Pre-loader

Kaushik Mukherjee

About


I received the B.E. degree in electrical engineering from Jadavpur University, Calcutta, India, in 1993, the M.E. degree in electrical engineering from Bengal Engineering College, Howrah, India, in 1998, and the Ph.D. degree in electrical engineering from the Indian Institute of Technology, Kharagpur, Kharagpur, India, in 2003. Since 1993, I have spent almost two and a half years in the industry, first with Andrew Yule and Co. Ltd., Brentford Unit. Electrical Division, India and then with Siemens Ltd., Projects Division, India. I started my teaching career as a lecturer at the Department of Electrical Engineering, Jadavpur University, Kolkata in June 2002. I am at present an Associate Professor in the Department of Electrical Engineering, Indian Institute of Engineering Science and Technology (IIEST), Shibpur, Howrah, India. I am also a Visiting (Research) Professor with the Centre for Hybrid Automotive Research and Green Energy (CHARGE) lab, University of Windsor, Windsor, Canada. My collaborative research with Prof. Narayan Kar, CHARGE, University of Windsor, Canada has so far yielded joint supervision of three doctoral research scholars and about fifteen IEEE transaction papers. Two of these scholars have visited me at IIEST Shibpur and both stayed for about two months for their research in my laboratory at IIEST Shibpur. My research interests include Electrical Machines, Electrical Drives, and other Power Electronic applications, particularly targetted to Electrified Vehicles, Distributed Generation and Flexible AC Transmission Systems (FACTS). I am a regular reviewer of research manuscripts for IET Generation, Transmission, Distribution; IET Electric Power Applications; IEEE Transactions on Energy Conversion; IEEE Transactions on Industry Applications, IEEE Transactions on Industrial Electronics and IEEE Transactions on Power Electronics. I am, at present, a Senior Member of IEEE, USA and have delivered invited lectures at Imperial College, London. UK, University of Victoria, Canada, University of Windsor, Canada, National Institute of Durgapur, Indian  Institute of Mizoram, India ans SASTRA University, India. I am also a part of a team of six teaching faculties passionate about Power Electronics, Machines and Drives in the Department of Electrical Engineering, IIEST Shibpur and I have done my little bit towards building the state-of-the-art Advanced Power Electronics Laboratory of this department from 2006-2011.

Academic Qualifications


B.E. (Electrical) from Jadavpur University, India in 1993;
M.E. (Electrical) from Bengal Engineering College (Deemed University), India in 1998;
Ph.D – from Indian Institute of Technology, Kharagpur, India in 2003.

Research Statement


I undertake research in the following areas:

(1) Electric Machines and Drives targetted towards Electrified Vehicles - I strive towards analysis, design, development and testing of electrical machines and drives with large power/torque densities, high efficiency, less cost and large constant power speed range (CPSR). To be more particular, I am at present pursuing R&D on novel brushless sustainable synchronous machines and drives

(2) Power Electronic Converter systems targetted towards distributed generation - I strive towards analysis, design, development and testing of power electronic converter systems with high efficiency and large gain for grid integration powered from solar PV arrays/modules and also from wind power

(3) Power Electronic Converter systems for FACTS - I strive towards analysis, development of novel control algorithms for such power controllers and subsequent testing

(4) Charging of battry packs of Electric Vehicle - I strive towards analysis, development and testing of different conductive and inductive charging techniques through power electronics; I am particularly interested towards the novel concept of integrated charging

Latest Publications


  • 1 46. Sayani Chatterjee, Ashesh Mandal, Suvarun Dalapati, Pabitra Halder, Kaushik Mukherjee, Design, Simulation & Thermal Analysis of an Interior Permanent Magnet Synchronous Motor for a Fork-lift Truck Application, 206-211, IEEE Calcutta Conference (CALCON 2020), Kolkata, India,, 2020
  • 2 45. Debalina Nanda, Prasid Syam, Kaushik Mukherjee, Selection procedure of Z-network parameters for a SVPWM Voltage-fed ZSI under varying input voltage conditions with simulated performance, 361-366, IEEE Region 10 Symposium (TENSYMP-2019) 2019, Kolkata, India, 2019
  • 3 24. H. Dhulipati, S. Mukundan, C. Lai, Kaushik Mukherjee, Jimi Tjong and Narayan C. Kar, Multiple Reference Frame-Based Extended Concentrated Wound PMSM Model Considering PM Flux Linkage and Inductance Harmonics, 34, no. 2, 731-740, IEEE Transactions on Energy Conversion, 2019
  • 4 44. D. Das, A. Basak, K. Mukherjee, P. Syam, Degradation of input displacement power factor by Input Current Filter and its compensation for a Matrix Converter, 1-6, IEEE International Conference on Power Electronics, Drives and Energy Systems 2018, Chennai, India, 2018
  • 5 23. C. Lai, G. Feng, Kaushik Mukherjee, Jimi Tjong and N. C. Kar, Maximum Torque Per Ampere Control for IPMSM Using Gradient Descent Algorithm Based on Measured Speed Harmonics, 14, no. 4, 1424-1435, IEEE Transactions on Industrial Informatics, 2018
  • 6 K.L.V. Iyer, C. Lai, S. Mukundan, H. Dhulipati, K. Mukherjee, and N. C. Kar, Investigation of a Six-phase Interior Permanent Magnet Synchronous Machine for Integrated Charging and Propulsion in EVs, in press, SAE International Journal of Alternative Powertrains, 2018
  • 7 Chunyan Lai, G. Feng, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, Torque ripple Modeling and Minimization for Interior PMSM Considering Magnetic Saturation, 33(3), 2417-2429, IEEE Transactions on Power Electronics, 2018
  • 8 S. Mukundan, H. Dhulipati, K. L. V. Iyer, N. C. Kar and K. Mukherjee, Comparison of Inductance Determination Methods of PMSMs for EV Application, 1-4, proceedings of the 30th IEEE Canadian Conference on Electrical and Computer Engineering, 2017
  • 9 P. Korta, K. L. V. Iyer, C. Lai, K. Mukherjee, J. Tjong, and N. C. Kar, A novel hybrid approach towards drive-cycle based design and optimization of a fractional slot concentrated winding SPMSM for BEVs, 2086-2092, proceedings of the IEEE Energy Conversion Congress and Exposition, Ohio, United States, 2017
  • 10 C. Lai, G. Feng, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, Accurate inductances and magnet flux linkage estimation in interior PMSM employing speed harmonic measurements, 1771-1776, proceedings of the 43rd IEEE Annual Conference of Industrial Electronics Society, IECON 2017, Beijing, China, 2017
  • View More

    Research Areas


    • FACTS controllers
    • Distributed Generation
    • Electrified Vehicles
    • Electrical Machines and Drives

    Publications


  • 1 24. H. Dhulipati, S. Mukundan, C. Lai, Kaushik Mukherjee, Jimi Tjong and Narayan C. Kar, Multiple Reference Frame-Based Extended Concentrated Wound PMSM Model Considering PM Flux Linkage and Inductance Harmonics, 34, no. 2, 731-740, IEEE Transactions on Energy Conversion, 2019
  • 2 23. C. Lai, G. Feng, Kaushik Mukherjee, Jimi Tjong and N. C. Kar, Maximum Torque Per Ampere Control for IPMSM Using Gradient Descent Algorithm Based on Measured Speed Harmonics, 14, no. 4, 1424-1435, IEEE Transactions on Industrial Informatics, 2018
  • 3 K.L.V. Iyer, C. Lai, S. Mukundan, H. Dhulipati, K. Mukherjee, and N. C. Kar, Investigation of a Six-phase Interior Permanent Magnet Synchronous Machine for Integrated Charging and Propulsion in EVs, in press, SAE International Journal of Alternative Powertrains, 2018
  • 4 Chunyan Lai, G. Feng, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, Torque ripple Modeling and Minimization for Interior PMSM Considering Magnetic Saturation, 33(3), 2417-2429, IEEE Transactions on Power Electronics, 2018
  • 5 Chunyan Lai, G. Feng, K. Mukherjee, and N. C. Kar, Investigations of the Influence of PMSM Parameter Variations in Optimal Stator Current Design for Torque Ripple Minimization, 32(3), 1052-1062, IEEE Transactions on Energy Conversion, 2017
  • 6 Chunyan Lai, G. Feng, K. Mukherjee, V. Loukanov, and N. Kar, Torque Ripple Minimization for Interior PMSM with Consideration of Magnetic Saturation Incorporating Online Parameter Identification, 53(6), IEEE Transactions on Magnetics, 2017
  • 7 Guodong Feng, C. Lai, K. Mukherjee, N. C. Kar, Online PMSM Magnet Flux-Linkage Estimation for Rotor Magnet Condition Monitoring Using Measured Speed Harmonics, 53(3), 2786-2794, IEEE Transactions on Industry Applications, 2017
  • 8 Chunyan Lai, G. Feng, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, Generic Algorithm-Based Current Optimization for Torque Ripple Reduction of Interior PMSMs, 53(5), 4493-4503, IEEE Transactions on Industry Applications, 2017
  • 9 Xiaomin Lu, K. L. V. Iyer, Chunyan Lai, Kaushik Mukherjee and N. C. Kar, Design and Testing of a Multi-port Sustainable DC Fast-charging System for Electric Vehicles, 44(14), 1576 - 1587, Journal of Electric Power Components and Systems, 2016
  • 10 Guodong Feng, Chunyan Lai, Kaushik Mukherjee and N.C. Kar, Current Injection-Based Online Parameter and VSI Nonlinearity Estimation for PMSM Drives Using Current and Voltage DC Components, 2(2), 119-128, IEEE Transactions on Transportation Electrification, 2016, 2016
  • 11 Xiaomin Lu, K.L.V. Iyer, Kaushik Mukherjee N. C. Kar, Investigation of Integrated Charging and Discharging Incorporating Interior Permanent Magnet Machine with Damper Bars for Electric Vehicles, 31(1), 260-269, IEEE Transactions on Energy Conversion, 2016
  • 12 Chunyan Lai, K.L.V. Iyer, Kaushik Mukherjee and N.C. Kar, Analysis of Electromagnetic Torque and Effective Winding Inductance in a Surface-Mounted PMSM during Integrated Battery Charging Operation, 51(11), 1-4, IEEE Transactions on Magnetics, 2015
  • 13 S. B. Chaudhury, M. Sengupta and Kaushik Mukherjee, Vibration Monitoring of Rotating Machines Using MEMS Accelerometer, 2(9), International Journal Of Scientific Engineering And Research (IJSER) Journal (ISSN: 2347-3878), 2014
  • 14 Xiaomin Lu, K.L.V. Iyer, Kaushik Mukherjee, N. C. Kar, Investigation of Permanent Magnet Motor Drives Incorporating Damper Bars for Electrified Vehicles, 62, 3234-3244, IEEE Transactions on Industrial Electronics, 2014
  • 15 Kaushik Mukherjee, K. L. V. Iyer, Xiaomin Lu and N. C. Kar, A Novel and Fundamental Approach Toward Field and Damper Circuit Parameter Determination of Synchronous Machine, 49(5), 2097-2105, IEEE Transactions on Industry Applications, 2013
  • 16 Xiaomin Lu, K.L.V. Iyer, Kaushik Mukherjee, N. C. Kar, Development of a Novel Magnetic Circuit Model for Design of Premium Efficiency Three-Phase Line Start Permanent Magnet Machines With Improved Starting Performance, 49(7), 3965-3968, IEEE Transactions on Magnetics (Digital Object Identifier: 10.1109/TMAG.2013.2242869 ), 2013
  • 17 Xiaomin Lu, K.L.V. Iyer, Kaushik Mukherjee, N. C. Kar, A Novel Two-Axis Theory-Based Experimental Approach Towards Determination of Magnetization Characteristics of Line-Start Permanent Magnet Synchronous Machines, 49(8), 4733-4737, IEEE Transactions on Magnetics (Digital Object Identifier: 10.1109/TMAG.2013.2259152), 2013
  • 18 S. B. Chaudhury, M. Sengupta and Kaushik Mukherjee, Experimental study of induction motor misalignment and its online detection through data fusion, 7(1), 58-67, IET Journal Elect. Power Appl., 2013
  • 19 X. Lu, K. L. V. Iyer, Kaushik Mukherjee, and N. C. Kar, A Dual Purpose Triangular Neural Network Based Module for Monitoring and Protection in Bi-directional Off-board Level-3 Charging of EV/PHEV, 3(4), 1670-1678, IEEE Transactions on Smart Grid, 2012
  • 20 X. Lu, K. L. V. Iyer, Kaushik Mukherjee, and N. C. Kar, A Wavelet/Particle Swarm Optimization based Voltage Regulation Scheme and Suitability Analysis of Copper- and Aluminum-rotor Induction Machines for Distributed Wind Power Generation, 3(4), 1923-1934, IEEE Transactions on Smart Grid, 2012
  • 21 K. L. V. Iyer, X. Lu, Kaushik Mukherjee, and N. C. Kar, A Novel Two-Axis Theory based Approach towards Parameter Determination of Line-Start Permanent Magnet Synchronous Machines, 48(11), 4208-4211, IEEE Transactions on Magnetics, 2012
  • 22 Kaushik Mukherjee, S. Sengupta, T. K. Bhattacharya, A. K. Chattopadhyay and S. N. Bhadra, A Simplified Analytical Averaged model of a Thyristorized Commutatorless Series Motor, 1508-1515, IEEE Transactions on Industry Applications, 2006
  • 23 Kaushik Mukherjee, S. Sengupta, T. K. Bhattacharya and A. K. Chattopadhyay, Simplified Steady-State Model of an SCR-Inverter-Based Load-Commutated Commutatorless Series Motor, 17(2), 197-202, IEEE Transactions on Energy Conversion, 2002
  • 24 S. Sengupta, Kaushik Mukherjee, T. K. Bhattacharya and A. K. Chattopadhyay, Performance of an SCR-Inverter-Based Commutatorless Series Motor with Load Commutation and Unaided Startup Capability, 36(4), 1151-1157, IEEE Transactions on Industry Applications, 2000
  • 1 46. Sayani Chatterjee, Ashesh Mandal, Suvarun Dalapati, Pabitra Halder, Kaushik Mukherjee, Design, Simulation & Thermal Analysis of an Interior Permanent Magnet Synchronous Motor for a Fork-lift Truck Application, 206-211, IEEE Calcutta Conference (CALCON 2020), Kolkata, India,, 2020
  • 2 45. Debalina Nanda, Prasid Syam, Kaushik Mukherjee, Selection procedure of Z-network parameters for a SVPWM Voltage-fed ZSI under varying input voltage conditions with simulated performance, 361-366, IEEE Region 10 Symposium (TENSYMP-2019) 2019, Kolkata, India, 2019
  • 3 44. D. Das, A. Basak, K. Mukherjee, P. Syam, Degradation of input displacement power factor by Input Current Filter and its compensation for a Matrix Converter, 1-6, IEEE International Conference on Power Electronics, Drives and Energy Systems 2018, Chennai, India, 2018
  • 4 S. Mukundan, H. Dhulipati, K. L. V. Iyer, N. C. Kar and K. Mukherjee, Comparison of Inductance Determination Methods of PMSMs for EV Application, 1-4, proceedings of the 30th IEEE Canadian Conference on Electrical and Computer Engineering, 2017
  • 5 P. Korta, K. L. V. Iyer, C. Lai, K. Mukherjee, J. Tjong, and N. C. Kar, A novel hybrid approach towards drive-cycle based design and optimization of a fractional slot concentrated winding SPMSM for BEVs, 2086-2092, proceedings of the IEEE Energy Conversion Congress and Exposition, Ohio, United States, 2017
  • 6 C. Lai, G. Feng, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, Accurate inductances and magnet flux linkage estimation in interior PMSM employing speed harmonic measurements, 1771-1776, proceedings of the 43rd IEEE Annual Conference of Industrial Electronics Society, IECON 2017, Beijing, China, 2017
  • 7 S. Mukundan, H. Dhulipati, K. L. V. Iyer, C. Lai, K. Mukherjee, and N. C. Kar, Comparative Performance Analysis of 3-phase IPMSM Rotor Configurations with Dampers for Integrated Charging Application in EV, 1856-1861, proceedings of the 43rd IEEE Annual Conference of Industrial Electronics Society, IECON 2017, Beijing, China, 2017
  • 8 S. Mukherjee, A. Basak, K. Mukherjee, P. Syam, Effect of Supply Frequency and Magnitude Variation on Generation of SVPWM Switching Pulses for Three Phase Matrix Converter, 1-6, IEEE India International Conference on Power Electronics (IICPE 2016), Patiala, India, 2016
  • 9 K. L. V. Iyer, B. Minaker, K. Mukherjee, J. Tjong, and N. C. Kar, On-board Direct-Drive Surface Permanent Magnet Synchronous Machine with Fractional-Slot Concentrated Windings for Electric Vehicles, 1-6, Proceedings of the IEEE Canadian Conference on Electrical & Computer Engineering, Vancouver, Canada, 2016
  • 10 C. Lai, G. Feng, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, Genetic algorithm based current ptoimization for torque ripple reduction of interior PMSMs, 1050-1056, Proceedings of the 22nd IEEE International Conference on Electrical Machines, ICEM 2016 Switzerland, 2016
  • 11 K. L. V. Iyer, H. Dhulipati, S. Mukundan, K. Mukherjee, J. Tjong, and N. C. Kar, Design Approach Incorporating MTPA and Winding Function Theories for On-board Direct-Drive Surface PM Machines with Concentrated Windings in EVs, 1499-1505, Proceedings of the 22nd IEEE International Conference on Electrical Machines, ICEM 2016 Switzerland, 2016
  • 12 S. Mukundan, K. L. V. Iyer, H. Dhulipati, K. Mukherjee, J. Tjong, and N. C. Kar, Response Surface Methodology based optimization of surface PM Machine Incorporating Stator Slotting and PM Sizing Effects to Extend the Operating Limits for Direct-drive EV Application, 2045-2051, in Proceedings of the 22nd IEEE International Conference on Electrical Machines, ICEM 2016 Switzerland, 2016
  • 13 H. Dhulipati, K. L. V. Iyer, S. Mukundan, K. Mukherjee, J. Tjong, and N. C. Kar, Investigation of 6-Phase Surface PM Machines with Concentrated Windings for Reduction in Space Harmonics, Leakage Inductance and Magnet Loss in Direct-Drive EV, 811-817, in Proceedings of the 22nd IEEE International Conference on Electrical Machines, ICEM 2016 Switzerland, 2016
  • 14 Abhinandan Basak, Kaushik Mukherjee and Prasid Syam, Effect of Matrix Converter on the Speed Control Scheme of a Grid Connected Doubly-Fed Induction Generator System, paper ID 59, in CD ROM-based proceedings of the Second International Conference on Control, Instrumentation, Energy & Communication (CIEC-2016) held during Jan. 28-30, 2016, Kolkata, India (IEEE Conf, 2016
  • 15 Tanmoy Dey, Kaushik Mukherjee and Prasid Syam, Dynamic Adjustments of the D-Q axes Reference Voltage Limits during Flux Weakening and Maximum Torque Per Ampere Control of an IPMSM Drive for an EV Application, paper ID 74, in CD ROM-based proceedings of the Second International Conference on Control, Instrumentation, Energy & Communication (CIEC-2016) held during Jan. 28-30, 2016, Kolkata, India (IEEE Conf, 2016
  • 16 Abhisek Maiti, Kaushik Mukherjee and Prasid Syam, Design Methodology, Control and Performance of a Three-Phase Grid-Tie PV Inverter under Maximum Power Point Tracking, paper ID 73, in CD ROM-based proceedings of the Second International Conference on Control, Instrumentation, Energy & Communication (CIEC-2016) held during Jan. 28-30, 2016, Kolkata, India (IEEE Conf, 2016
  • 17 Abhinandan Basak, Kaushik Mukherjee and Prasid Syam, Speed Control of A Grid Connected Doubly-Fed Induction Generator System for Maximum Power Point Tracking with Improved Input Power Factor Employing Matrix Converter as a Slip Power Exchanger, paper ID 31, in CD ROM-based proceedings of the 2016 IEEE First International Conference on Control, Measurement and Instrumentation, held during Jan. 8-10, 2016, Kolkata, India (IEEE Conference ID: 3, 2016
  • 18 Abhisek Maiti, Kaushik Mukherjee and Prasid Syam, Design, Modeling and Software Implementation of a Current-Perturbed Maximum Power Point Tracking Control in a DC-DC Boost Converter for Grid-Connected Solar Photovoltaic Applications, paper ID 30, in CD ROM-based proceedings of the 2016 IEEE First International Conference on Control, Measurement and Instrumentation, held during Jan. 8-10, 2016, Kolkata, India (IEEE Conference ID: 3, 2016
  • 19 K. L. V. Iyer, S. Mukundan, H. Dhulipati, K. Mukherjee, H. Minaker and N. C. Kar, Design Considerations for Permanent Magnet Machine Drives for Direct-Drive Electric Vehicles, 1170-1176, Proceedings of IEEE International Electric Machines and Drives Conference, IEMDC 2015, Idaho, USA, 2015
  • 20 Subimal Bikash Chaudhury, M. Sengupta and K. Mukherjee, Air-gap flux analysis of misaligned induction motor under different load conditions, Paper ID 39 (Technical Session II: Motor Drives I), National Power Electronics Conference (NPEC), Indian Institute of Technology, Kanpur, 2013., 2013
  • 21 X. Lu, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, A Novel Two-axis Theory based Approach towards Determination of Magnetizing Characteristics of Line Start Permanent Magnet Machine and its Effects on Stability and Starting Performance, Proc. of the 10th Latin American IEEE Workshop on Magnetism, Magnetic Materials, and Their Applications, in Buenos Aires, Argentina, 2013., 2013
  • 22 X. Lu, K. L. V. Iyer, K. Mukherjee, and N. C. Kar, Development of a Novel Magnetic Circuit Model for Design of Premium Efficiency Three-Phase Line Start Permanent Magnet Machines with Improved Starting Performance, Proc. of the 12th Joint MMM/Intermag-IEEE Conference, Chicago, USA, 2013., 2013
  • 23 K. L. V. Iyer, X. Lu, K. Mukherjee, and N. C. Kar, Design of a Novel Copper-rotor Line Start Permanent Magnet Machine Tailoring Skin and Proximity Effects for Improved Starting Performance, Proc. of the 12th Joint MMM/Intermag-IEEE Conference, Chicago, USA, 2013., 2013
  • 24 Xiaomin Lu, K.L.V. Iyer; K. Mukherjee, N. C. Kar, Study of permanent magnet machine based flywheel energy storage system for peaking power series hybrid vehicle control strategy, 1-7, IEEE Transportation Electrification Conference and Expo (ITEC), 2013, 2013 25 K. L. V. Iyer, X. Lu, Kaushik Mukherjee and N. C. Kar, Fault Detection in Copper-rotor SEIG System Using Artificial Neural Network for Distributed Wind Power Generation, 1700-1705, IEEE International Conference on Electric Machines (ICEM), September 2 – 5, 2012, Marseille, France., 2012 26 Kaushik Mukherjee, K. L. V. Iyer, X. Lu, and N. C. Kar, A Novel and Fundamental Approach towards Field and Damper Circuit Parameter Determination of Synchronous Machine, 41-46, IEEE International Conference on Electric Machines (ICEM), September 2 – 5, 2012, Marseille, France, 2012
  • 27 X. Lu, K. L. V. Iyer, Kaushik Mukherjee and N. C. Kar, Study and detection of demagnetization in line start permanent magnet synchronous machines using artificial neural network, 1-6, Proceedings of the 15th IEEE International Conference on Electric Machines & Systems (ICEMS), 2012, held in Sapporo, Japan, 21st – 24th October 2012, 2012
  • 28 S. M. M. Sangdehi, K. L. V. Iyer, Kaushik Mukherjee and N. C. Kar, Short Term Power Demand Forecasting in Light and Heavy Duty Electric Vehicles Through Linear Prediction Method, 1-6, IEEE Transportation Electrification Conference and Expo, June 17-20, 2012, Dearborn, MI, USA, 2012 29 X. Lu, K. L. V. Iyer, Kaushik Mukherjee and N. C. Kar, Development of a Bi-directional Off-board Level-3 Quick Charging Station for Electric Bus, 1-6, IEEE Transportation Electrification Conference and Expo, June 17-20, 2012, Dearborn, MI, USA, 2012 30 D. Biswas, Kaushik Mukherjee and N. C. Kar, A novel approach towards electrical loss minimization in vector controlled induction machine drive for EV/HEV, 1-5, IEEE Transportation Electrification Conference and Expo, June 17-20, 2012, Dearborn, MI, USA., 2012 31 K. L. V. Iyer, X. Lu, K. Mukherjee, and N. C. Kar, Online Stator and Rotor Resistance Estimation Scheme Using Swarm Intelligence for Induction Motor Drive in EV/HEV, 202-207, Proceedings of the 1st IEEE International Electric Drives Production Conference (EDPC), Erlangen-Nuremberg, Germany, 2011., 2011
  • 32 Subhendu Banerjee, K. Mukherjee and Gautam Bandyopadhyay, Hardware implementation of A Field Programmable Gate Array based Commutatorless DC Motor Drive with Shunt Characteristics, 58-63, Proceedings of the 6th National Power Electronics Conference (NPEC), Howrah, India, 2011, 2011
  • 33 S. B. Chaudhury, M. Sengupta and K. Mukherjee, Time stepping Finite Element analysis based simulation study of air gap flux distribution for misaligned rotor cage induction motor, 64-69, Proceedings of the 6th National Power Electronics Conference (NPEC), Howrah, India, 2011, 2011
  • 34 Souvik Dasgupta, Kaushik Mukherjee, Mainak Sengupta, A Simplified Averaged Dynamic Model of a Permanent Magnet Synchronous Motor Driven By a Two-level, Three-phase, Self-Controlled Transistorized Voltage Source Inverter Under 1200 Conduction Mode, 727-731, The 4th IET International Conference on Power Electronics, Machines and Drives (PEMD) 2008, York, U.K., April 2 – 4, 2008, 2008
  • 35 Pabitra Biswas, Kaushik Mukherjee, Debjani Ganguly, A SEQUEL-software based model of a Permanent Magnet Synchronous Motor Drive – Part II. An adjustable-speed one incorporating an SPWM inverter, The 3rd National Power Electronics Conference (NPEC) 2007, organized by Indian Institute of Science, Bangalore, December 16-19, 2007, pp. Session II-B, file no. 170.pdf of proceedings CD., 2007
  • 36 Pabitra Biswas, Kaushik Mukherjee, Debjani Ganguly, A SEQUEL-software based model of a Permanent Magnet Synchronous Motor Drive – Part I. Fed from a Voltage Source Inverter operating under 1800 conduction, The 3rd National Power Electronics Conference (NPEC) 2007, organized by Indian Institute of Science, Bangalore, December 16-19, 2007, Session II-B, file no. 169.pdf of proceedings CD., 2007
  • 37 Sudhin Roy, Mainak Sengupta, Kaushik Mukherjee, Simulation and testing of a Power Converter for a 2 kW induction heating unit with real heating load, The 3rd National Power Electronics Conference (NPEC) 2007, organized by Indian Institute of Science, Bangalore, December 16-19, 2007, pp. Session I-B, file no. 177.pdf of proceedings CD., 2007
  • 38 Sudhin Roy, Mainak Sengupta, Kaushik Mukherjee, Design of a 2 kW, 10 kHz induction heating unit, The 3rd National Power Electronics Conference (NPEC) 2007, organized by Indian Institute of Science, Bangalore, December 16-19, 2007, Session I-B, file no. 176.pdf of proceedings CD., 2007
  • 39 Soumya Ray, Kaushik Mukherjee, Nikhil Mondal and Sujit K. Biswas, Simulation of an Adjustable Speed Synchronous Motor fed from Sinusoidal Currents, 2, 736-740, The International Conference on Modeling and Simulation, MS’07, organized by University of Calcutta, Dept. of Applied Physics, December 3-5, 2007, Kolkata, India (Proceedings), 2007
  • 40 Kaushik Mukherjee, S. Sengupta, T. K. Bhattacharya and A. K. Chattopadhyay, A Torque-Controlled Thyristorized Commutatorless Series Motor Drive For High Power Industrial Applications, 59-62, The 2nd National Power Electronics Conference, NPEC 2005, at IIT Kharagpur, India, 2005, 2005
  • 41 Kaushik Mukherjee, S. Sengupta, T. K. Bhattacharya, A. K. Chattopadhyay and S. N. Bhadra, A Simplified Analytical Averaged model of a Thyristorized Commutatorless Series Motor, 715-720, The 6th International Conference on Power Electronics and Drive Systems, PEDS 2005, at Kuala Lumpur, Malaysia, 2005, 2005
  • 42 Kaushik Mukherjee, S. Sengupta, T. K. Bhattacharya and A. K. Chattopadhyay, Development of Closed Loop Control Schemes for Constant Speed Operation of a Thyristorized Commutatorless Series Motor Drive, 1112-1117, The 6th International Conference on Power Electronics and Drive Systems, PEDS 2005, at Kuala Lumpur, Malaysia, 2005, 2005
  • 43 Kaushik Mukherjee, S. Sengupta, T. K. Bhattacharya and A. K. Chattopadhyay, Constant Power Operation of a Thyristorized Commutatorless Series Motor, 1, 38-42, The International Conference on Electrical Machines & Systems, ICEMS 2005, at Nanjing, China, 2005, 2005
  • 44 Kaushik Mukherjee, S. Sengupta, T. K. Bhattacharya, S. N. Bhadra and A. K. Chattopadhyay, A Simplified Analytical Model of a Thyristorized Commutatorless Series Motor Drive, 54-59, The International Conference on Energy, Automation and Information Technology, EAIT-2001, at IIT Kharagpur, India, 2001, 2001
  • 45 Kaushik Mukherjee, S. Sengupta, T. K. Bhattacharya, S. N. Bhadra and A. K. Chattopadhyay, Sensorless implementation of an SCR-based commutatorless series motor drive, 1494-1497, The Annual International Conference of IEEE Industrial Electronics Society, IECON 2001 at Denver, USA, 2001, 2001
  • 46 S. Sengupta, Kaushik Mukherjee, T. K. Bhattacharya and A. K. Chattopadhyay, Performance of an SCR-Inverter-Based Commutatorless Series Motor with Load Commutation and Unaided Startup Capability, 1956-1963, The 34th Annual Industry Applications Annual Meeting and International Conference, 1999, at USA, 1999
  • 1 Kaushik Mukherjee, S. Sengupta and T. K. Bhattacharya, Commutatorless Series Motor Drive for High Power Applications: Development, Design, Analysis, Simulation Models and Hardware Implementation, VDM Verlag Mueller, Germany, ISBN-10: 3639284941, ISBN-13: 978-3639284942., 2010
  • Patents


    # Patents Year
    1 Method and apparatus for seamless power transfer 2013

    Member


    Senior Member, IEEE, USA.

    Responsibilities


    Past Vice-Chairperson, IEEE Industry Applications Kolkata Chapter, Kolkata, India

    Past Treasurer, IEEE Industry Applications Kolkata Chapter, Kolkata, India

    Past Secretary, IEEE Industry Applications Kolkata Chapter, Kolkata, India

    Past member, Junk Disposal Committee, EE Dept., IIEST Shibpur.

    Joint In-Charge, Electrical Machines Laboratory, EE Dept., IIEST Shibpur.

    In-Charge, Power Electronics Laboratory, EE Dept., IIEST Shibpur

    Past Head Examiner/Co-ordinator, post graduate curriculum, EE Dept., IIEST Shibpur.

    Past Secretary, D.A.C., EE Dept., IIEST Shibpur

    Member of the space committee, Dept. of EE, IIEST Shibpur

    Projects


    • MEMS for Electric Machines and Drives, Sponsored
      Ongoing
    • Development of motor eccentricity and vibration monitoring systems and control strategies for switched reluctance motor-based drives, Sponsored
      Ongoing
    • Design, development and testing of 3-phase permanent magnet machines and their converters, National Mission on Power Electronic Technology (NaMPET), Sponsored
      Completed
    • Development and validation of SEQUEL and real time models of various drives and testing and validation of the above ‘Application Models’ in Full Spectrum Simulator, Consultancy
      Completed
    • National Mission on Power Electronic Technology (NaMPET), Consultancy
      Completed
    • A Field Programmable Gate Array (FPGA) controller based real-time implementation of a commutatorless motor drive with selectable hard or soft characteristics, Sponsored
      Completed

    Awards


    • • Secured FIRST position in the University at the Master of Electrical Engineering, B. E. College (Deemed University), 1998., Year: 1998

    Research Groups


    MOYUKH MANDAL
    Ph. D.
    2021eep001.moyukh@students.iiests.ac.in

    Abhisek Maiti
    Ph. D.
    abhra4u.rs2013@ee.iiests.ac.in / abhra4u@gmail.com

    Research:
    Solar Photovoltaic based Grid-Interactive Sustainable Energy Solutions

    Abhinandan Basak
    Ph. D.
    abhi.basak.rs2013@ee.iiests.ac.in / abhibasak123@gmail.com

    Research:
    Application of Matrix Converter as a Frequency Changer Facilitating Slip Power Control in a Doubly fed Induction Generator Connected to Grid

    Debalina Nanda
    Ph. D.
    debalinananda91@gmail.com

    Research:
    IMPEDANCE SOURCE POWER ELECTRONIC CONVERTER

    Citations


    Google Scholar
    CITATION H-INDEX I-10 INDEX
    634 14 20

    Created: 23 November 2019