, A., Bhowmick, S., Khutia, N., Roy Choudhury, A., Response of the effective modulus for different percentage of pore volume and pore size, Indian Society of Theoretical and Applied Mechanics, 2012 (ISTAM 2012) held at DIAT, Pune, 2012
169
Roy, S., Panda, P., Deb, A., Bhowmick, S., Khutia, N., Roy Choudhury, A., Response of the effective modulus for different percentage of pore volume and pore size, Indian Society of Theoretical and Applied Mechanics, 2012 (ISTAM 2012) held at DIAT, Pune, 2012
170
Dey S, Biswas JK, Chatterjee S, Majumder S, Roychowdhury A, Design & simulation of lumber artificial intervertebral disc, 414–420, International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas, 27-28 December 2012, College of Engineering and Management, Kolaghat, West Bengal, 2012
171
Chatterjee S, Ghosh UB, Majumder S, Roychowdhury A, Optimization of design & material property of customized hip replacement prosthesis, 163-168, 57th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), 17-20 December 2012, Defence Institute of Advanced Technology, Pune, 2012
172
Biswas JK, Karmakar S, Majumder S, Roychowdhury A, Spinal implant design for lower vertebra through finite element studies, 97-104, 57th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), 17-20 December 2012, Defence Institute of Advanced Technology, Pune, 2012
173
Roychowdhury A, Biswas JK, Majumder S, Karmakar SK, Saha S, Dimensional & material optimization of implants for fusion of lumber spine, World Congress on Medical Physics and Biomedical Engineering, 26-31 May 2012, Beijing, China, 2012
174
Roychowdhury A, Majumder S, Chatterjee S, Ghosh UB, Saha S, Pal S, Application of CAD/CAM in implant manufacturing, International Workshop on Tools, Implants and Biomaterial, 17-18 May 2012, Institute of Fuel Research and Development, Dhaka, Bangladesh, 2012
175
P. Kumar, Application of mathematical tools for predicting the burning rate of solid propellant: A review, National conference on recent trends in mathematics and their applications, VBU, Hazaribagh, 2012
176
Sinha P, Sarkar K, Pandey B and Nandi N, An experimental study on vortex motion, 122-129, International Conference on Advances in Mechanical Engineering and Its Interdisciplinary Areas (ICAMEI), 27-28 December, 2012 (ISBN 9789382062790)., 2012
177
Mahapatra P, Saha S, Roy S and Nandi N, Experimental study on flow characteristics and Froude number with the help of a flow visualization experiment, 130-134, International Conference on Advances in Mechanical Engineering and Its Interdisciplinary Areas (ICAMEI), 27-28 December, 2012(ISBN 9789382062790)., 2012
178
Biswas JK, Karmakar S, Banerjee PS, Majumder S, Roychowdhury A, Optimization of spinal implant screw for lower vertebra, 46, International Conference on Biomaterials and Implants: Prospects and Possibilities in the New Millennium, 21-23 July 2011, CGCRI, Kolkata, 2011
179
P. Kumar, P.C. Joshi, Combustion studies of solid propellants at sub-atmospheric pressure, National multi-conference on contemporary global trends in technology and management, LNCT Indore, 2011
180
Bhowmik, Joydeep and Das, Debopam, Development of a flapping wing MAV based on an efficient design of a wing with twist, 7, Proceedings of International Conference on Intelligent Unmanned Systems, 2011
181
Indrajit Mukherjee ; S. N. Omkar, An analytical model for the aeroelasticity of insect flapping, Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2011
182
K. Debnath, S. Chaudhury, B. P. Mukhopadhyay, Volume of Scour around Circular Cylinder in Clay-Sand Mixed Beds, 7-14, In book of Abstracts, HYDRO-2009, 2009, Indian Society for Hydraulics, 2010
183
S.Chaudhury, K. Debnath, Observations on Scouring Processes within Evolving Scour Hole around Cylinders Embedded in Clay-Sand Mixed Cohesive Sediments, Indo-US Bilateral Workshop on "Sedimentation, Erosion, Flooding, and Ecological Health of Rivers", ISI, Kolkara 1-3 November 2010, 2010
184
K. Debnath, V. Nikora, On threshold of cohesive sediment erosion, Indo-US Bilateral Workshop on "Sedimentation, Erosion, Flooding, and Ecological Health of Rivers". ISI, Kolkata, 1-3 November 2010, 2010
185
Chatterjee S, Majumder S, Pal S, Total soft socket for below knee prosthesis: A comparative study, 23, National Conference of Indian Society of Biomechanics, 18-19 December 2010, Institute of Medical Sciences & SUM Hospital, Bhubaneshwar, 2010
186
Sahoo A, Majumder S, Roychowdhury A, Frontal impact tolerance of human pelvis, 22, National Conference of Indian Society of Biomechanics, 18-19 December 2010, Institute of Medical Sciences & SUM Hospital, Bhubaneshwar, 2010
187
Roychowdhury A, Sahoo A, Majumder S, Kumar S, Saha S, Experimental studies of frontal impact on human pelvis, 384, 6th World Congress on Biomechanics, 1-6 August 2010, National University of Singapore, Singapore, 2010
188
Majumder S, Roychowdhury A, Pal S, Studies on hip fracture during sideways fall with anthropometric variations using 3D finite element simulations, 297, 6th World Congress on Biomechanics, 1-6 August 2010, National University of Singapore, Singapore, 2010
189
Majumder S, Roychowdhury A, Pal S, Effects of variation of impact energy on pelvis-femur-soft tissue complex: 3D finite element simulations of automotive side impacts, 297, 6th World Congress on Biomechanics, 1-6 August 2010, National University of Singapore, Singapore, 2010
190
Ghosh S, Majumder S, Pal S, Development of a dynamometer to measure the punching force for boxers and its validation with CT-based FE analysis of the hand-fist complex, 31, 167-170, IFMBE-2010 Proceedings (Springer), 2010
191
Roychowdhury A, Majumder S, Sarkar S, Ghosh UB, Saha S, Pal S, Application of the finite element method in the orthopaedic and impact biomechanics, 19, All India Seminar on Intervention of Mechanical Engineering in the Development of Health Care System, 20-21 May 2010, Institute of Engineers (India), Kolkata, 2010
192
S. K. Ghosh, S. K. Mukherjea, and B. N. Dutta, 4. “Numerical Study of the Flow in the Wake of an Impulsively Started Rotating and Translating Circular Cylinder”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition, IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada, 2010
193
Indrajit Mukherjee, Stability analysis of periodic solutions for a class of fractionally damped system of engineering interest, In the proceedings of 3rd International Conference on Nonlinear Dynamics, NDKhPI- 2010, Kharkov, Ukraine, September 21-24, 2010, 2010
194
Nandi, N. and Roychowdhury A, Effect of soil-structure interaction on seismic behavior of earthen dams, 802-804, International Conference of Theoretical Applied Computational and Engineering Mechanics (ICTACEM), IIT Kharagpur, 2010, 2010
195
Das, P. K., Chakroborty, S., Roy, R., Seismic Behaviour of Torsionally Unbalanced Structures: A Unified Approach, Int. Conf. of Challenges and Applications of Mathematics in Science and Technology (CAMIST), 2010
196
Ghosh S, Majumder S, Pal S, Development of a dynamometer to determine the punching force of the boxers and its comparison with CT scan based finite element simulations, National Conference of Biomechanics, 7-8 March 2009, IIT, Roorkee, 2009
197
Majumder S, Roychowdhury A, Pal S, Effectiveness of a foam type hip pad in reduction of hip fracture: a 3D finite element study, 41(S1), S453, 16th Congress of the European Society of Biomechanics, 6-9 July 2008, Switzerland & Journal of Biomechanics (Elsevier Science), 2008
198
Mondal, S., Nandi, N., and Pal, D, Study of incompressible fluid flow past a square cylinder in viscous media, 19-22, Conference on Advancements and Futuristic trends in Mechanical Engineering (AFTME 08) at Atmiya Institute of Technology and Science, Rajkot, November 2008, 2008
199
D Plew, K Debnath, J Aberle, V Nikora, G Cooper, In situ flume for studying cohesive and non-cohesive sediment erosion, 32, 70, Proceedings of the Congress-International Association for Hydraulic Research, 2007
200
S. K. Ghosh, S. Halder, S. K. Mukherjea, B. N. Dutta, 5. “Flow simulation around a circular cylinder using higher order fractional step”, 34th National conference on Fluid Mechanics and Fluid Power, 10-12 December, 2007, Birla Institute of Technology, Mesra,Ranchi,India., 2007
201
Majumder S, Roychowdhury A, Pal S, Fracture analysis of pelvis-femur complex under different fall conditions, A41-A42, 52nd Annual Conference of Indian Orthopaedic Association, 3-8 December 2007, Kolkata, 2007
202
S. K. Ghosh, S. Halder, S. K. Mukherjea, B. N. Dutta, 6. “Numerical simulation of flow past a translating and rotating circular Cylinder”, 1st Asian Symposium on Computational Heat Transfer and Fluid Flow, 18-21 October,2007, Xi’an,China, 2007
203
Indrajit Mukherjee; B.K. Raghuprasad, Localization induced vibration isolation in fractionally damped nonlinear systems, In the Proceedings of ASME International Design Engineering and Technical Conference, Las Vegas, Nevada, September 4-7, 2007 (Paper No. : DETC-34348)., 2007
204
Indrajit Mukherjee; B.K. Raghuprasad, Localization induced vibration isolation in hysteretically damped nonlinear systems, In the Proceedings of “NONLINEAR DYNAMICS – 2007, 2nd International Conference organized by National Technical University, "Kharkov Polytechnic Institute", Kharkov, Ukraine, September 25- 28, 2007, 2007
205
K. Debnath, V. I. Nikora, A new instrument for measurement of cohesive sediment erosion, re-suspension and bed load from field experiments, Proceedings of International Conference on Applications of Fluid Mechanics in Industry and Environment, August 28-31, 2006, ISI, Kolkata, India, 2006
206
V. I. Nikora, S.Learned, K. Debnath, G. Cooper, M.Reid, N.Nikora, Effects of aquatic and bank vegetation on hydraulic performance of small urban streams, Proceedings of River Flow 2006, 6-8 September 2006, Lisbon, Portugal., 2006
207
V Nikora, S Larned, K Debnath, G Cooper, M Reid, N Nikora, Effects of aquatic and bank-side vegetation on hydraulic performance of small streams., 639--646, River Flow 2006: Proceedings of the International Conference on Fluvial Hydraulics, Lisbon, Portugal, 6-8 September 2006, 2006
208
Majumder S, Roychowdhury A, Pal S, Finite element of pelvis during a backward fall, 39(S1), S536, 5th World Congress on Biomechanics, 29 July - 4 August 2006, Germany & Journal of Biomechanics (Elsevier Science), 2006
209
S. K. Ghosh, S. Halder, S. K. Mukherjea, B. N. Dutta,, 7. Numerical study of temporal variation of stagnation and separation points of an impulsively started circular cylinder”, 33rd National & 3rd International Conference on Fluid Mechanics and Fluid Power, 7-9 December,2006, IIT Bombay,Mumbai,India., 2006
210
S. K. Ghosh, S. Halder, S. K. Mukherjea, B. N. Dutta, 8. “Numerical Simulation of Oscillating Circular Cylinder subjected to High Rotational Amplitude” ., 9th Annual CFD Symposium, CFD Division of AeSI, 11-12th August, 2006, Bangalore,India, 2006
211
Singha S., Sinhamahapatra K.P. and Mukherjea S. K., 9. “Study of incompressible Separated Flow under the Action of Magnetohydrodynamic Forces”, Proceedings of the 8th Annual CFD Symposium, National Aerospace Laboratories, Bangalore, pp. CP 33 (1 – 10), 2006
212
M. Bhattacharyya & B. Bhattacharyya, Forensic Biomechanics and its purview, National Conference on Biomechanics-2006, 2006
213
S. K. Ghosh, S. Halder, S. K. Mukherjea, B. N. Dutta, 10. “Simulation of the flow behind a rotary oscillating circular cylinder using higher order differencing scheme”, 32nd National Conference on Fluid Mechanics and Fluid Power, 15-17 December 2005, Osmanabad, Maharashtra,India, 2005
214
Nandi, N., Dutta, S, C. and Roychowdhury, A, Effect of soil-structure interaction on stress distribution of earthen dams, 326-333, International Conference on Structural and Road Transportation Engineering (START 05), 3-5 January, 2005, IIT Kharagpur, 2005
215
K. Debnath, V. I.Nikora, C. Grace, Cohesive sediment erosion in Canturbury streams, 43-44, In: Book of Abstracts of the New Zealand Hydrological Society Symposium “Hydrology and the Community”, Queenstown, New Zealand, 2004
216
Debashis Pal and Supriya Sarkar, Unsteady Rotational Behaviour of Two Immiscible Liquids Contained in a Vertical Cylinder: A Numerical Study Using VOF Model, 31st National Conference on Fluid Mechanics and Fluid Power, Dec 16-18, 2004, Jadavpur University, Calcutta, India., 2004
217
Daripa R, Majumder S, Roychowdhury A, Quadery SR, Kumar R, Stress analysis of human elbow joint fitted with linked and unlinked prosthesis, 91-99, National Conference on Biomechanics, 19-21 November, 2004, IIT, Delhi, 2004
218
Majumder S, Roychowdhury A, Pal S, Simulation of accidental fall on the floor with the help of a three-dimensional finite element model of human pelvis, 11–19, National Conference on Biomechanics, 19-21 November, 2004, IIT, Delhi, 2004
219
Daripa R, Majumder S, Roychowdhury A, Finite element analysis of total elbow prosthesis, 193, 5th Combined Meeting of Orthopedic Research Societies of the Canada, USA, Japan and Europe, 10-13 October 2004, Alberta, Canada, 2004
220
Daripa R, Majumder S, Roychowdhury A, Dynamic analysis of artificial elbow joint with finite element method, 5th Triennial International Hand & Wrist Biomechanics Symposium, 7 September 2004, New York, 2004
221
S. K. Ghosh, S. K. Mukherjea, B. N. Dutta, 11. “Stability Analysis of Incompressible Viscous Flow Past A Rotating Infinite Circular Cylinder”, 31st National Conference on Fluid Mechanics and Fluid Power, 16-18 December 2004, Kolkata, India, 2004
222
Majumder S, Roychowdhury A, Pal S, A finite element study on the behavior of human pelvis under impact through car door, 196-203, 1st International Conference on ESAR (Expert Symposium on Accident Research), 3-4 September 2004, Hannover Medical School, Germany, 2004
223
Majumder S, Roychowdhury A, Pal S, Chatterjee ND, Sarkar S, Bone mineral and strength estimation from CT scan image of cancellous bone, 6, Mid Term Conference of West Bengal Orthopaedic Association, 11 July 2004, Kolkata, 2004
224
Pal S, Majumder S, Sarkar S, Roychowdhury A, Chatterjee D, Reconstruction of 3D images from CT scans for realistic finite element analysis, 21, 2nd International Conference on Medical Diagonstic Techniques and Procedures, 1-3 April 2004, IIT, Chennai, 2004
225
Majumder S, Roychowdhury A, Pal S, Finite element analysis to determine fracture threshold for human pelvic bone, 22, Seminar on Advances in Mechanics of Solids with Special Emphasis on Fracture Mechanics, 11-12 March 2004, University of Calcutta, Kolkata, 2004
226
9. Roy, R., Das, P. K., Chowdhury, R., Dutta, S. C., Adequacy of Existing Seismic Torsional Provisions: A Critical Review with Recommendations, 337-347, World Congress on Natural Disaster Mitigation, 2004
227
C. Grace, K. Debnath, V. I. Nikora, J. Bulleid, S. De Li ma, J. Aberle, D. Humphreys, New NIWA in-situ sediment flume, 43-44, Book of Abstracts of the New Zealand Hydrological Society Symposium “Hydrology and the Community”, Taupo, New Zealand, 2003
228
Nandi, N. and Dutta, S. C, A Study on Shear failure of Earthen Dams, 636-647, International conference on SEC at IIT, Kharagpur, 12-14th December 2003, 2003
229
Das, P. K., Dutta, S. C., Inelastic Seismic Behaviour of R/C Structures with Bi-directional Asymmetry under Near-fault Motion, 475-483, Structural Engineering Convention (SEC 2003), An International Meet, 2003
230
A. K. Bhattacharya, K. Debnath, A review of turbulence and its modelling, In book of Abstracts: BSME ASME International Conference on Thermal Engineering, Dhaka, Bangladesh, 2002
231
Majumder S, Roychowdhury A, Pal S, Stress analysis of pelvic bone for maximum and minimum load during walking - a three-dimensional finite element approach, 54, 13th National Conference on Biomedical Materials, 20-21 December 2002, Jadavpur University, Kolkata, 2002
232
Sarkar S, Majumder S, Roychowdhury A, Stress analysis of human head under static load using finite element method, 52, 13th National Conference on Biomedical Materials, 20-21 December 2002, Jadavpur University, Kolkata, 2002
233
Dey, S and Debnath, K, An overview on sediment threshold., 8, ACE 2002: International Conference on Advances in Civil Engineering, 2002
234
Nandi, N. and Dutta, S. C, Changing Upstream Slopes: A Possible Way to Avoid Seismic Failure due to Tension Zone at Crest of Earthen Dams, 77-90, National Seminar on Multisectorial role of Architecture and Engineers, IPS Academy Indore, 26-28th December 2002, 2002
235
Nandi, N. and Dutta, S. C, Tension at Crest: A Possible Reason of Seismic failure of earthen Dams, 1000-1007, 12th International Symposium of Earthquake Engineering, IIT Roorkee, 16-18th December 2002, 2002
236
Dutta, S.C., Sarkar, P. and. Nandi, N, An Example based study of behaviour of earthen embankments, 69-81, National seminar on RECENT CHALLENGES OF CIVIL ENGINEERS, Hyderabad, 21-22nd June 2002, 2002
237
Bhattachariya, A. K., Nandi, N. and Roy, S, Role of ground water in some villages of west Bengal-a case study, National seminar on RECENT CHALLENGES OF CIVIL ENGINEERS, Hyderabad, June 2002., 2002
238
Das, P. K., Dutta, S. C., Seismic Behaviour of Code Designed Bi-directionally Asymmetric System, 117-128, National Seminar on Multisectorial Role of Architects and Engineers for Earthquake Disaster, 2002
239
Das, P. K., Dutta, S. C., Seismic Vulnerability of Low-rise Asymmetric Buildings due to Degradation of R/C Structural Elements, 1298-1306, Twelfth Symposium on Earthquake Engineering, 2002
240
Das, P. K., Dutta, S. C., Speciality in Seismic Behaviour of Reinforced Concrete Structures with Bi-Directional Asymmetry, 69-79, National Seminar on Role of IT in Fire and Disaster Management, 2002
241
B. Bhattacharyya & S. Chakraborty, Response Sensitivity Analysis of Soil-Pile System under Random Earthquake, 495 – 303, Proceedings of 12th Symposium on Earthquake Engineering, Roorkee, 2002
242
M. Kundu & B. Bhattacharyya, Standing Upto Earthquakes: Some Measures from Architectural Perspective, 01 – 12, Proceedings of All India Inter Science, Technology and Engineering College Academic Meet, 2002., 2002
243
Majumder S, Roychowdhury A, Pal S, Finite element analysis of a three-dimensional pelvic model, 42-47, 46th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM) (an International Meet), 19-22 December 2001, Regional Engineering College, Hamirpur, 2001
244
Nandi, N., Sarkar, P. and Dutta; S.C, Study of Behaviour of A Few Indian Dams and Embankments, International Conference of Theoretical Applied Computational and Engineering Mechanics, IIT Kharagpur, Dec 2001: paper 25., 2001
245
Salil Haldar, Dipak Sengupta and Abdul Hamid Sheikh., ‘Free vibration analysis of cylindrical shell panels by finite element method, V 161, 228-240, Structural Engineering Convention, An International Meet, 2001
246
Das, P. K., Dutta, S. C., Simplified Hysteresis Models to Recognize Progressive Damage of R/C Asymmetric Buildings under Seismic Torsion, 219-227, National Symposium on Advances in Structural Dynamics and Design (ASDD), 2001
247
Das, P. K., Dutta, S. C., Seismic Behaviour of Bi-directionally Asymmetric Structures, 704-713, Structural Engineering Convention (SEC 2001) An International Meet, 2001
248
Salil Haldar, Dipak Sengupta and Abdul Hamid Sheikh, Flexural vibration of thick-thin plates using a high precision triangular mindlin plate element free from locking, International Conference on Mathematical Modelling, held in Roorkee, January, 2001, 2001
249
A. Chaudhuri, B. Bhattacharyya & S. Chakraborty, Sensitivity analysis of structures subjected to random earthquake, 686 – 693, Proceedings of Structural Engineering Convention – An International Conference, 2001
250
B. Bhattacharyya & S. Chakraborty, Perturbation-based Stochastic sensitivity of Piles subjected to Random Ground Motion, Proceedings of International Conference on Theoretical, Applied, Computational and Experimental Mechanics, IIT (KGP), 2001., 2001
251
Das, P. K., Dutta, S. C., Controlling Deterioration of RC Asymmetric Buildings under Seismic Loadings, 295-303, ICI-Asian Conference on Ecstasy in Concrete, 2000
252
Das, P. K., Dutta, S. C., Inelastic Behaviour of Bi-Directionally Eccentric Street-Corner Buildings under Spectrum Consistent Seismic Excitation,, 245-255, Recent Challenges in Civil Engineering (RCCE-2002), 2000
253
Salil Haldar, Dipak Sengupta and Abdul Hamid Sheikh, A high precision shear flexible locking free element for the analysis of plates of different shapes, Structural Engineering Convention, An International Meet, held in IIT, Bombay, 2000
254
S. Dey, H. K. Dey Sarkar, K. Debnath, Sediment threshold on stream-wise bed slopes, 255-262, Proc. 26th National Conference on Fluid Mech. and Fluid Power, IIT, Kharagpur, 1999
255
Dasgupta, A., Bhattachariya, A.K., Nandi, N. and Banerjee, S, Surface Water and Ground Water Quality of Hooghly District, National conference on Hydrology, Jadavpur, 1999., 1999
256
Patra, A.K., Nandi, N. and Guha, S, Beach Erosion –Model Study and Some Prototype Data of Digha Sea Beach and Its Protection, National Conference on Hydrology, Jadavpur, 1997., 1997
257
Patra, A.K. and Nandi, N, Bank Erosion and Its Protection in Tidal and In Mighty Alluvial Rivers, Proceedings of workshop on River Hydraulics, B.E.College (D.U), 1995., 1995
258
Nandi, N. and Dasgupta, A., Control of Salt Water Intrusion through Horizontal Porous Pipe, Proceedings of Water Resources Day, B. E. College (D.U), 1992., 1992
259
S. Mukherjee and G. Bandyopadhyay, 12. “Separated Flow about Bluff Bodies”, 3rd National Conference on Aerodynamics, 27-28 November 1987, IIT, Bombay, 1987