Pre-loader

Niloy Khutia

About


Dr. Niloy Khutia is presently working as Associate Professor in the Department of Aerospace Engineering and Applied Mechanics,Indian Institute of Engineering Science and Technology, Shibpur, Howrah, West Bengal, India. He had joined the Institute in 2006. Previously, Dr. Khutia had worked as Senior Engineer, FEA at Cummins Research & Technology India Ltd. (CRTI), Pune, India, an Automobile Engine Manufacturer (R&D Centre) from 2004 to 2006, Deputy Manager,CAE in Mahindra Engineering Services (MES), an Engineering Service in Design and R&D at Mumbai,India from 2003 to 2004, Deputy Manager, Hydraulic Design, R&D at Mahindra and Mahindra Ltd.,Mumbai from 2000 to 2003. Since the inception of Under Graduate course in Aerospace Engineering at the Department in 2010, Dr. Khutia has been actively engaged in the development of course structure, syllabus and laboratories in this engineering discipline. He is at present Chairman, Department Training and Placement Committee (DTPC).

The research areas of Dr. Khutia includes plasticity,fatigue and fracture,constitutive modelling of materials in micro and macroscales in for the engineering structures related to aerospace and mechanical engineering and also in bio-material engineering applications. The major thrust area of research work of Dr. Khutia is towards development of a robust, unified simulation model to determine cyclic plastic deformation characteristics i.e. Low Cycle Fatigue, Ratcheting characteristics and damage of the materials used in Indian nuclear power plant for Primary Heat Transport Piping application under various proportional and nonproportional loadings. These models have been used for assessment of safety and prediction of the life of these structures after experimental validation. Dr. Khutia has developed microscale model for finite element simulation of prothesis in biomedical applications to predict mechanical strength, bone remodelling characteristics of implant manufactured through additive manufacturing techniques. The research group of Dr. Khutia has been working towards mechanical characterization of additively manufactured aerospace materials through experiments and numerical simulation through CPFEM modelling. His research group has been working on fabrication and modelling of CNT reinforced nanocomposite for aircraft structures. Four (04) scholars of Dr. Khutia have completed their Ph.D. and Two (02) scholars have submitted their PhD thesis. He has also supervised 11 Post Graduate thesis. Dr. Khutia has published 55 international journals and conference papers.

Academic Qualifications


  • Ph.D. (Mechanical Engineering, IIEST, Shibpur)
  • M.Tech (Mechanical Engineering, IIT Kharagpur)
  • B.E. (Mechanical Engineering, Jalpaiguri Govt. Engineering College)

Research Statement


  • Constitutive Modelling of Materials in Micro and Macroscale
  • Plasticity, Fatigue and Fracture
  • Damage Mechanics
  • Bio Materials
  • CNT based Nanocomposite
  • Multiscale Modelling
  • Finite Element Analysis
  • Crystal Plasticity based Finite Element Method

Latest Publications


  • 1 Das P., Khutia N., Dey P.P., Arora P., Gupta S.K., Multi-objective cyclic plastic modelling of cyclic hardening and softening characteristics of nuclear piping SA333 gr. 6 carbon steel, 180, 108082, International Journal of Fatigue, Elsevier, Science Citation Index (SCI) Journal, Impact Factor 6.0, DOI: https://doi.org/10.1016/j.ijfatigue.2023.108082, 2023
  • 2 Das P., Halama R., Natarajan A.V., Khutia N., Dey P.P., Kunická L., Hajnyš J., Kocich R., Sari F., Constitutive modelling and damage prediction of AlSi10Mg alloy manufactured by SLM technology with emphasis on ratcheting in LCF regime, 181, 108115, International Journal of Fatigue, Elsevier, Science Citation Index (SCI) Journal, Impact Factor 6.0, DOI: https://doi.org/10.1016/j.ijfatigue.2023.108115, 2023
  • 3 Pandey V., Arora P., Gupta S. K., Khutia N., Dey P. P., Validating cyclic plasticity material model for three materials subjected to asynchronous axial-torsion conditions, 181, 108124, International Journal of Fatigue, Elsevier, Science Citation Index (SCI) Journal, Impact Factor 6.0, DOI: https://doi.org/10.1016/j.ijfatigue.2023.108124, 2023
  • 4 P. Das, N. Khutia , P.P. Dey, Punit Arora, and Suneel K. Gupta, Damage-Coupled Cyclic Plasticity Model for Prediction of Ratcheting–Fatigue Behavior under Strain and Stress Controlled Ratcheting for Two Different Nuclear Piping Steels, Journal of Materials Engineering and Performance, Springer, Science Citation Index Expanded (SCIE) Journal, Impact Factor 2.3, DOI: 10.1007/s11665-023-08754-z, 2023
  • 5 G Shinde,S Garai,S Shrivastav, N Khutia, Flight Dynamics Modelling and Control of Flexible Wing Unmanned Aerial Vehicle, Symposium on Applied Aerodynamics and Design of Aerospace Vehicle, Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2023), February 09 -11, 2023, Hyderabad, India, 2023
  • 6 Chakrabarty A., Sahu, R., Kumar A., Bar H.N. , Hitzler L., Khutia N., Finite Element evaluation of fracture toughness and crack propagation in LB-PBF AlSi10Mg, 35, 677–697, Continuum Mechanics and Thermodynamics,Springer, Science Citation Index (SCI) Journal, Impact Factor 2.6, D.O.I.: https://doi.org/10.1007/s00161-023-01206-y, 2023
  • 7 Chakrabarty A., Chakraborty P., Jain R., Sahu V. K., Gurao N.P., Bar H.N. , Khutia N., Influence of scanning and building strategies on the deformation behavior of additively manufactured AlSi10Mg: CPFEM and Finite Element studies, 29, Metals and Materials International, Springer, D.O.I.: https://doi.org/10.1007/s12540-023-01418-6, Science Citation Index Expanded (SCIE) Journal, Impact Factor 3.5, 2023
  • 8 Pandey V., Arora P., Gupta S. K., Khutia N. , Dey P. P., An improved strain path dependent model under multiaxial cyclic loading for simulating material response of low C-Mn steel, 167 (Part A),, 107322, International Journal of Fatigue, Elsevier, Science Citation Index (SCI) Journal, Impact Factor 6.0, DOI: https://doi.org/10.1016/j.ijfatigue.2022.107322, 2023
  • 9 Basantia S.K., Bakkar M.A., Bhattacharya A. , Das D., Khutia N., Predicting macro- and microscopic responses of dual-phase steels under low cycle fatigue based on multi-scale finite element methods, 32, Pages 3298–3321, Journal of Materials Engineering and Performance, Springer, DOI: https://doi.org/10.1007/s11665-022-07298-y, Science Citation Index Expanded (SCIE) Journal, Impact Factor 2.3, 2022
  • 10 K. Bhowmik, H. Ambati, N. Khutia, A. Roy Chowdhury, Prediction of Elastic Constants of Spiral MWCNT Reinforced Nanocomposites by Finite Element Analysis, 37, 449–458, In: Maiti D.K. et al. (eds) Recent Advances in Computational and Experimental Mechanics, Vol–II, Lect. Notes Mech. Eng., Springer, 2022
  • View More

    Research Areas


    • Crystal Plasticity based Finite Element Method
    • Finite Element Analysis
    • Multiscale Modelling
    • CNT based Nanocomposite
    • Bio Materials
    • Damage Mechanics
    • Plasticity, Fatigue and Fracture
    • Constitutive Modelling of Materials in Micro and Macroscale

    Publications


  • 1 Das P., Khutia N., Dey P.P., Arora P., Gupta S.K., Multi-objective cyclic plastic modelling of cyclic hardening and softening characteristics of nuclear piping SA333 gr. 6 carbon steel, 180, 108082, International Journal of Fatigue, Elsevier, Science Citation Index (SCI) Journal, Impact Factor 6.0, DOI: https://doi.org/10.1016/j.ijfatigue.2023.108082, 2023
  • 2 Das P., Halama R., Natarajan A.V., Khutia N., Dey P.P., Kunická L., Hajnyš J., Kocich R., Sari F., Constitutive modelling and damage prediction of AlSi10Mg alloy manufactured by SLM technology with emphasis on ratcheting in LCF regime, 181, 108115, International Journal of Fatigue, Elsevier, Science Citation Index (SCI) Journal, Impact Factor 6.0, DOI: https://doi.org/10.1016/j.ijfatigue.2023.108115, 2023
  • 3 Pandey V., Arora P., Gupta S. K., Khutia N., Dey P. P., Validating cyclic plasticity material model for three materials subjected to asynchronous axial-torsion conditions, 181, 108124, International Journal of Fatigue, Elsevier, Science Citation Index (SCI) Journal, Impact Factor 6.0, DOI: https://doi.org/10.1016/j.ijfatigue.2023.108124, 2023
  • 4 P. Das, N. Khutia , P.P. Dey, Punit Arora, and Suneel K. Gupta, Damage-Coupled Cyclic Plasticity Model for Prediction of Ratcheting–Fatigue Behavior under Strain and Stress Controlled Ratcheting for Two Different Nuclear Piping Steels, Journal of Materials Engineering and Performance, Springer, Science Citation Index Expanded (SCIE) Journal, Impact Factor 2.3, DOI: 10.1007/s11665-023-08754-z, 2023
  • 5 Chakrabarty A., Sahu, R., Kumar A., Bar H.N. , Hitzler L., Khutia N., Finite Element evaluation of fracture toughness and crack propagation in LB-PBF AlSi10Mg, 35, 677–697, Continuum Mechanics and Thermodynamics,Springer, Science Citation Index (SCI) Journal, Impact Factor 2.6, D.O.I.: https://doi.org/10.1007/s00161-023-01206-y, 2023 6 Chakrabarty A., Chakraborty P., Jain R., Sahu V. K., Gurao N.P., Bar H.N. , Khutia N., Influence of scanning and building strategies on the deformation behavior of additively manufactured AlSi10Mg: CPFEM and Finite Element studies, 29, Metals and Materials International, Springer, D.O.I.: https://doi.org/10.1007/s12540-023-01418-6, Science Citation Index Expanded (SCIE) Journal, Impact Factor 3.5, 2023
  • 7 Pandey V., Arora P., Gupta S. K., Khutia N. , Dey P. P., An improved strain path dependent model under multiaxial cyclic loading for simulating material response of low C-Mn steel, 167 (Part A),, 107322, International Journal of Fatigue, Elsevier, Science Citation Index (SCI) Journal, Impact Factor 6.0, DOI: https://doi.org/10.1016/j.ijfatigue.2022.107322, 2023
  • 8 Basantia S.K., Bakkar M.A., Bhattacharya A. , Das D., Khutia N., Predicting macro- and microscopic responses of dual-phase steels under low cycle fatigue based on multi-scale finite element methods, 32, Pages 3298–3321, Journal of Materials Engineering and Performance, Springer, DOI: https://doi.org/10.1007/s11665-022-07298-y, Science Citation Index Expanded (SCIE) Journal, Impact Factor 2.3, 2022 9 Pandey V., Arora P., Gupta S.K., Khutia N. , Dey P. P., A phenomenological unified model for uniaxial and multiaxial LCF and ratcheting: From specimen to pressurized straight nuclear piping of SA333 C-Mn-steel, 44, 365, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer,Science Citation Index Expanded (SCIE) Journal, Impact Factor 2.2, DOI: https://doi.org/10.1007/s40430-022-03675-9, 2022 10 Bhowmik K., Khutia N., Tarfaoui M., Basu A., Akhtar S., Dey S., Roy Chowdhury A., Influence of Carbon Nanotube Defects on the Elastic Modulus of Nanocomposite: Multiscale Simulation, 32, 2356–2369, Journal of Materials Engineering and Performance, Springer, Science Citation Index Expanded (SCIE), Impact Factor 2.3 , D.O.I: https://doi.org/10.1007/s11665-022-07287-1, 2022 11 Bhowmik K., Khutia N. , Tarfaoui M., Jana M., Das K., Roy T., Bandyopadhyay A., Roy Chowdhury A., Influence of Multiwalled Carbon Nanotube (MWCNT) on Progressive Damage of Epoxy/Carbon Fiber Reinforced Structural Composite, Volume 43, Issue 11, 7751-7772, Polymer Composites, Wiley, Science Citation Index Expanded (SCIE) Journal, Impact Factor 3.531, DOI: https://doi.org/10.1002/pc.2687722, 2022 12 Bhowmik K., Mukhopadhyay T., Tarfaoui M. , Khutia N. , Roy Chowdhury A., Damage modeling of MWCNT reinforced Carbon/Epoxy composite using different failure criteria: A comparative Study, 128, 549 (Pages 1-22), Applied Physics A, Springer, Science Citation Index (SCI) Journal, Impact Factor 2.7, https://doi.org/10.1007/s00339-022-05670-2, 2022
  • 13 K. Bhowmik, S.K. Basantia, T. Roy, A. Bandyopadhyay, N. Khutia, A. Roy Chowdhury, Mechanical properties of MWCNT reinforced epoxy nanocomposites: experimental, micromechanical and numerical study, 103, 575–586, Journal of The Institution of Engineers (India): Series D, SCOPUS Index Journal, DOI: https://doi.org/10.1007/s40033-022-00358-6, 2022
  • 14 Basantia S. K., Bhattacharya A., Khutia N., Das D., Influence of microstructural parameters on nanohardness of various dual-phase steels: Experiment, Finite Element simulation and Statistical analysis, 30, 103125, Materials Today Communications, Elsevier, Science Citation Index Expanded (SCIE) Journal, Impact Factor 3.8, https://doi.org/10.1016/j.mtcomm. 2022. 103125, 2022 15 Chakrabarty A., Sahu V.K, Das A., Mukherjee S., Gurao N.P., Chakraborty P., Bar H.N., Khutia N., Study of the effect of two separate tilt angles of laser scanning lines on the microstructure and mechanical properties in direct metal laser sintered AlSi10Mg alloy, 28, 250–268, Metals and Materials International, Springer, Science Citation Index Expanded (SCIE), Impact Factor 3.5, https://doi.org/10.1007/s12540-021-01080-w, 2022
  • 16 Das P., Khutia N., Dey P.P., Arora P., Gupta S. K.,, Ratcheting and stress relaxation of SA333 Gr. 6 carbon steel samples under uniaxial multistep strain-controlled condition, 43, 306, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer,Science Citation Index Expanded (SCIE) Journal, Impact Factor 2.2, DOI: https://doi.org/10.1007/s40430-021-03030-4, 2021
  • 17 Basantia S K., Bhattacharya A., Khutia N., Das D., Plastic behavior of ferrite-pearlite, ferrite-bainite and ferrite-martensite steels: Experiments and micromechanical modelling, 27, 1025–1043, Metals and Materials International, Springer, Science Citation Index Expanded (SCIE), Impact Factor 3.5, https://doi.org/10.1007/s12540-019-00519-5, 2021 18 Firoz R., Basantia S. K., Khutia N., Bar H.N., Sivaprasad S., Murty G.V.S., Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650 °C, 845, 156276, Journal of Alloys and Compounds, Science Citation Index (SCI), Impact Factor 6.2, DOI: https://doi.org/10.1016/j.jallcom.2020.156276, 2020 19 Bhowmik K., Akhtar S., Kalshyan R. K. , Khutia N., Roy Chowdhury A., CNT Reinforced Laminated Composite under In-Plane Tensile Loading: A Finite Element Study, 978, 323-329, Materials Science Forum, SCOPUS Index Journal, https://doi.org/10.4028/www.scientific.net/msf.978.323, 2020 20 Roy S., Dey Swati, Khutia N., Roy Chowdhury A., Datta S., Design of patient specific dental implant using FE analysis and computational intelligence techniques, 65, 272–279, Applied Soft Computing, Elsevier, Science Citation Index Expanded (SCIE) Journal, IF 8.7, DOI: 10.1016/j.asoc.2018.01.025, 2018 21 Roy S., Das M., Chakraborty P., Biswas J., Chatterjee S., Khutia N., Saha S., RoyChowdhury A., Optimal selection of dental implant for different bone conditions based on the mechanical response, 19 (2), 11-20, Acta of Bioengineering and Biomechanics, Science Citation Index Expanded (SCIE) Journal, IF 1.336, DOI: 10.5277/ABB-00530-2015-03, 2016 22 Roy S., Das M., Khutia N., Das D., Balla K V., Roy Chowdhury A., Understanding compressive deformation behavior of porous Ti using Finite Element Analysis, 64, 436-443, Materials Science and Engineering C, Elsevier,Science Citation Index (SCI) Journal, IF 7.9, DOI: 10.1016/j.msec.2016.03.066, 2016 23 Khutia N., Dey P. P., Hassan T., An improved nonproportional cyclic plasticity model for multiaxial low-cycle fatigue and ratcheting responses of 304 stainless steel, 91, 12-25, Mechanics of Materials, Elsevier, Science Citation Index (SCI) Journal, IF 3.9, DOI: 10.1016/j.mechmat.2015.05.011, 2015 24 Khutia N., and Dey, P.P., Material parameter optimisation of Ohno-Wang kinematic hardening model using multi objective genetic algorithm, 6(1), 50-74, Computational Materials Science and Surface Engineering, Inderscience, SCOPUS Index Journal, DOI: 10.1504/IJCMSSE.2014.063761, 2014 25 Khutia N., Dey P. P., Sivaprasad S., Tarafder S., Development of new cyclic plasticity model for 304LN stainless steel through simulation and experimental investigation, 78, 85-101, Mechanics of Materials, Elsevier, Science Citation Index (SCI) Journal, IF 3.9, DOI: 10.1016/j.mechmat.2014.07.019, 2014 26 Roy S., Panda D., Khutia N., RoyChowdhury A., Pore geometry optimization of titanium (Ti6Al4V) alloy, for its application in the fabrication of customized hip implants, 12, 1-13, International Journal of Biomaterials, Hindawi Publishing Corporation, Emerging Sources Citation Index Journal, IF 3.1, DOI: 10.1155/2014/313975, 2014 27 Khutia N., Dey P.P., Paul Surajit, Tarafder S., Development of Non Masing Characteristic Model for LCF and Ratcheting Fatigue Simulation of SA333 C-Mn Steel, 65, 88-102, Mechanics of Materials, Elsevier, Science Citation Index (SCI) Journal, IF 3.9, DOI: 10.1016/j.mechmat.2013.05.016, 2013
  • 1 G Shinde,S Garai,S Shrivastav, N Khutia, Flight Dynamics Modelling and Control of Flexible Wing Unmanned Aerial Vehicle, Symposium on Applied Aerodynamics and Design of Aerospace Vehicle, Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2023), February 09 -11, 2023, Hyderabad, India, 2023
  • 2 K. Bhowmik, H. Ambati, N. Khutia, A. Roy Chowdhury, Prediction of Elastic Constants of Spiral MWCNT Reinforced Nanocomposites by Finite Element Analysis, 37, 449–458, In: Maiti D.K. et al. (eds) Recent Advances in Computational and Experimental Mechanics, Vol–II, Lect. Notes Mech. Eng., Springer, 2022 3 Mallick M.,Chakrabarty A., Khutia A., Genetic algorithm based design optimization of crashworthy honeycomb sandwiched panels of AA7075-T651 aluminium alloy for aerospace applications, 1st International Conference on Materials Science and Mathematics for Advanced Technology (MSMAT 2021), Materials Today: Proceedings, Elsevier, 10 November 2021, 2021
  • 4 Chakrabarty A., Chakraborty P., Sahu V.K., Gurao N.P., Khutia N., Investigation of Strain Localization in Additively Manufactured AlSi10Mg using CPFEM, Indo-Korean Workshop on Multi-Functional Materials for Extreme Loading , IIT Madras-Hanyang University, MFMEL-2021, February 22-24, 2021., 2021
  • 5 Mainak Mallick,Aniket Chakrabarty,Niloy Khutia, Design optimization of honeycomb sandwich panel through Genetic Algorithm, Indian Society of Theoretical and Applied Mechanics (ISTAM), 2020
  • 6 K. Bhowmik, H. Ambati, N. Khutia and A. Roy Chowdhury, Prediction of Elastic Constants of Spiral MWCNT Reinforced Nanocomposites by Finite Element Analysis, International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM-2020), September 04-06, Indian Institute of Technology, Kharagpur, 2020
  • 7 Vibhanshu Pandey, Partha Pratim Dey, Niloy Khutia, Suneel K Gupta, Development of Modified Cyclic Plasticity Model To Simulate Cyclic Behavio Behaviour For Sa333-Mn Steel Under LCF Loading Conditions, International Conference on Recent Developments in Mechanical Engineering (ICRAME 2020), 07-09 February 2020, NIT Silchar, India, 2020
  • 8 Basantia S.K.,Prustya P.K.,Das D.,Khutia N., Micro-scale simulation of nanoindentation characteristics in dual-phase steel, Materials Today: Proceedings, Elsevier, 2020
  • 9 Firoz R., Chakrabarty A., Khutia N., Bar H. N., Study of Deformation and Fracture Behavior of Inconel 718 through Experiments and FE Analysis with GTN Model, Inernational Conference on Advanced Materials and Processes for Defence Applications (ADMAT 2019), Sept 23-25, 2019
  • 10 Das P., Khutia N., Dey P. P., Gupta Suneel. K., Arora P., Experimental Analysis and Simulation of Cyclic Plastic Behaviour under Uniaxial Multi Step Low Cycle Fatigue of 304 LN Stainless Steel, International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (December 5-7, 2019), Organized by Indian Institute of Technology Ropar, India, Society of Mecahn, 2019
  • 11 Basantia S. K., Khutia N., Das D., Microstructure Based FE Simulation to Predict Flow Behaviour of Dual Phase Steel Through RVE Approach, Pages 131-134, Proceedings of the 1st International Conference on Mechanical Engineering (INCOM18), Jadavpur University 4th – 6th January, 2018
  • 12 Das P., Khutia N., Dey P. P., Gupta S. K., Cyclic plasticity model with modified isotropic hardening rule for low cycle fatigue life prediction of SA333 GR.6 carbon steel, Pages 127-130, Proceedings of the 1st International Conference on Mechanical Engineering (INCOM18), Jadavpur University 4th – 6th January, 2018
  • 13 Bhowmik K., Nandy T., Kumar P., Khutia N., Roy Chowdhury A., Prediction of Directional Young's Modulus of Particulate Reinforced MMC using Finite Element Methods, Volume 377, Issue 1, 13 July 2018, Article number 012057, IOP Conf. Series: Materials Science and Engineering 377 (2018) 012057; International Conference on Mechanical, Materials and Renewable Energy,, 2018 14 Bhowmik K., Kumar P., Khutia N., Roy Chowdhury A., Evaluation of Directional Strength of SWCNT Reinforced Nanocomposites: A Finite Element Study, Volume 5, Issue 9, 2018, Pages 20528-20534, Materials Today: Proceedings; 8th International Conference on Materials Processing and Characterization, ICMPC 2018; Hyderabad; India; 16 March 2018 through 18 March 2018; Code 140097, 2018 15 Basantia SK., Singh V., Bhattacharya A., Khutia N., Das D., Prediction of Tensile Behaviour of Ferrite-Martensite Dual Phase Steel using Real Microstructure-based RVE Simulations, 377(1), 13 July 2018, Article number 012057, 1st International Conference on Mechanical, Materials and Renewable Energy, ICMMRE 2017; Majitar, East Sikkim; India; 8 December 2017 through 10 December 2017; Code 137950, 2018 16 Bhowmik K., Kumar P., Khutia N., Chowdhury AR., Estimation of Effective Directional Strength of Single Walled Wavy CNT Reinforced Nanocomposite, 338(1), April 2018, Article number 012016, IOP Conference Series: Materials Science and Engineering; Materials Science and Engineering; 7th National Conference on Processing and Characterization of Materials, NCPCM 2017; National Institute of , 2018 17 Singh, V, Basantia, S.K., Bhattacharya, A., Das, D., Khutia, N., Low cycle fatigue analysis of ferrite-martensite dual-phase steel using advanced cyclic plasticity models, 377(1),13 July 2018,Article number 012161, 1st International Conference on Mechanical, Materials and Renewable Energy, ICMMRE 2017; Majitar, East Sikkim; India; 8 December 2017 through 10 December 2017; Code 137950, 2018 18 Das B. K., Bakkar Md Abu, Khutia N., Das D. D., Low Cycle Fatigue Performance Evaluation of TMT rebar, Volume 4, Issue 2, 2017, Pages 2554-2563, Materials Today: Proceedings;Proceedings of 5th International Conference on Materials Processing and Characterization (ICMPC-2016), 12th to 13th March, 2016, GRIET, Hyderabad, 2017 19 Chakrabarty A., Khutia N., Bar H. N., Dey P. P., Sivaprasad S., Effect of Loading Variations on Damage of SA333 C-Mn Steel, Volume 4, Issue 2, 2017, Pages 415-423, Materials Today: Proceedings;Proceedings of 5th International Conference on Materials Processing and Characterization (ICMPC-2016), 12th to 13th March, 2016, GRIET, Hyderabad, 2017 20 Basantia S. K., Md Abu Bakkar, Khutia N., Das D., Simulation of LCF Characteristics of AA6063 Al Alloy under Different Aging Conditions, Volume 2, Issue 4-5, 2015, Pages 2226-2235, Materials Today: Proceedings;Proceedings of 4th International Conference on Materials Processing and Characterzation (ICMPC-2015), 14th to 15th March 2015,GRIET, Hyderabad, 2015
  • 21 Roy S., Khutia N., Das D., Roy Chowdhury A, FE analysis and deformation behavior of laser based porous Ti6Al4V using static loading condition, Pages 305-307, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2014), Nara, Japan,10th to 13th October, 2014
  • 22 Khutia N., Dey P.P., Sivaprasad S., Modification of Ohno Wang cyclic plasticity model through simulation and experimentation of 304LN stainless steel specimen, Pages 243-246, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2014), Nara, Japan,10th to 13th October, 2014
  • 23 Singh R. B., Khutia N., Dey P.P., Sivaprasad S., Evaluation of uniaxial and multiaxial fatigue of carbon steel through experiment and simulation using advanced kinematic hardening models, Pages 279-282, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2014), Nara, Japan,10th to 13th October, 2014
  • 24 Khutia N., Dey P. P., Optimization of input material parameters for Ohno-Wang hardening model using Genetic Algorithm, Pages 574-579, International Conference on Computer Aided Engineering (CAE-2013), IIT Chennai, 19th to 21st December, 2013
  • 25 Das P., Khutia N., Dey P.P., Sensitivity analysis of Chaboche parameter for characterization of cyclic plasticity behavior, International Conference on Computer Aided Engineering (CAE-2013), IIT Chennai, Pages 465-470, 2013
  • 26 Roy S., Biswas J., Panda D., Deb A., Bhowmik S., Khutia N., Roy Chowdhury A., Finite element study on crack development of titanium alloy (Ti6Al4V) specimen, Indian Conference on Applied Mechanics, Indian Conference on Applied Mechanics, INCAM-2013, 4th to 6th July, IIT Madras, 2013
  • 27 Roy, S., Panda, P., Deb, A., Bhowmick, S., Khutia, N., Roy Choudhury, A., Response of the effective modulus for different percentage of pore volume and pore size, Indian Society of Theoretical and Applied Mechanics, 2012 (ISTAM 2012) held at DIAT, Pune, 2012
  • 28 Roy, S., Panda, P., Deb, A., Bhowmick, S., Khutia, N., Roy Choudhury, A., Response of the effective modulus for different percentage of pore volume and pore size, Indian Society of Theoretical and Applied Mechanics, 2012 (ISTAM 2012) held at DIAT, Pune, 2012
  • 29 Roy, S., Khutia, N., Roy Choudhury, A., Weight and Natural Frequency Optimization of Automotive Engine Oil Sump Using Fibre Reinforced Composite Laminates, Third Asian Conference on Mechanics of Functional Materials and Structures, 2012 (ACMFMS 2012) held at IIT Delhi, 2012
  • Patents


    # Patents Year

    Member


    Member- The American Society of Mechanical Engineers

    Member, The American Society of Mechanical Engineers, Member Number: 103133625

    Member, The Aeronautical Society of India

    Membership No of The Aeronautical Society of India: M-20551 (Life Membership)

    Responsibilities


    Nodal Officer, NAD Cell
    2020 to Present
    Chairman, Departmental Training and Placement Committee
    2019 to Present
    PI Co In Charge CCMT for M.Tech Admission
    2021 to Present

    Projects


    • Development of a unified model to simulate uniaxial and multi-axial LCF and ratcheting for nuclear piping materials, Sponsored
      Completed

    Awards


    • Patent Award from Mahindra and Mahindra Ltd., FES, Mumbai, Year: 2003
    • Chairman Award for Innovation from Cummins Research and Technology India Ltd, Pune, Year: 2004

    Research Groups


    Saroj Kr. Basantia
    Ph. D.
    +91 83349 23773
    sarojsmile007@gmail.com

    Research:
    Experiment and Simulation Studies of Monotonic and Cyclic Deformation Behaviour of Two-Phase Steels

    Aniket Chakrabarty
    Ph. D.
    aniketchakrabarty2013@gmail.com

    Research:
    Mechanical Characterization of Additively Manufactured Structures Through Multiscale Modeling

    Krishnendu Bhowmik
    Ph. D
    +91 90513 27240
    krishnendu.besu@gmail.com
    Sandipan Roy
    Ph. D
    +91 94744 51627
    sandipan888roy@gmail.com
    Prasenjit Das
    Ph. D.
    9609767032
    pd.jgec006@gmail.com

    Research:
    Constitutive and finite element modeling of uniaxial and multiaxial LCF and ratcheting for nuclear piping steel

    Sandipan Roy
    Ph. D.
    sandipan888roy@gmail.com

    Research:
    Design and Development of Implant Material and Its Application in Patient Specific Dental Prosthesis

    Vibhanshu Pandey
    Ph. D.
    7980019050
    vp.rs2017@mech.iiests.ac.in / vibhanshupandey30@gmail.com

    Research:
    Development of constitutive cyclic plasticity model for FE Simulation of Nuclear piping material under proportional and Nonproportional loading.

    Citations


    Google Scholar
    CITATION H-INDEX I-10 INDEX
    451 10 11
    Research Gate
    PUBLICATIONS CITATION H-INDEX
    44 388 8
    Scopus
    DOCUMENTS CITATION H-INDEX
    39 358 10

    Created: 23 November 2019