1
Jayanta Kumar Saha, Rahul Samanta, Gurudas Mandal, Muralidhar Yadav and Swarup Kumar Ghosh, Experimental analysis of TMT bar and cold-drawn plain carbon steel spot welded mesh, 49, Sadhana, 2024
2
Swarup Kumar Ghosh and Muralidhar Yadav, Effects of Intercritical Annealing on Microstructure and Mechanical Properties of Low C-Mn Steels, Metallography, Microstructure, and Analysis, 2024
3
I. Dey, R. Saha, B. Mahato, M. Ghosh and S. K. Ghosh, Effect of Quenching and Partitioning on Microstructure and Mechanical Properties of High Carbon Nb Microalloyed Steel, 55, Metallurgical and Materials Transactions A, 2024
4
Muralidhar Yadav, Jayanta Kumar Saha and Swarup Kumar Ghosh, Surface, Chemical and Mechanical Properties of Polyurethane-Coated Galvanized Steel Sheets, 33, Journal of Materials Engineering and Performance, 2024
5
Ashutosh Kumar Gupta, Swarup Kumar Ghosh and Subhas Ganguly, Analysis of quench and partitioned steel microstructure data using artificial neural network, Journal of Metallurgy and Materials Science (JMMS), special issue on 'Computational Materials Science', 2023
6
Ashutosh Kumar Gupta, Sunny Chakroborty, Swarup Kumar Ghosh and Subhas Ganguly, A machine learning model for multi-class classification of quenched and partitioned steel microstructure type by the k-nearest neighbor algorithm, 228, Computational Materials Science, 2023
7
Muralidhar Yadav, Jayanta Kumar Saha and Swarup Kumar Ghosh, Evaluation of corrosion behaviour of galvanised, galvalume and colour-coated steel sheets, 68, Archives of Metallurgy and Materials, 2023
8
Swarup Kumar Ghosh, M. Yadav, Effect of thermal ageing on microstructure, mechanical properties, and fracture behaviour of 50% cold rolled duplex stainless steel (alloy 2507), 54, 1-17, Materials Science & Engineering Technology (Materialwissenschaft und Werkstofftechnik), 2023
9
Indrajit Dey, Kaushik Das, Rajib Saha, and Swarup Kumar Ghosh, Microstructure-Based Modeling and Estimation of Mechanical Properties of High-Carbon Steel, 94, 2300082, Steel Research International, 2023
10
Muralidhar Yadav, Jayanta Kumar Saha and Swarup Kumar Ghosh, Evaluation of mechanical and tribological behaviour of galvanized, galvalume and polyurethane-coated steel sheets, 5, 015064, Engineering Research Express, 2023
11
S. K. Ghosh and Muralidhar Yadav, Influence of processing on microstructure, mechanical properties and fracture behaviour of a cast 2507 duplex stainless steel, Metal Science and Heat Treatment, 2022
12
Vijay Kumar Gupta, Nisith Kumar Tewary, Muralidhar Yadav, Swarup Kumar Ghosh, Effect of Intercritical Rolling on the Microstructure, Texture and Mechanical Properties of Dual Phase TWIP Steel, 11, 602-616, Metallography, Microstructure, and Analysis, 2022
13
G. Mandal, I. Dey, S. Mukherjee, S. K. Ghosh, Phase transformation and mechanical properties of ultrahigh strength steels under continuous cooling conditions, 19, 628-642, Journal of Materials Research and Technology, 2022
14
M. Yadav, I. Dey and S. K. Ghosh, A comparative study on the microstructure, hardness and corrosion resistance of epoxy coated and plain rebars, 9, 056504, Materials Research Express, 2022
15
Indrajit Dey, Rajib Saha and Swarup Kumar Ghosh, Influence of microalloying and isothermal treatment on microstructure and mechanical properties of high carbon steel, 28 (7), 1662-1677, Metals and Materials International, 2022
16
I. Dey and S. K. Ghosh, Study on microstructure and mechanical properties of two stir cast 6061-Al metal matrix composites, 67 (6), 24-32, Indian Foundry Journal, 2021
17
I. Dey, R. Saha and S. K. Ghosh, Effect of low-temperature isothermal holding on microstructure and mechanical properties of hot rolled high carbon Nb microalloyed steel plate, 62, 111-125, International Journal of Materials and Product Technology, 2021
18
N. K. Tewary, S. K. Ghosh, A. Mandal, D. Chakrabarti and S. Chatterjee, Effect of annealing on the microstructure, texture and mechanical properties of a dual-phase ultrahigh-strength TWIP steel, 51, 4483-4498, Metallurgical and Materials Transactions A, 2020
19
G Mandal, S K Ghosh and S Chatterjee, Effect of Thermomechanical Controlled Processing and Quenching & Tempering on the Structure and Properties of Bainite-Martensite Steels, 65, 861-868, Archives of Metallurgy and Materials, 2020
20
G Mandal, S K Ghosh, D Chakrabarti and S Chatterjee, Influence of TMCP Parameters on Structure and Properties of Low Carbon Cu Bearing Ultra-High Strength Steel, 121, 269-275, Physics of Metals and Metallography, 2020
21
N K Tewary, A Gupta, G Mandal, S K Ghosh, A Das, P Datta and A Ghosh, Improvement of corrosion performance of DI pipe by newly invented CNSL based paint, 18, 5202-5208, Materials Today: Proceedings, 2019
22
I Dey, R Saha and S K Ghosh, Influence of Microalloying In High Carbon Pearlitic Steel, 18, 4835-4839, Materials Today: Proceedings, 2019
23
G Mandal, S K Ghosh and S Chatterjee, Effects of TMCP and QT on Microstructure and Properties of Ultrahigh Strength Steel, 18, 5196-5201, Materials Today: Proceedings, 2019
24
Indrajit Dey, Swarup Kumar Ghosh and Rajib Saha, Effects of cooling rate and strain rate on phase transformation, microstructure and mechanical behaviour of thermomechanically processed pearlitic steel, 8, 2685-2698, Journal of Materials Research and Technology, 2019
25
N K Tewary, S K Ghosh, D Chakrabarti and S Chatterjee, Deformation behaviour of a low carbon high Mn TWIP/TRIP steel, 35, 1483-1496, Materials Science and Technology, 2019
26
N. K. Tewary, S. K. Ghosh, R. Saha and S. Chatterjee, Deformation and annealing behaviour of a low carbon high Mn TWIP steel microalloyed with Ti, 99, 2487-2516, Philosophical Magazine, 2019
27
I Dey, A Agarwal, R Saha, S K Ghosh, The influence of microstructural characteristics on the properties of high carbon Nb microalloyed steel, 2162, 020017, AIP Conference Proceedings, 2019
28
G Mandal, S K Ghosh, D Chakrabarti and S Chatterjee, Effects of thermo-mechanical process parameters on microstructure and crystallographic texture of high Ni–Mo ultrahigh strength steel, 7, 222-238, Metallography, Microstructure, and Analysis, 2018
29
Gurudas Mandal, Nisith Kumar Tewary and Swarup Kumar Ghosh, Enhancement of mechanical properties in bainitic steel processed from different austenitization temperatures, 89, 1700259, Steel Research International, 2018
30
S. Mitra, S. K. Ghosh and S. Mukherjee, Structure-property relationships in thermo-mechanically processed Titanium - Molybdenum steels, 5, 848-854, Materials Today: Proceedings, 2018
31
I Dey, S Chandra, R Saha and S K Ghosh, Effect of Nb micro-alloying on microstructure and properties of thermo-mechanically processed high carbon pearlitic steel, 140, 45-54, Materials Characterization, 2018
32
Pratik Mallick, Nisith Kumar Tewary, Swarup Kumar Ghosh and Partha Protim Chattopadhyay, Effect of TMCP on Microstructure and Mechanical Properties of 304 Stainless Steel, 89, 1800103, Steel Research International, 2018
33
N K Tewary, S K Ghosh, S Chatterjee and A Ghosh, Deformation and annealing behaviour of dual phase TWIP steel from the perspective of residual stress, faults, microstructures and mechanical properties, 733, 43-58, Materials Science and Engineering: A, 2018
34
G Mandal, S K Ghosh, D Chakrabarti and S Chatterjee, Correlation Between Structure and Properties of Low-Carbon Cu-Ni-Mo-Ti-Nb Ultrahigh-Strength Steel, 27, 6516-6528, Journal of Materials Engineering and Performance, 2018
35
G Mandal and S K Ghosh, Microstructural evolution and mechanical behaviour of high strength steel treated by quenching and partitioning process, 4, 9418-9422, Materials Today: Proceedings, 2017
36
G Mandal, C Roy, S K Ghosh and S Chatterjee, Structure-property relationship in a 2 GPa grade micro-alloyed ultrahigh strength steel, 705, 817-827, Journal of Alloys and Compounds, 2017
37
Subhamita Chakraborty, Partha P Chattopadhyay, Swarup K Ghosh and Shubhabrata Datta, Incorporation of prior knowledge in neural network model for continuous cooling of steel using genetic algorithm, 58, 297-306, Applied Soft Computing, 2017
38
N K Tewary, S K Ghosh and S Chatterjee, Deformation behaviour of low carbon high Mn twinning-induced plasticity steel, Special Issue Article, 1-9, Part C: Journal of Mechanical Engineering Science, 2017
39
P Mallick, N K Tewary, S K Ghosh and P P Chattopadhyay, Effect of cryogenic deformation on microstructure and mechanical properties of 304 austenitic stainless steel, 133, 77-86, Materials Characterization, 2017
40
P Mallick, N K Tewary, S K Ghosh and P P Chattopadhyay, Microstructure-tensile property correlation in 304 stainless steel after cold deformation and austenite reversion, 707, 488-500, Materials Science and Engineering: A, 2017
41
Nisith Kumar Tewary, Swarup Kumar Ghosh and Subrata Chatterjee, Effect of Al Content in Low Carbon High Manganese TWIP Steel, 706, 16-22, Key Engineering Materials, 2016
42
S. K. Nandi, N. K. Tewary, J. K. Saha and S. K. Ghosh, Microstructure, mechanical properties and corrosion performance of a few TMT rebars, 51, 476-488, Corrosion Engineering, Science and Technology, 2016
43
G. Mandal, S. K. Ghosh and S. Mukherjee, Phase transformation and mechanical behaviour of thermo-mechanically controlled processed high strength multiphase steel, 51, 6569-6582, Journal of Materials Science, 2016
44
S. Mandal, N. K. Tewary, S. K. Ghosh, D. Chakrabarti and S. Chatterjee, Thermo-mechanically controlled processed ultrahigh strength steel: Microstructure, texture and mechanical properties, 663, 126-140, Materials Science & Engineering A, 2016
45
G. Mandal, S. K. Ghosh, S. Bera and S. Mukherjee, Effect of partial and full austenitisation on microstructure and mechanical properties of quenching and partitioning steel, 676, Materials Science & Engineering A, 2016
46
N. K. Tewary, A. Kundu, R. Nandi, J. K. Saha, S. K. Ghosh, Microstructural characterisation and corrosion performance of old railway girder bridge steel and modern weathering structural steel, 113, 57-63, Corrosion Science, 2016
47
S. Chatterjee and S. K. Ghosh, Ultrahigh Strength Steel: Present Perspective and Futuristic Applications, 59, 41-47, Iron & Steel Review, 2015
48
R. Shukla, S. K. Ghosh, D. Chakrabarti and S. Chatterjee, Characterisation of Microstructure, Texture and Mechanical Properties in Ultra Low-Carbon Ti-B Microalloyed Steels, 21, 85-95, Metals and Materials International, 2015
49
N. K. Tewary, S. K. Ghosh, S. Chatterjee, Effect of Annealing on Microstructure and Mechanical Behaviour of Cold Rolled Low C, High Mn TWIP Steel, 4, 12-23, International Journal of Metallurgical Engineering, 2015
50
N. K. Tewary, B. Syed, S. K. Ghosh, S. Kundu, S. M. Shariff and G. Padmanabham, Microstructural evolution and mechanical behaviour of surface hardened low carbon hot rolled steel, 606, 58-67, Materials Science & Engineering A, 2014
51
S. Pramanik, S. Bera and S. K. Ghosh, Influence of Cold Rolling on Microstructural Evolution in 2205 Duplex Stainless Steel, 85, 776-783, Steel Research International, 2014
52
N. K. Tewary, S. K. Ghosh, S. Bera, D. Chakrabarti and S. Chatterjee, Influence of cold rolling on microstructure, texture and mechanical properties of low carbon high Mn TWIP steel, 615, 405-415, Materials Science & Engineering A, 2014
53
S. K. Ghosh, Influence of 10% Cold Rolling Reduction on Ageing Behaviour of Hot Rolled Al-Cu-Si–Mn-Mg Alloy, 95, 95-101, Journal of the Institution of Engineers (India) Series D, 2014
54
S. Chatterjee and S. K. Ghosh, Evolution of Microstructures and Mechanical Properties of Thermomechanically Processed Ultrahigh Strength Steels, 2, 92-99, International Journal of Metallurgical Engineering, 2013
55
P. S. Bandyopadhyay, S. K. Ghosh, S. Kundu and S. Chatterjee, Phase Transformation and Mechanical Behavior of Thermomechanically Controlled Processed High Strength Ordnance Steel, 138, 86-94, Materials Chemistry and Physics, 2013
56
S. K. Ghosh, S. Jha, P. Mallick and P. P. Chattopadhyay, Influence of Mechanical Deformation and Annealing on Kinetics of Martensite in a Stainless Steel, 28, 249-255, Materials and Manufacturing Processes, 2013
57
S. Banerjee, S. K. Ghosh, S. Datta and S. K. Saha, Segmentation of dual phase steel micrograph: An automated approach, 46, 2435–2440, Measurement, 2013
58
R. Shukla, S. K. Ghosh, D. Chakrabarti and S. Chatterjee, Microstructure, texture, property relationship in thermo-mechanically processed ultra-low carbon microalloyed steel for pipeline application, 587, 201–208, Materials Science & Engineering A, 2013
59
S. Chatterjee and S. K. Ghosh, Evolution of Phases and Mechanical Properties of Thermomechanically Processed Ultra High Strength Steels, 66, 611-619, Transactions of the Indian Institute of Metals, 2013
60
S K Ghosh, Anomalous Dilatometric Response in Fe–Mn–Al–Si Steel, 93, 1-5, Journal of The Institution of Engineers (India): Series D, 2012
61
S. K. Ghosh and P. P. Chattopadhyay, Phase Evolution and Mechanical Behavior of 0.36 wt% C High Strength TRIP-Assisted Steel, 83, 1163-1171, Steel Research International, 2012
62
S. K. Ghosh, D. Mahata, R. Roychaudhuri and R. Mondal, Effect of rolling deformation and solution treatment on the microstructure and mechanical properties of a cast duplex stainless steel, 35, 839-846, Bulletin of Materials Science, 2012
63
S. K. Ghosh, P. Mallick and P. P. Chattopadhyay, Effect of Cold Deformation on Phase Evolution and Mechanical Properties in an Austenitic Stainless Steel for Structural and Safety Applications, 19, 63-68, Journal of Iron and Steel Research International, 2012
64
N. Bhowmik, S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Low carbon high manganese bainitic steel, 28, 282-287, Materials Science and Technology, 2012
65
S K Ghosh, P S Bandyopadhyay, S Kundu and S Chatterjee, Copper bearing microalloyed ultrahigh strength steel on a pilot scale: Microstructure and properties, 528, 7887-7894, Materials Science and Engineering: A, 2011
66
S. Chatterjee, S. K. Ghosh, P. S. Bandyopadhyay and Sanak Mishra, Phase transformation and mechanical properties of an ultrahigh strength steel, 18, 192-199, Journal of Iron and Steel Research International, 2011
67
P. S. Bandyopadhyay, S. K. Ghosh, S. Kundu and S. Chatterjee, Evolution of microstructure and mechanical properties of thermomechanically processed ultrahigh strength steel, 42A, 2742- 2752, Metallurgical and Materials Transactions A, 2011
68
N. Bhowmik, S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, High strength low carbon hot rolled ?-ferritic steel, 27 (11), 1718-1723, microstructure and mechanical properties, Materials Science and Technology, 2011
69
S. K. Ghosh, Influence of cold deformation on the aging behaviour of Al-Cu-Si-Mg alloy, 27(3), 193-198, Journal of Materials Science and Technology, 2011
70
P. S. Bandyopadhyay, S. Kundu, S. K. Ghosh and S. Chatterjee, Structure and properties of a low-carbon, microalloyed, 42A, 1051-1061, ultra-high-strength steel, Metallurgical and Materials Transactions A, 2011
71
S. K. Ghosh, P. Mallick and P. P. Chattopadhyay, Effect of reversion of strain induced martensite on microstructure and mechanical properties in an austenitic stainless steel, 46, 3480-3487, Journal of Materials Science, 2011
72
S. K. Ghosh and S. Chatterjee, On the direct diffusion bonding of titanium alloy to stainless steel, 25, 1317–1323, Materials and Manufacturing Processes, 2010
73
H. L. Yi, S. K. Ghosh, W. Liu, K. Lee and H. K. D. H. Bhadeshia, Non-equilibrium solidification and ferrite in ?-TRIP steel, 26 (7), 817- 823, Materials Science and Technology, 2010
74
S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Effect of ageing on the mechanical properties of directly quenched copper bearing microalloyed steels, 119, 436-441, Materials Chemistry and Physics, 2010
75
S. K. Ghosh, N. Bhowmik, A. Haldar and P. P. Chattopadhyay, Effects of Cu addition on the synergistic effects of Ti - B in thermomechanically processed low carbon steels, A527, 1082-1088, Materials Science and Engineering A, 2010
76
S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, On the copper precipitation behaviour in thermomechanically processed low carbon microalloyed steels, 519, 88- 93, Materials Science and Engineering A, 2009
77
S. K. Ghosh, S. Ganguly, P. P. Chattopadhyay and S. Datta, Effect of copper and microalloying (Ti, B) addition on tensile properties of HSLA steels predicted by ANN technique, 36, 125-132, Ironmaking and Steelmaking, 2009
78
S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, The influence of copper addition on microstructure and mechanical properties of thermomechanically processed microalloyed steels, 44, 580-590, Journal of Materials Science, 2009
79
S. K. Ghosh, P. P. Chattopadhyay, A. Haldar, S. Ganguly and S. Datta, Design of the directly air – cooled pearlite - free multiphase steel from CCT diagrams developed using ANN and dilatometric methods, 48, 649-657, ISIJ International, 2008
80
S. K. Ghosh, A. Haldar, S. Ganguly and P. P. Chattopadhyay, Development of high strength Cu – Ni - Ti - B multiphase steel by direct air – cooling, 39A, 2555-2568, Metallurgical and Materials Transactions A, 2008
81
S. K. Ghosh and S. Mondal, High temperature ageing behavior of a duplex stainless steel, 59, 1776-1783, Materials Characterization, 2008
82
S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Effect of pre - strain on the ageing behavior of directly quenched copper containing microalloyed steel, 59, 1227-1233, Materials Characterization, 2008
83
S. K. Ghosh, S. Ganguly, P. P. Chattopadhyay and S. Datta, Determination of MS temperature in copper bearing microalloyed steel by the ANN technique, 47, 91-97, Canadian Metallurgical Quarterly, 2008
84
S. K. Ghosh and S. Mondal, Effect of heat treatment on microstructure and mechanical properties of duplex stainless steel, 61, 33-37, Transactions of the Indian Institute of Metals, 2008
85
S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Mechanical properties of directly air cooled copper added microalloyed steels, 23, 1375-1380, Materials Science and Technology, 2007
86
S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Effect of copper additions in directly quenched titanium – boron steels, 42, 9453-9459, Journal of Materials Science, 2007
87
S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Effect of pre - strain on the ageing behaviour of directly air – cooled copper added titanium – boron microalloyed steels, 23, 923-929, Materials Science and Technology, 2007
88
S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Dilatometric studies on copper added titanium – boron steels, 78, 903- 907, Steel Research International, 2007
89
S. K. Ghosh, S. Ganguly, P. P. Chattopadhyay and S. Datta, Modelling the Effect of Copper on Hardness of Microalloyed Dual Phase Steel through Neural Network and Neuro-fuzzy Systems, 45(9), 1345 – 1351, ISIJ International, 2005
90
S K Ghosh, A Samanta and P P Chattopadhyay, Effects of ageing treatment on the micro structure and mechanical properties of Cu-added Ti, B microalloyed steels, 57, 171-180, Transactions of the Indian Institute of Metals, 2004
91
S. K. Ghosh, N. R. Bandopadhyay and P. P. Chattopadhyay, Effects of Finish Rolling Temperature on the Microstructures and Mechanical Properties of as Hot Rolled Cu – added Ti, B Microalloyed Dual Phase Steels, 85( MM/2), 41- 48, Journal of the Institution of Engineers (India), 2004
92
S. K. Ghosh, D. Das and P. P. Chattopadhyay, Structure Property Correlation of Ti, B Microalloyed Dual Phase Steels, 82( MM/2), 50 - 57, Journal of the Institution of Engineers (India), 2001
1
Sneha Roy and Swarup Kumar Ghosh, Colour-coated steels: mechanical properties, wear resistance, and corrosion resistance, International Conference on Processing of Minerals, Metals and Materials : Beyond Tomorrow (ICPMMM2024), 2024
2
I. Dey and S. K. Ghosh, Overview of processing, microstructure and hardness of Al2O3 and SiC reinforced 6061-Al metal matrix composites, 69, 43-48, 69th Indian Foundry Congress (IFC) Technical Papers/Souvenir, September 2-5, Kolkata, 2021
3
G. Mandal, S. K. Ghosh and S. Chatterjee, Development of Advanced High Strength Steel through the Various Processing Routes, International Conference on Advanced Materials (ICAM 2019), June 12-14, Kerala, India, 2019
4
S. Chatterjee, G. Mandal and S. K. Ghosh, Effect of copper on the structure and properties of ultrahigh strength steel, National Seminar on Prospects of Copper & Copper Alloy Components in Iron & Steel Industry, 8th August, 2019, Kolkata, 2019
5
I. Dey, R. Saha and S. K. Ghosh, Effect of quenching and partitioning on microstructure and mechanical properties of hot rolled high carbon Nb microalloyed steel plate, 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), December 12-14, Rourkela, India, 2019
6
G. Mandal, S. K. Ghosh and S. Chatterjee, Development of micro-alloyed ultrahigh strength steel through thermo- mechanical controlled processing, 7th Asia Steel International Conference, February 6-9, Bhubaneswar, Odisha, India, 2018
7
I. Dey, N. K. Tewary, S. K. Ghosh and S. Chatterjee, Low carbon high manganese micro-alloyed TWIP steel: microstructure and mechanical properties, 7th Asia Steel International Conference, February 6-9, Bhubaneswar, Odisha, India, 2018
8
P. Mallick, N. K. Tewary, S. K. Ghosh and P. P. Chattopadhyay, Effect of cryogenic deformation and reversion annealing on microstructure and mechanical properties of austenitic stainless steel, 7th Asia Steel International Conference, February 6-9, Bhubaneswar, Odisha, India, 2018
9
C. Roy, S. K. Ghosh and S. Chatterjee, Evolution of Microstructure and Mechanical Behaviour of Thermo-Mechanically Processed Micro-alloyed Ultrahigh Strength Steel, National Conference on Advances in Materials Processing and Characterization (NCAMPC 2016), January 4-6, Warangal, India, 2016
10
S. Chandra, R. Saha and S. K. Ghosh, Influence of Nb micro-alloying on microstructure and mechanical properties of thermo-mechanically processed high carbon steel, National Conference on Advances in Materials Processing and Characterization (NCAMPC 2016), January 4-6, Warangal, India, 2016
11
N. K. Tewary, S. K. Ghosh and S. Chatterjee, Microstructure evolution in cold rolled TWIP steels, Proceedings of Research Scholars Colloquium (ISBN:978-93-80813-44-8); 23-24 August, 2016, IIEST, Shibpur, India, 2016
12
G. Mandal, S. K. Ghosh and S. Chatterjee, Development of ultrahigh strength steel by thermo-mechanical controlled processing, 1-8, National Seminar on Advancement in Ultra Clean Steel Technologies and Thermo-mechanical Processing for Defence Applications (AUSTPD-2016), August 19, Ishapore, India, 2016
13
P. Mallick, S. K. Ghosh and P. P. Chattopadhyay, Enhancement of mechanical properties of austenitic stainless steel subjected to cryogenic rolling and annealing processes, International Conference on Rolling and Finishing Technology of Steel (RAFTS 2015), September 8-10, Ranchi, India, 2015
14
S. Chatterjee and S. K. Ghosh, High Strength Steel: Present Perspective and Future Application, International Conference on Advanced Materials and Energy Technology (ICAMET 2014), 17th to 19th December, IIEST, Shibpur, 2014
15
S. Mandal, A. Chakraborty, S. K. Ghosh, and S. Chatterjee, Thermomechanically controlled processed low carbon ultrahigh strength steel: phase transformation, microstructure and mechanical properties, International Conference on Science and Technology of Ironmaking and Steelmaking (STIS–2013), December 16-18, Jamshedpur, India, 2013
16
S. K. Ghosh, Effect of ageing on microstructure and mechanical properties of a cast duplex stainless steel, National Workshop on Heat Treatment of Steels, February 10-11, IIM Kolkata Chapter, 2012
17
S. Chatterjee and S. K. Ghosh, Evolution of Microstructures and Mechanical Properties of Thermomechanically Processed Ultrahigh Strength Steels, International conference on thermo-mechanical simulations and processing of steels, (Simpro ’12), December 12-14, Ranchi, India, 2012
18
S. Chatterjee, S. K. Ghosh, P. S. Bandopadhyay and Sanak Mishra, Phase transformation and mechanical properties of an ultrahigh strength steel, The 6th International Conference on High Strength Low Alloy Steel (HSLA Steel ’2011) Beijing, China, May 31 - June 2, 2011
19
N. Bhowmik, S. Das, S. K. Ghosh, P. P. Chattopadhyay and A. Haldar, Development of low carbon high strength high ductility steel, International Conference on High Manganese Steels (HMnS 2011), May 15-18, Seoul, South Korea, 2011
20
N. Bhowmik, S. Das, S. K. Ghosh, P. P. Chattopadhyay and A. Haldar, Evolution of microstructures and properties in a high Mn bainitic steel, International Conference on High Manganese Steels (HMnS 2011), May 15-18, Seoul, South Korea, 2011
21
S. K. Ghosh, P. Mallick and P. P. Chattopadhyay, Kinetics of Annealing in a Cold Worked Austenitic Stainless Steel, National Conference on Recent Advances in Materials Science & Engineering: A Multidisciplinary Approach (RAMSE 2010), October 23-24, Guna, India, 2010
22
S. K. Ghosh, A. Haldar and P. P. Chattopadhyay, Ageing Behaviour of Directly Quenched Copper Added Titanium - Boron Microalloyed Steels, International Conference on Microalloyed Steels: Emerging Technologies and Applications, March 9-11, Kolkata, India, 2007
23
S. K. Ghosh, S. Ganguly, P. Pal, A. Haldar and P. P. Chattopadhyay, Cu – Ni - Ti – B Multiphase Steel, International Conference on Microalloyed Steels: Emerging Technologies and Applications, March 9-11, Kolkata, India, 2007
24
S. K. Ghosh, A. Halder and P. P. Chattopadhyay, Effect of Cu Addition in Multiphase Ti, B Microalloyed Steel, International Conference on Advanced Materials and Materials Processing (ICAMMP 2006), February 3-5, IIT Kharagpur, India, 2006
25
S. K. Ghosh, P. Pal, P. P. Chattopadhyay and S. Dutta, ANN Model for Assessment of Ms Temperature in Copper Added Ti, B Microalloyed Steel, International Conference on Advanced Materials and Materials Processing (ICAMMP 2006), February 3-5, IIT Kharagpur, India, 2006
26
S. K. Ghosh, S. Ganguly, S. Datta and P.P. Chattopadhyay, Design of pearlite free air-cooled Cu added Ti, B microalloyed steel from ANN prediction of CCT diagrams, International Workshop on Neural Network & Genetic Algorithm in Materials Science & Engineering (NGMS-2006), January 11-13, BESU, Shibpur, 2006
27
S. K. Ghosh and P. P. Chattopadhyay, Microstructural evolution in Cu- added Ti, B microalloyed dual phase steel, International Conference on Advances in Materials & Processes for industrial Applications and Materials Show 2003, September 25-27, ASM International, Pune Chapter, Pune, India, 2003
28
S. K. Ghosh and P. P. Chattopadhyay, Effect of minor Cu-addition on microstructural evolution in Cu- added Ti, B microalloyed dual phase steel, Asia Steel International Conference, April 9-12, Tata Steel, Jamshedpur, India, 2003
29
S.K.Ghosh and S.Chatterjee, Development of Diffusion Bonded Joints of Ti-6Al-4V and 304L Stainless Steel, Abstracts Vol. of 7th West Bengal State Science and Technological Congress, J.U., Calcutta – 32., Abstracts Vol. of 7th West Bengal State Science and Technological Congress, 3, MMM -9, 2000