# | List of Publication by Dr. Niloy Khutia |
---|---|
1 | G Shinde,S Garai,S Shrivastav, N Khutia, Flight Dynamics Modelling and Control of Flexible Wing Unmanned Aerial Vehicle, Symposium on Applied Aerodynamics and Design of Aerospace Vehicle, Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2023), February 09 -11, 2023, Hyderabad, India, 2023 |
2 | K. Bhowmik, H. Ambati, N. Khutia, A. Roy Chowdhury, Prediction of Elastic Constants of Spiral MWCNT Reinforced Nanocomposites by Finite Element Analysis, 37, 449–458, In: Maiti D.K. et al. (eds) Recent Advances in Computational and Experimental Mechanics, Vol–II, Lect. Notes Mech. Eng., Springer, 2022 |
3 | Mallick M.,Chakrabarty A., Khutia A., Genetic algorithm based design optimization of crashworthy honeycomb sandwiched panels of AA7075-T651 aluminium alloy for aerospace applications, 1st International Conference on Materials Science and Mathematics for Advanced Technology (MSMAT 2021), Materials Today: Proceedings, Elsevier, 10 November 2021, 2021 |
4 | Chakrabarty A., Chakraborty P., Sahu V.K., Gurao N.P., Khutia N., Investigation of Strain Localization in Additively Manufactured AlSi10Mg using CPFEM, Indo-Korean Workshop on Multi-Functional Materials for Extreme Loading , IIT Madras-Hanyang University, MFMEL-2021, February 22-24, 2021., 2021 |
5 | Basantia S.K.,Prustya P.K.,Das D.,Khutia N., Micro-scale simulation of nanoindentation characteristics in dual-phase steel, Materials Today: Proceedings, Elsevier, 2020 |
6 | Vibhanshu Pandey, Partha Pratim Dey, Niloy Khutia, Suneel K Gupta, Development of Modified Cyclic Plasticity Model To Simulate Cyclic Behavio Behaviour For Sa333-Mn Steel Under LCF Loading Conditions, International Conference on Recent Developments in Mechanical Engineering (ICRAME 2020), 07-09 February 2020, NIT Silchar, India, 2020 |
7 | K. Bhowmik, H. Ambati, N. Khutia and A. Roy Chowdhury, Prediction of Elastic Constants of Spiral MWCNT Reinforced Nanocomposites by Finite Element Analysis, International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM-2020), September 04-06, Indian Institute of Technology, Kharagpur, 2020 |
8 | Mainak Mallick,Aniket Chakrabarty,Niloy Khutia, Design optimization of honeycomb sandwich panel through Genetic Algorithm, Indian Society of Theoretical and Applied Mechanics (ISTAM), 2020 |
9 | Das P., Khutia N., Dey P. P., Gupta Suneel. K., Arora P., Experimental Analysis and Simulation of Cyclic Plastic Behaviour under Uniaxial Multi Step Low Cycle Fatigue of 304 LN Stainless Steel, International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (December 5-7, 2019), Organized by Indian Institute of Technology Ropar, India, Society of Mecahn, 2019 |
10 | Firoz R., Chakrabarty A., Khutia N., Bar H. N., Study of Deformation and Fracture Behavior of Inconel 718 through Experiments and FE Analysis with GTN Model, Inernational Conference on Advanced Materials and Processes for Defence Applications (ADMAT 2019), Sept 23-25, 2019 |
11 | Das P., Khutia N., Dey P. P., Gupta S. K., Cyclic plasticity model with modified isotropic hardening rule for low cycle fatigue life prediction of SA333 GR.6 carbon steel, Pages 127-130, Proceedings of the 1st International Conference on Mechanical Engineering (INCOM18), Jadavpur University 4th – 6th January, 2018 |
12 | Basantia S. K., Khutia N., Das D., Microstructure Based FE Simulation to Predict Flow Behaviour of Dual Phase Steel Through RVE Approach, Pages 131-134, Proceedings of the 1st International Conference on Mechanical Engineering (INCOM18), Jadavpur University 4th – 6th January, 2018 |
13 | Singh, V, Basantia, S.K., Bhattacharya, A., Das, D., Khutia, N., Low cycle fatigue analysis of ferrite-martensite dual-phase steel using advanced cyclic plasticity models, 377(1),13 July 2018,Article number 012161, 1st International Conference on Mechanical, Materials and Renewable Energy, ICMMRE 2017; Majitar, East Sikkim; India; 8 December 2017 through 10 December 2017; Code 137950, 2018 |
14 | Bhowmik K., Kumar P., Khutia N., Chowdhury AR., Estimation of Effective Directional Strength of Single Walled Wavy CNT Reinforced Nanocomposite, 338(1), April 2018, Article number 012016, IOP Conference Series: Materials Science and Engineering; Materials Science and Engineering; 7th National Conference on Processing and Characterization of Materials, NCPCM 2017; National Institute of , 2018 |
15 | Basantia SK., Singh V., Bhattacharya A., Khutia N., Das D., Prediction of Tensile Behaviour of Ferrite-Martensite Dual Phase Steel using Real Microstructure-based RVE Simulations, 377(1), 13 July 2018, Article number 012057, 1st International Conference on Mechanical, Materials and Renewable Energy, ICMMRE 2017; Majitar, East Sikkim; India; 8 December 2017 through 10 December 2017; Code 137950, 2018 |
16 | Bhowmik K., Kumar P., Khutia N., Roy Chowdhury A., Evaluation of Directional Strength of SWCNT Reinforced Nanocomposites: A Finite Element Study, Volume 5, Issue 9, 2018, Pages 20528-20534, Materials Today: Proceedings; 8th International Conference on Materials Processing and Characterization, ICMPC 2018; Hyderabad; India; 16 March 2018 through 18 March 2018; Code 140097, 2018 |
17 | Bhowmik K., Nandy T., Kumar P., Khutia N., Roy Chowdhury A., Prediction of Directional Young's Modulus of Particulate Reinforced MMC using Finite Element Methods, Volume 377, Issue 1, 13 July 2018, Article number 012057, IOP Conf. Series: Materials Science and Engineering 377 (2018) 012057; International Conference on Mechanical, Materials and Renewable Energy,, 2018 |
18 | Chakrabarty A., Khutia N., Bar H. N., Dey P. P., Sivaprasad S., Effect of Loading Variations on Damage of SA333 C-Mn Steel, Volume 4, Issue 2, 2017, Pages 415-423, Materials Today: Proceedings;Proceedings of 5th International Conference on Materials Processing and Characterization (ICMPC-2016), 12th to 13th March, 2016, GRIET, Hyderabad, 2017 |
19 | Das B. K., Bakkar Md Abu, Khutia N., Das D. D., Low Cycle Fatigue Performance Evaluation of TMT rebar, Volume 4, Issue 2, 2017, Pages 2554-2563, Materials Today: Proceedings;Proceedings of 5th International Conference on Materials Processing and Characterization (ICMPC-2016), 12th to 13th March, 2016, GRIET, Hyderabad, 2017 |
20 | Basantia S. K., Md Abu Bakkar, Khutia N., Das D., Simulation of LCF Characteristics of AA6063 Al Alloy under Different Aging Conditions, Volume 2, Issue 4-5, 2015, Pages 2226-2235, Materials Today: Proceedings;Proceedings of 4th International Conference on Materials Processing and Characterzation (ICMPC-2015), 14th to 15th March 2015,GRIET, Hyderabad, 2015 |
21 | Singh R. B., Khutia N., Dey P.P., Sivaprasad S., Evaluation of uniaxial and multiaxial fatigue of carbon steel through experiment and simulation using advanced kinematic hardening models, Pages 279-282, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2014), Nara, Japan,10th to 13th October, 2014 |
22 | Khutia N., Dey P.P., Sivaprasad S., Modification of Ohno Wang cyclic plasticity model through simulation and experimentation of 304LN stainless steel specimen, Pages 243-246, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2014), Nara, Japan,10th to 13th October, 2014 |
23 | Roy S., Khutia N., Das D., Roy Chowdhury A, FE analysis and deformation behavior of laser based porous Ti6Al4V using static loading condition, Pages 305-307, Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2014), Nara, Japan,10th to 13th October, 2014 |
24 | Roy S., Biswas J., Panda D., Deb A., Bhowmik S., Khutia N., Roy Chowdhury A., Finite element study on crack development of titanium alloy (Ti6Al4V) specimen, Indian Conference on Applied Mechanics, Indian Conference on Applied Mechanics, INCAM-2013, 4th to 6th July, IIT Madras, 2013 |
25 | Das P., Khutia N., Dey P.P., Sensitivity analysis of Chaboche parameter for characterization of cyclic plasticity behavior, International Conference on Computer Aided Engineering (CAE-2013), IIT Chennai, Pages 465-470, 2013 |
26 | Khutia N., Dey P. P., Optimization of input material parameters for Ohno-Wang hardening model using Genetic Algorithm, Pages 574-579, International Conference on Computer Aided Engineering (CAE-2013), IIT Chennai, 19th to 21st December, 2013 |
27 | Roy, S., Khutia, N., Roy Choudhury, A., Weight and Natural Frequency Optimization of Automotive Engine Oil Sump Using Fibre Reinforced Composite Laminates, Third Asian Conference on Mechanics of Functional Materials and Structures, 2012 (ACMFMS 2012) held at IIT Delhi, 2012 |
28 | Roy, S., Panda, P., Deb, A., Bhowmick, S., Khutia, N., Roy Choudhury, A., Response of the effective modulus for different percentage of pore volume and pore size, Indian Society of Theoretical and Applied Mechanics, 2012 (ISTAM 2012) held at DIAT, Pune, 2012 |
29 | Roy, S., Panda, P., Deb, A., Bhowmick, S., Khutia, N., Roy Choudhury, A., Response of the effective modulus for different percentage of pore volume and pore size, Indian Society of Theoretical and Applied Mechanics, 2012 (ISTAM 2012) held at DIAT, Pune, 2012 |
Created: 23 November 2019