| # | List of Publication by Dr. Bidyut Pal |
|---|---|
| 1 | Loha T, Pal B, Finite element analysis of a porous hip implant: effects of interface characteristics on strain shielding, 1st International Conference on Mechanical Design and Manufacturing (ICMDM 2023), Indian Institute of Engineering Science and Technology, Shibpur, Howrah, India, 27-28th April, 2023 |
| 2 | Pradeep K, Pal B, Do the variations in the spinal ligament modelling approach influence the load transfer and ranges of motion in finite element analysis of the intact lumbar spine?, 1st International Conference on Mechanical Design and Manufacturing (ICMDM 2023), Indian Institute of Engineering Science and Technology, Shibpur, Howrah, India, 27-28th April, 2023 |
| 3 | Nath S, Mahapatra B, Mahesh PVS, Pal B, Finite Element Analysis of a femoral neck fracture fixation: Effects of interfacial conditions, 1st International Conference on Mechanical Design and Manufacturing (ICMDM 2023), Indian Institute of Engineering Science and Technology, Shibpur, Howrah, India, 27-28th April, 2023 |
| 4 | Arrif IM, Shuib S, Anuar MAM, Shokri AA, Pal B, Aziz I, Design and Finite Element Analysis of Total Knee Replacement for Additive Manufacturing, 2571 (1), 030006 (1-8), AIP Conference Proceedings, 22 June 2023, Proceedings of the World Congress on Science, Engineering and Technology (WCOSET) 2021, Shah Alam, Malaysia, 2023 |
| 5 | Chaudhuri A, Mahato PK, Pal B, Comparison of mechanical properties of Ti64 Body-Centred-Cubic (BCC) with Cubic porous scaffolds for orthopedic applications, 9th World Congress of Biomechanics (WCB 2022), Taipei, Taiwan, 10-14 July, 2022 |
| 6 | Ghosh A, Kundu V, Bhattacharya S, Mondal T, Pal B, Prediction of the Risk of Damage of the Lateral Collateral Ligaments due to Ankle Sprain using OpenSim, 9th World Congress of Biomechanics (WCB 2022), Taipei, Taiwan, 10-14 July, 2022 |
| 7 | Loha T, Mukherjee K, Pal B, Prediction of Bone Ingrowth into a Porous Hip-Stem Using Mechanoregulatory Algorithm, 9th World Congress of Biomechanics (WCB 2022), Taipei, Taiwan, 10-14 July, 2022 |
| 8 | Singh A, Roy SS, Pal B, A comparative analysis of musculoskeletal models to predict musculoskeletal forces, Presented at the International Conference on Progressive Research in Industrial and Mechanical Engineering, National Institute of Technology Patna, 5-7 August, 2021 |
| 9 | Ghosh A, Kundu V, Bhattacharya S, Pal B, Prediction of ATFL Injury in inversion ankle sprain using OpenSim, presented in the International Conference on Applications in Computational Engineering & Sciences 2021 (virtual mode), VIT Chennai, India, 20th October, 2021 |
| 10 | Majumder N, Pal B, Ankle inversion injuries may be prevented by landing on two legs Instead of one, presented in the International Conference on Applications in Computational Engineering & Sciences 2021 (virtual mode), VIT Chennai, India, 20th October, 2021 |
| 11 | Loha T, Bhattacharya R, Pal B, Investigations on Mechanical behaviour of a low stiff hip implant using finite element analysis, presented in the International Conference on Applications in Computational Engineering & Sciences 2021 (virtual mode), VIT Chennai, India, 20th October, 2021 |
| 12 | Porika R, Pal B, Finite element analysis of porous metallic structures for application on a low-stiff hip implant, International Conference on Applications in Computational Engineering & Sciences, VIT (Deemed to be University), Chennai, India, 30-31st October, 2020 |
| 13 | Ridzwan MIZ, Pal B, V Arkel R, Khanna M, Fetherston S, Honeyfield L, Abel R, Cobb J, Hansen U, FE Prediction of Critical Falling Configurations in High Risk Fracture Patients, 8th World Congress of Biomechanics, Dublin, Ireland, July 8-12, 2018 |
| 14 | Ridzwan MIZ, Sukjamsri C, Pal B, Khanna M, Abel R, Cobb J, Hansen U, Digital Volume Correlation Approach for Measuring Bone Strain and Failure during a Sideways Fall Configuration, 8th World Congress of Biomechanics, Dublin, Ireland, July 8-12, 2018 |
| 15 | Manda K, Pal B, Tong J, A multiscale bone remodelling model coupling mechanics with biology, Bioengineering in Ireland, 24th Annual Conference of the Section of Bioengineering of the Royal Academy of Medicine in Ireland, The Johnstown Estate Hotel & Spa, Enfield, Co. Meath, Ireland, Jan 26-27, 2018 |
| 16 | Pal B and Amis A, Finite element analysis of a novel hip-stem for osteoporotic femurs, Proceedings of the 40th annual meeting of the American Society of Biomechanics, Raleigh, North Carolina, USA, August 2-5, 2016 |
| 17 | Pal B and Amis A, A novel hip-stem for osteoporotic femurs, Proceedings of ‘Hip Surgery: A joint Engineering and surgical challenge’, a conference organised by The Institution of Mechanical Engineers, London, UK, November 3-4, 2015 |
| 18 | Pal B, Correa T, Vanacore F, Amis A, A Novel Revision Total Knee Replacement System With Extracortical Fixation: Assessment of Strain Shielding Patterns Compared With Conventional Intramedullary Fixation, 28th Annual Congress of International Society for Technology in Arthroplasty, Vienna, Austria, September 30 - October 3, 2015 |
| 19 | Ridzwan MIZ, Pal B, Hansen U, A Finite Element Modelling Approach to Predict Clinically Relevant Hip Fractures, 7th World Congress of Biomechanics, Boston, Massachusetts, USA, July 6-11, 2014 |
| 20 | Mukherjee K, Pal B, Gupta S, Analysis of Failure Mechanisms in Cemented Short-Stem Femoral Resurfacing Implant, 25th Annual Congress of International Society for Technology in Arthroplasty, Sydney, Australia, October 3-6, 2013 |
| 21 | Mukherjee K, Pal B, Gupta S, Bone adaptation around a cemented short-stem ceramic femoral resurfacing component, The proceedings of 18th Congress of the European Society of Biomechanics, Lisbon, Portugal, July 1-4, 2012 |
| 22 | Ridzwan M, Pal B, Hansen U, Finite Element Prediction of Hip Fracture during a Sideways Fall, 6, 476-479, Proceedings of International Conference on Biomechanics, Lucerne, Switzerland, International Journal of Biomedical and Biological Engineering, 2012 |
| 23 | Ridzwan M, Pal B, Hansen U, Amis A, Progressive failure in the femoral neck during a sideways fall, 20th Annual Meeting of the European Orthopaedic Research Society, Amsterdam, The Nederlands, September 26-28, 2012 |
| 24 | Ghosh R, Pal B, Ghosh D, Gupta S, Pre-clinical Evaluations on Uncemented Acetabular Component Designs, 24th Annual Congress of International Society for Technology in Arthroplasty, Brugge, Belgium, September 20-23, 2011 |
| 25 | Ghosh R, Pal B, Ghosh D, Gupta S, Load transfer across the pelvic bone during normal walking, 35th Annual meeting of the American Society of Biomechanics, Long Beach, California, USA, August 10-13, 2011 |
| 26 | Pal B, Gupta S, New AMR, A numerical study on exploring the possibilities of cementless femoral resurfacing, The proceedings of 17th Congress of the European Society of Biomechanics, Edinburgh, UK, July 5-8, 2010 |
| 27 | Pal B, Ghosh D, Gupta S, New AMR, Experimental measurements of strains and micromotions in the resurfaced femurs, The proceedings of 17th Congress of the European Society of Biomechanics, Edinburgh, UK, July 5-8, 2010 |
| 28 | Pal B, Gupta S, New AMR, Effects of change in stem length on the mechanics of a resurfaced femur, 6th World Congress on Biomechanics, Singapore, August 1-6, 2010 |
| 29 | Ghosh R, Pal B, Ghosh D, Gupta S, New AMR, Pre-clinical analysis of uncemented metallic acetabular component, The proceedings of 17th Congress of the European Society of Biomechanics, Edinburgh, UK, July 5-8, 2010 |
| 30 | Ghosh R, Pal B, Ghosh D, Gupta S, New AMR, Finite element analysis of uncemented acetabular component designs, 6th World Congress on Biomechanics, Singapore, August 1-6, 2010 |
| 31 | Ghosh R, Pal B, Ghosh D, Gupta S, Three-dimensional finite element analyses of a natural pelvis and an uncemented acetabular replacement, International conference on theoretical, applied, computational and experimental mechanics. IIT Kharagpur, India, December 27-29, 2010 |
| 32 | Pal B, Gupta S, New AMR, A combined bone remodelling and contact analysis for the resurfaced femur, 41 (S 1), S66, The proceedings of 16th Congress of the European Society of Biomechanics, Lucerne, Switzerland, Journal of Biomechanics, 2008 |
| 33 | Pal B, Gupta S, Biomechanical Analysis of Resurfaced Femoral Head, Proceedings of 52nd Congress of Indian Society of Theoretical and Applied Mechanics (An International Meet), BNMIT, Bangalore, India, December 14-17, 2007 |
| 34 | Pal B, Banerjee S, Banerjee PS, Biomedical Applications of Rapid Prototyping, Proceedings of Conference on Emerging Trends in Materials and Advanced Manufacturing Processes, organised by ASM International, Pune Chapter, India, February 23-24, 2006 |
| 35 | Pal B, Chakraborty D, Pal S, Biswas B, Measurement of Biting and Chewing Forces using newly Developed Instrumentation, Proceedings of National Conference on Emerging Trends in Biomedical Instrumentation, Birla Institute of Technology, Mesra, India, April 29-30, 2005 |
| 36 | Chakraborty D, Pal B, Pal S, Stress Analysis of Human Hip Joint using CT scan Data, National Conference on Biomechanics, Indian Institute of Technology Delhi, November 19-21, 2004 |
Created: 23 November 2019