Subhas Chandra Mondal

1 Gangwar,Sukhdev; Mondal, Subhas Chandra and Ghadai, Ranjan Kumar, Development and performance evaluation of AlTiN-coated cutting tools using advanced PVD techniques, https://doi.org/10.1140/epjs/s11734-026-02235-9, The European Physical Journal Special Topics, 2026

2 Mir Abul Hassan and Subhas Chandra Mondal, Optimizing Weld Bead Geometry in Flux-Bounded TIG Welding of Al 6061: Effects of Flux Composition, Current, and Flux Gap, International Conference on Advanced Manufacturing and Industry 4.0, 2026

3 Maity, Arindam; Doloi, Biswanath; Mondal, Subhas Chandra and Bhattacharyya, Bijoy, Experimental Investigation into Jet Electrochemical Micro Machining (Jet EMM) of Ti6Al4V, 10th International and 31st All India Manufacturing Technology, Design & Research (AIMTDR 2025) December, 2025

4 Gourab Sen, Subhas Chandra Mondal and Ranjan Kumar Ghadai, Development and performance analysis of Copper–Graphene composite electrodes for electrical discharge machining applications, Journal of The Institution of Engineers (India): Series C; https://doi.org/10.1007/s40032-025-01299-1, 2025

5 Subham Kundu and Subhas Chandra Mondal, Application of powder metallurgy-processed Al-Cu-CNT composite electrodes for surface modification of inconel 718 using EDM, DOI: 10.1177/02670844251403870, pp. 1-23, Surface Engineering, 2025

6 Gourab Sen and Subhas Chandra Mondal, Synthesis and processing techniques of copper–graphene reinforced metal matrix composites: a review, Vol. 7 (3) DOI 10.1088/2631-8695/adfdad, pp. 1-44, Engineering Research Express, 2025

7 Subrata Mondal, Sutanu Misra, Goutam Paul, Koustov Mondol, Subhas Chandra Mondal, Exploring Machinability of Graphene Reinforced Aluminium Metal Matrix Composites: A Machine Learning Approach, accepted for publication 2025, Sadhana, 2025

8 Subrata Mondal, Goutam Paul, Koustov Mondol, Subhas Chandra Mondal, Electric Discharge Machining with Graphene Reinforced Aluminium Metal Matrix Composite (Gr Al MMC) Tool for EN 31 Die Steel Work Piece, Vol 106 (2), Journal of The Institution of Engineers (India): Series C SCI publication, 2025

9 Maity, Arindam; Doloi, Biswanath; Mondal, Subhas Chandra and Bhattacharyya, Bijoy, Experimental Investigation Into Jet Electrochemical Micromachining for Performance Improvement during Machining of Ti6Al4V, International Conference on Precision, Micro, Meso and Nano Engineering (COPEN 13) December, 2024

10 Gangwar Sukhdev, Ghadai, Ranjan Kumar, Mondal Subhas Chandra, and Gupta Mukul, A Comparative Study of MCDM Techniques for Optimizing CVD Process Parameters in SiCN Thin Film Coating Deposition., International Union of Materials Research Society International Conference In Asia (IUMRS-ICA 2024) at UGC-DAE Consortium for Scientific Research, Indore December, 2024

View More

Research Areas

Surface Coatings
Robust Manufacturing
Quality Engineering
Modelling and Optimization of Manufacturing Processes
Manufacturing (Traditional and Non-traditional)

Teachings

3 Subham Kundu and Subhas Chandra Mondal, Application of powder metallurgy-processed Al-Cu-CNT composite electrodes for surface modification of inconel 718 using EDM, DOI: 10.1177/02670844251403870, pp. 1-23, Surface Engineering, 2025

4 Gourab Sen and Subhas Chandra Mondal, Synthesis and processing techniques of copper–graphene reinforced metal matrix composites: a review, Vol. 7 (3) DOI 10.1088/2631-8695/adfdad, pp. 1-44, Engineering Research Express, 2025

5 Subrata Mondal, Sutanu Misra, Goutam Paul, Koustov Mondol, Subhas Chandra Mondal, Exploring Machinability of Graphene Reinforced Aluminium Metal Matrix Composites: A Machine Learning Approach, accepted for publication 2025, Sadhana, 2025

6 Subrata Mondal, Goutam Paul, Koustov Mondol, Subhas Chandra Mondal, Electric Discharge Machining with Graphene Reinforced Aluminium Metal Matrix Composite (Gr Al MMC) Tool for EN 31 Die Steel Work Piece, Vol 106 (2), Journal of The Institution of Engineers (India): Series C SCI publication, 2025

7 Subrata Mondal, Goutam Paul, Subhas Chandra Mondal, Koustov Mondol, Ziyauddin Seikh and Mukandar Sekh, Fabrication of Graphene Reinforced Aluminium Metal Matrix Composites for Advanced Tool Materials, https://doi.org/10.1007/s40032-025-01163-2, Journal of The Institution of Engineers (India): Series D SCOPUS, 2024

8 Sukhdev Gangwar; Subhas Chandra Mondal; Ajay Kumar; Ranjan Kumar Ghadai, Performance analysis and optimization of machining parameters using coated tungsten carbide cutting tool developed by novel S3P coating method, https://doi.org/10.1007/s12008-024-01852-9, International Journal on Interactive Design and Manufacturing (IJIDeM), Springer Publications, 2024

9 Subham Kundu; Subhas Chandra Mondal, Electro-thermal and mechanical property analysis of powder metallurgy processed, multi-stage ball milled aluminium-copper-multi walled carbon nanotube composite, 6 (2), DOI 10.1088/2631-8695/ad58a4, Engineering Research Express, 2024

10 Vishwajeet Kumar; Subhas Chandra Mondal, Experimental Investigation and Optimization of WEDM Process Parameters for the Development of Ni?Based Hardfaced Turning Tool Insert Using Hybrid GA?CoCoSo Technique, J. Inst. Eng. India Ser. D, 2024

11 Vishwajeet Kumar; Subhas Chandra Mondal, Tribomechanical investigation and parametric optimisation of the cutting performance of Ni-based hardfaced turning tool insert, DOI:10.1007/s12008-023-01464-9, International Journal on Interactive Design and Manufacturing (IJIDeM), Springer Publications, 2023

12 Kumar, Viswajeet and Mondal S.C., Tribomechanical investigation and parametric optimisation of the cutting performance of Ni-based hardfaced turning tool insert, International Journal on Interactive Design and Manufacturing, SCOPUS Publication, 2023

13 Saha, A. and Mondal, S. C., Modelling bead width and bead hardness in submerged arc welding using dimensional analysis, Vol. 36, No. 1, International Journal of Manufacturing Technology and Management, SCOPUS publication, 2022

14 P. Mandal and S. C. Mondal, Experimental investigation of the performance of copper-based MWCNT composite electrode in EDM, vol. 29 (11), International Journal of Surface Review and Letters, SCI publication, Impact factor 1.15, 2022

15 Kumar, Viswajeet and Mondal S.C., Cutting performance of Ni-W-Cr-B-Si hardfaced turning tool insert, Vol. 14, pages 4035–4044, Silicon, Impact factor 1.5, SCI publication, 2022

16 Saha, A. and Mondal, S. C, Modeling bead width and bead hardness in submerged arc welding using dimensional analysis, 36 (1), International Journal of Manufacturing Technology and Management, 2022

17 R. K. Ghadai, S. Das, K Kalita, I. Shivakotia, S. C. Mondal, B. P. Swain, Effect of nitrogen (N2) flow rate over the tribological, structural and mechanical properties diamond-like carbon (DLC) thin film, 260, Materials Chemistry and Physics , Elsevier Publication, Impact factor- 3.408, 2021

18 Mandal, Prosun and Mondal, Subhas Chandra, Multi-objective optimization of Cu-MWCNT composite electrode in electro discharge machining using MOPSO-TOPSIS, 169, Measurement. Elsevier publication, IF-3.364, 2021

19 Mandal, Prosun and Mondal, Subhas Chandra, Performance analysis of copper-based MWCNT composite coated 316L SS tool in Electro Discharge Machining, Machining Science and Technology, Taylor & Francis publication, IF - 2.071, 2021

20 Chakraborty, A; Datta, P; Majumder, S; Mondal, S.C. and Roychowdhury, A, Finite element and experimental analysis to select patient's bone condition specific porous dental implant, fabricated using additive manufacturing, 124, Computers in Biology and Medicine, Elsevier publication, IF- 3.434, Citation - 02, 2020

21 Mandal, Prosun and Mondal, Subhas Chandra, Enhancement of electro-thermal and mechanical properties for Cu-SWCNT coated 6061Al, Surface Engineering, Taylor & Francis Publication, IF -2.433, Citation - 02, 2020

22 Mandal, Prosun and Mondal, Subhas Chandra, Development and application of Cu-SWCNT nanocomposite–coated 6061Al electrode for EDM, 103(5-8), 3067-3076, The International Journal of Advanced Manufacturing Technology. Springer publication. IF-2.633, Citation - 01, 2019

23 R. K. Ghadai, K. Kalita, S. C. Mondal, B.P. Swain, Genetically optimized diamond-like carbon thin film coatings, Materials and Manufacturing Processes, Taylor & Francis Publication, IF - 3.046, Citation - 08, 2019

24 Mandal, Prosun and Mondal, Subhas Chandra, Surface characteristics of mild steel using EDM with Cu-MWCNT composite electrode, Materials and Manufacturing Processes, Taylor & Francis Publication, IF - 3.046, Citation - 11, 2019

25 A. Saha and S. C. Mondal, Statistical analysis and optimization of process parameters in wire cut machining of welded nanostructured hardfacing material, Silicon, IF-1.5, Citation - 5, 2019

26 Ghosh, Gourhari; Mandal, Prosun and Mondal, Subhas Chandra, Modelling and Optimization of Surface Roughness in Keyway Milling using ANN, Genetic Algorithm and Particle Swarm Optimization, 1-20, The International Journal of Advanced Manufacturing Technology. Springer publication. IF-2.633, Citation - 21, 2019

27 R. K. Ghadai, K. Kalita, S. C. Mondal, B.P. Swain, Investigation of Structural and Electronic Environments of Nitrogen-Doped CVD-Grown DLC Films, Advances in Electronics, Communication and Computing, Springer publication, 2018

28 Mandal, Prosun and Mondal, Subhas Chandra, Investigation of Electro-thermal property of Cu-MWCNT coated 316L stainless steel, 34(9), 697-704, Surface Engineering, Taylor & Francis Publication, IF -2.433, Citation - 11, 2018

29 A. Saha and S. C. Mondal, Multi-criteria selection of optimal welding parameter in MMAW hardfacing using MOORA method coupled with PCA, International Journal of Materials and Product Technology, IF - 0.714, Citation - 01, 2018

30 Mandal, Prosun and Mondal, Subhas Chandra, Investigation of Electro-Thermal property for Cu-MWCNT composite coating on anodized 6061 aluminium alloy, 454, 138-147, Applied Surface Science, Elsevier Publication, I.F-6.182, Citation-16, 2018

31 R. K. Ghadai, K. Kalita, S. C. Mondal, B.P. Swain, PECVD process parameter optimization: towards increased hardness of diamond-like carbon thin films, Materials and Manufacturing Processes, IF-3.046, Citation -20, 2018

32 Mandal, Prosun and Mondal, Subhas Chandra, Investigation of Electro-thermal property of Cu-MWCNT coated 316L stainless steel, International Journal of Surface Engineering.Taylor & Francis Publication, IF-2.433, Citation - 11, 2018

33 R.K. Ghadai, P.P. Das, I.Shivakoti, S. C. Mondal, B. P. Swain, Grey fuzzy logic approach for the optimization of DLC thin film coating process parameters using PACVD technique, IOP Conference series Material Science Engineering, Citation - 2, 2017

34 Mandal, Prosun and Mondal, Subhas Chandra, An Application of Artificial Neural Network and Particle Swarm Optimization Technique for Modeling and Optimization of Centerless Grinding Process, 20(3), 344-362, International Journal of Productivity and Quality Management, 2017

35 A. Saha and S. C. Mondal, Optimization of Wire electric discharge machining process: A review and reflection, International Journal of Productivity and Quality Management, 2017

36 Saha, A. and Mondal, S. C., Multi-objective optimization of manual metal arc welding process parameters for nano-structured hardfacing material using hybrid approach, 102, 80-89, Measurement. Elsevier publication,IF-3.364, Citation-22, 2017

37 Ghadai, R. K., Das, S., Kumar, D., Mondal, S. C. and Swain, B.P, Correlation between structural and mechanical properties of silicon doped DLC thin films, 82, 25-32, Diamond and Related Materials. Elsevier Publication, IF-2.65, Citation-14, 2017

38 Mondal, S. C. and Kumar, J, Application of Box-Behnken Design for the Optimization of Process Parameters in Dry Drilling Operation, 18(4), 456-473, International Journal of Productivity and Quality Management, 2016

39 Saha, A. and Mondal, S. C, Parametric Optimization of MMAW Process for Nano Hardfacing Material Using Hybrid Approach, International Journal of Mechanical and Production Engineering, 2016

40 A. Saha and S. C. Mondal, Multi-objective Optimization of Welding Parameters in MMAW for Nano-structured Hardfacing Material using GRA coupled with PCA, Transactions of the Indian Institute of Metals, Springer Publication, IF-1.202, Citation - 14, 2016

41 Saha, A. and Mondal, S. C, Multi-objective Optimization in WEDM process of Nanostructured Hardfacing Materials through Hybrid techniques, 94, 46-59, International Journal of Measurement. Elsevier publication, IF - 3.364, Citation - 56, 2016

42 Saha, A. and Mondal, S. C, Experimental Investigation and Modelling of WEDM Process for Machining Nano-structured Hardfacing Material, International Journal of the Brazilian Society of Mechanical Sciences and Engineering. Springer publication, IF - 1.755, Citation - 23, 2016

43 Mondal, S.C., Maiti, J., Ray, P.K. and Shafiee, M, Modelling process robustness: a case study of centrifugal casting, 27(3), 169-182, International Journal of Production Planning & Control, Taylor & Francis, IF -3.605, Citation - 01, 2016

44 A. Saha and S. C. Mondal, Optimization of process parameters in submerzed arc welding using multi-objectives Taguchi method, Advances in Material Forming and Joining, Citation - 11, 2015

45 S. C. Mondal, Process Capability – A Surrogate Measure of Process Robustness: A Case Study, International Journal of Quality and Reliability Management, 2015

46 Das, A., Mondal, S. C., Thakkar, J.J. and Maiti, J, A Methodology for Modelling and Monitoring of Centrifugal Casting Process, International Journal of Quality and Reliability Management, 2014

47 Mondal, S. C., Ray, P. K and Maiti, J, Modelling Robustness for Manufacturing Processes: A Critical Review, 52(2), 521-538, International Journal of Production Research, Taylor & Francis, IF - 4.577, Citation - 31, 2013

48 Mondal, S. C., Maiti, J. and Ray, P. K., Modelling Robustness in Serial Multistage Manufacturing Processes, 51(21), 6359-6377, International Journal of Production Research, Taylor & Francis, IF - 4.577, Citation - 11, 2013

49 Mondal, S.C., Maiti, J. and Ray, P. K, Development of a measurement metric for manufacturing process robustness, 6(2), 156-181, International Journal of Productivity and Quality Management, 2010

1 Mir Abul Hassan and Subhas Chandra Mondal, Optimizing Weld Bead Geometry in Flux-Bounded TIG Welding of Al 6061: Effects of Flux Composition, Current, and Flux Gap, International Conference on Advanced Manufacturing and Industry 4.0, 2026

2 Maity, Arindam; Doloi, Biswanath; Mondal, Subhas Chandra and Bhattacharyya, Bijoy, Experimental Investigation into Jet Electrochemical Micro Machining (Jet EMM) of Ti6Al4V, 10th International and 31st All India Manufacturing Technology, Design & Research (AIMTDR 2025) December, 2025

3 Maity, Arindam; Doloi, Biswanath; Mondal, Subhas Chandra and Bhattacharyya, Bijoy, Experimental Investigation Into Jet Electrochemical Micromachining for Performance Improvement during Machining of Ti6Al4V, International Conference on Precision, Micro, Meso and Nano Engineering (COPEN 13) December, 2024

4 Gangwar Sukhdev, Ghadai, Ranjan Kumar, Mondal Subhas Chandra, and Gupta Mukul, A Comparative Study of MCDM Techniques for Optimizing CVD Process Parameters in SiCN Thin Film Coating Deposition., International Union of Materials Research Society International Conference In Asia (IUMRS-ICA 2024) at UGC-DAE Consortium for Scientific Research, Indore December, 2024

5 Maity, Arindam, Bhattacharyya, Bijoy, Mondal, S. C. and Doloi, B., Experimental Investigation into Jet Electrochemical Micromachining for Performance Improvement during Machining of Ti6Al4V, Proceedings in the 13th International Conference on Precision, Meso, Micro, and Nano Engineering, COPEN 13, at NIT Calicut during December 13-15, 2024, 2024

6 Kumar, Viswajeet and Mondal S.C., Investigation of Mechanical Property and Irregularities of Fe-based Hardfaced Deposit, Proceedings in the 1st International Conference on Mechanical Design and Manufacturing, 2023

7 Kumar, Viswajeet and Mondal S.C., Optimisation of WEDM Process Parameters Using Grey-Taguchi Approach for the Development of Turning Tool Insert, 7th International Conference on Production & Industrial Engineering, 2023

8 Kumar, V. and Mondal, S. C, Optimisation of WEDM process parameters using TOPSIS-Taguchi hybrid approach for the development of Fe-based turning tool insert, 4th International Conference on Recent Advancements in Mechanical Engineering, 2023

9 Sinha, Ananda Sankar and Mondal, S.C., Experimental investigation and thermal analysis of Titanium alloy(Ti-6Al-4V) in EDM, Proceedings in the 1st International Conference on Mechanical Design and Manufacturing, 2023

10 Bharat Sai Metta, Mondal S.C. and Kumar, Vikash, Optimization of Battery Tab Interconnects by Micro-TIG Welding using Simulated Annealing Algorithm and RSM, International Conference on Research into Design for a Connected World, 2023

11 Gangwar Sukhdev, Mondal S.C.and Ghadai, Ranjan Kumar, Comparative Analysis of Various MCDM Techniques for the Optimization of W-DLC Coatings for Tool Materials of High Speed Steel and Cemented Carbide, International Conference on Research into Design for a Connected World, 2023

12 Kundu S., Mondal S.C, Development of Al–Cu Metal Matrix Composite Using Powder Metallurgy Technique, International Conference on Research into Design for a Connected World, 2021

13 S. Kundu and S. C. Mondal, Development of New Univariate Process Capability Index for Multistage Wheel Manufacturing System, pp. 745-749, IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2021, 2021

14 S. Mandal, G. Paul, S. C. Mondal, Investigation into the Application of Liquid CO 2 and MQL for CNC Turning of Al Alloy 3055, 977-987, International Conference on Research into Design, 2019

15 P. Mandal and S. C. Mondal, Investigation on the Performance of Copper-Coated 6061 Aluminium Alloy Electrode in Electric Discharge Machining, 345-355, International Conference on Research into Design for a Connected World, 2019

16 Ranjan Kr Ghadai, Subhas Ch Mondal, Bibhu P Swain, Optimization of PECVD process parameters for the deposition of DLC thin film using TOPSIS, ICNMS 2019, 2019

17 Ranjan Kr Ghadai, Subhas Ch Mondal, Bibhu P Swain, Investigation of Structural and Mechanical Properties of DLC Thin films in Reduction Atmosphere, 2nd International Conference on Geoscience, Energy and Materials (I-GEM), 2018

18 R.K. Ghadai, P.P. Das, I. Shivakoti, S. C. Mondal, B. P. Swain, Grey fuzzy logic approach for the optimization of DLC thin film coating process parameters using PACVD technique, IOP Conference Series: Materials Science and Engineering, 2017

19 Ranjan Kr Ghadai, Soham Das, Subhas Chandra Mondal, Bibhu P Swain, Investigation of Structural and Electronic Environments of Nitrogen-Doped CVD-Grown DLC Films, 443, 301-306, Lecture Notes in Electrical Engineering book series, 2017

20 Mondal, S. C., Saha, A. and Biswas, P., Optimization of Process Parameters in Centerless Grinding operation using Central Composite Rotatable Design, 4th International Conference on Industrial Engineering (ICIE-2017), 2017

21 Ghadai, R. K., Krishna, H., Kumar, D., Mondal, S. C. and Swain, B.P., Mechanical, Optical and Electrical properties of Ag incorporate Diamond like Carbon nanocomposite films for bioimplant applications: A Review, International Conference on Mechanical, Materials and Renewable Energy, 2017

22 Ghadai, R. K., Kumar, D., Mondal, S. C. and Swain, B.P., Raman and Nanoindentation study of Diamond like Carbon thin Films, International Conference on Mechanical, Materials and Renewable Energy, 2017

23 Khan, S., Kumar, V.,Mandal, P. and Mondal, S. C., Experimental Investigation of Combined TIG-MIG Welding for 304 Stainless Steel Plates, International Conference on Mechanical, Materials and Renewable Energy, 2017

24 Ghadai, R. K., Das, P. P., Shivakoti, I., Mondal, S. C. and Swain, B.P., Grey fuzzy logic approach for the optimization of DLC thin film coating process parameters using PACVD technique, IOP Conference Series in Materials Science and Engineering, 2017

25 Mondal, S. C., Ghosh, G. and Mandal, P., Application of Genetic Algorithm for the Optimization of Process Parameters in Keyway Milling, International Conference on Research into Design, 2017

26 Saha, A. and Mondal, S. C., Welding Parameters Optimization in MMAW Assisted Nano-Structured Hardfacing Using Desirability Function Analysis Embedded With Taguchi Method, International Conference on Research into Design, 2017

27 Saha, A. and Mondal, S. C., Machining Optimization of Nano-Structured Hardfaced Tool Insert in WEDM Using MOORA Method, International Conference on Research into Design, 2017

28 Ghosh, S., Mandal, P. and Mondal, S. C., Application of Simulated Annealing for the Optimization of Process Parameters in WEDM Process for Machining 201LN Stainless steel, IEEE International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS- 2017), 2017

29 Ghosh Gourhari, Mandal, Prosun and Mondal, Subhas Chandra, Modeling and Optimization of Surface roughness in Keyway using ANN and Genetic algorithm, Proceedings in the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016), 2016

30 Saha, A. and Mondal, S. C., Parametric Optimization of MMAW Process for Nano-hardfacing material using Hybrid approach, ISER 57th International Conference on Nano-Science, Nanotechnology and advanced materials, 2016

31 Mondal, S. C. and Mandal, P., Optimization of Surface Roughness in CNC Turing operation using Particle Swarm Optimization Technique, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN- 9), 2015

32 Saha, A. and Mondal, S. C., Optimization of Multi-performance Characteristics (weld bead width and bead hardness) in Submerged Arc Welding, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-9), 2015

33 Mondal, S. C., A Study of Multivariate Process Capability Indices in Manufacturing Processes, Proceedings of the 2015 IEEE International Conference on Industrial Engineering and Engineering management, 2015

34 Mondal, S. C. and Salim, M., Multivariate Process Control Charts: An Overview and Application, 57th National convention of Indian Institution of Industrial Engineering and 3rd International Conference on Industrial Engineering (ICIE-2015), 2015

35 Mondal, S. C. and Mandal, P., An Application of Particle Swarm Optimization Technique for Optimization of Surface Roughness in Centerless Grinding Operation, International Conference on Research into Design, 2015

36 Saha, A. and Mondal, S. C., Application of Grey Relational Analysis for the Optimization of Multi-performance Characteristics in Submerged Arc Welding, Proceedings in the International Conference on Advanced Materials and Energy Technology (ICAMET 2014), 2014

37 Mondal, S. C. and Mandal, P., Application of Artificial Neural Network for Modelling Surface Roughness in Centerless Grinding Operation, Proceedings in the 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), 2014

38 Ghadai, R. K., Behera, R. R. and Mondal, S. C., Modeling Electrical Discharge Machining Process using Artificial Neural Network for the Machining of Special Steel WP7V, Proceedings in the 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), 2014

39 Mondal, S. C. and Kundu, S., Application of Process Capability Indices to Measure Performance of a Multistage Manufacturing Process, Proceedings in the 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), 2014

40 Saha, A. and Mondal, S. C., Optimization of process parameters in submerged arc Welding using multi-objectives Taguchi method, Proceedings in the 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), 2014

41 Mondal, S. C., Kamath, R. K., Jana, R and Manna, S., Optimization of Process Parameters in Centerless Grinding Operation using Response Surface Methodology, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-8), 2013

42 Mondal S. C., Process Capability – A Surrogate Measure of Process Robustness: A Case Study, Proceedings of the ASME 2013 International Design Engineering Technical Conferences under 18th Design for Manufacturing and the Life Cycle conference, 2013

43 Mondal S. C., A Study on Process Capability Indices in Forging and Hardening and Tempering Processes, pp. ID:0505, 3rd International Conference on Production and Industrial Engineering (CPIE2013), 2013

44 Roy Choudhury, S. and Mondal S. C., A Comparison of Performance in die casting and drop forging processes, pp. ID:MP-102, 4th International and 25th All India Manufacturing Design and Research Conference (AIMTDR 2012), 2012

45 Mondal, S.C., Maiti, J. and Ray, P.K., Process Capability Analysis of a Centrifugal Casting Process, Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management (IEOM 2010), 2010

1 Bharat Sai Metta, Mondal S.C. and Kumar, Vikash, Optimization of Battery Tab Interconnects by Micro-TIG Welding using Simulated Annealing Algorithm and RSM, Design in the Era of Industry 4.0; In Research into Design for a Connected World, Springer Nature, SingaporeVol. 3, pp. 283- 293, , 2023 2 Gangwar Sukhdev, Mondal S.C. and Ghadai, Ranjan Kumar, Comparative Analysis of Various MCDM Techniques for the Optimization of W-DLC Coatings for Tool Materials of High Speed Steel and Cemented Carbde, Smart Innovation, Systems and Technologies book series (SIST, volume 346), Springer Nature, Singapore3, pp 271–281, , 2023 3 Kundu S., Mondal S.C., Development of Al–Cu Metal Matrix Composite Using Powder Metallurgy Technique, Design for Tomorrow—Volume 3. Smart Innovation, Systems and Technologies, Springer Nature, Singapore,Vol. 223, , 2021 4 Subrata Mandal, Goutam Paul, and S. C. Mondal, Experimental Investigation on the Effect of Process Parameters for CNC Turning of UNI Al 3055 Alloy Under MQCL Based Cooling Technique, Machines, Mechanism, and Robotics, Publisher: Springer Nature, Singapore, Sequence number:63, 2019

5 S. Mondal, G. Paul, S. C. Mondal, Investigation into the Application of Liquid CO 2 and MQL for CNC Turning of Al Alloy 3055, In Research into Design for a Connected World, Springer Nature, Singaporepp. 977-987, , 2019

6 Mandal, P. and Mondal, S. C., Investigation on the Performance of Copper-Coated 6061 Aluminium Alloy Electrode in Electric Discharge Machining, In Research into Design for a Connected World, Springer Nature Singapore,pp. 345-355, , 2019

7 Ranjan Kr Ghadai, Soham Das, Subhas C hMondal, Bibhu P Swain, Investigation of Structural and Electronic Environments of Nitrogen-Doped CVD-Grown DLC Films, Lecture Notes in Electrical Engineering book series, Scopus, Springer443, pp. 301-306, , 2017

8 Ghadai, R. K., Das, S., Mondal, S. C. and Swain, B.P., Investigation of Structural and Electronic Environments of Nitrogen-Doped CVD-Grown DLC Films, Advances in Electronics, Communication and Computing,Springer Publicationpp 301-306, , 2017

9 Mondal, S. C., Ghosh, G. and Mandal, P., Application of Genetic Algorithm for the Optimization of Process Parameters in Keyway Milling, Research into Design for Communities, Volume 1, Smart Innovation, Systems and Technologies 65, Springer Nature Singapore Pte Ltd, 2017 10 Saha, A. and Mondal, S. C., Welding Parameters Optimization in MMAW Assisted Nano-Structured Hardfacing Using Desirability Function Analysis Embedded With Taguchi Method, Research into Design for Communities, Volume 1, Smart Innovation, Systems and Technologies 65, Springer Nature Singapore Pte Ltd, 2017 11 Saha, A. and Mondal, S. C., Machining Optimization of Nano-Structured Hardfaced Tool Insert in WEDM Using MOORA Method, Research into Design for Communities, Volume 1, Smart Innovation, Systems and Technologies 65, Springer Nature Singapore Pte Ltd., 2017

12 Mondal, Subhas Chandra and Mandal, Prosun, An Application of Particle Swarm Optimization Technique for Optimization of Surface Roughness in Centerless Grinding Operation, Springer Publication of ISBN: 978-81-322-2228-6Chapter 59, pp. 687-697, , 2015

13 Mondal, S. C. and Saha, A., Optimization of process parameters in submerged arc Welding using multi-objectives Taguchi method, Advances in Material Forming and Joining of Springer Publication, 2014